Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Janko Keyboard Melodica Conversion  (Read 11785 times)

0 Members and 1 Guest are viewing this topic.

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica Conversion
« Reply #20 on: October 02, 2019, 10:54:36 AM »

Progress in my Janko Melodica project.  Here’s a pic (I hope!) of the version 2, which uses a very inexpensive 32 key base.  Cosmetically much neater, and structurally stronger, since it uses overlaid key extensions and thicker buttons, but doesn’t require hacking all the keys up.  Adds only about 3/8 inch to total height.  Still quite a bit of fussy work, but plays very well, and surprisingly good sound for what it is.  I am really imagining a cottage industry based on converting Yamahas or Suzukis, since they sound better and still aren’t horribly expensive.  Suggestions or comments from this great group will be much appreciated.

Thanks, and regards,

David
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica: a little tune sample
« Reply #21 on: May 08, 2020, 07:20:40 PM »

I’ve struggled for a while trying to master what should have been simple, but because I am simple, it wasn’t.

https://youtu.be/IkX5lb-YXiM


Anyway, here’s a cheerful short video of the great Adlai Waksman playing a little tune on my initial prototype Janko Melodica conversion.  It’s on the crude side, but proves the concept, I think.  And, Adlai had exactly 30 seconds on this instrument before he played the tune.  The next version looks better, but is on a less-robust instrument.  The third one will be on a Yamaha 32 key, and if that works as it should, a 36 or 42 key Suzuki on the horizon.

Thanks, and regards,

David
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Janko Keyboard Melodica Conversion
« Reply #22 on: May 08, 2020, 08:02:03 PM »

So yeah, this is still rad. Since I still think piano keyboards are dumb, I would have bought a melodica that used a keyboard in this style, and would probably convert the one I have if it was inexpensive to do so.
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica Conversion
« Reply #23 on: May 08, 2020, 09:53:40 PM »

Well, Gena, since ya’ mentioned it...my early fantasy was to produce these as some kind of cottage industry, and I thought I’d sell ‘em for a hundred or two USD.  Of course, that presupposed a broad range of initial prices for the “donor” instruments, and some economies of scale in the fabrication, so the look would be more “finished” than the prototypes.

Now,  in reality, I am happy to tell you that I probably spent less than 30 bucks each to modify the two so far.  With the Yamaha cost about 30 USD and the “Cahaya” 17 USD delivered, the total cost was less than $60 and less than $50, including the melodicas!

Here’s the idea.  I used inspirational YouTube videos (I am sorry I can’t remember whose, now...must go back and look.  “Janko Melodica Conversion” I think found them.)  One required much complex build-up of different height button rows, and the other required complete removal of all keys and springs, hacking all white keys to the narrowness of black keys, and all black keys to the lower height of the whites.  Yucky, smelly industrial work; lots of ragged gaps still visible from key surgery. That’s the Yamaha Adlai plays in the video. 

So, I went with the “Colpitts Version” for the second, and for any future versions.  My difference (a unique contribution, I think, but am not sure) is to just make auxiliary wooden key tops of identical l/r narrowness, like the black keys.  The “secret” is to make all the white keys taller, so they are just as tall as the combination of the black keys and their additional key tops, so the combined height of all keys is the same, and the keyboard is level.  The work is careful crafty work, or light industrial, and the fuss is to keep everything straight and level.  Then, the right buttons, the right glue to hold together, et voila. 

If you have access to tools, like a tablesaw, you can probably do the job for 10 dollars.  I spent a bit on art-store craft lumber (basswood) so I would’nt  need to do much machine work.  Come to think of it, I took hours to do them, and if I sold one for a hundred I’d be working at about minimum wage.  But for a DIY project...maybe just the thing for COVID-confinement.

The picture I posted earlier (not the video) is the second version.  I can post closeups and answer any questions you might have.

Regards,

David
Logged

Corinto

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 233
  • Spain/Brasil/Belgium
Re: Janko Keyboard Melodica Conversion
« Reply #24 on: May 09, 2020, 09:04:40 AM »

So, I went with the “Colpitts Version” for the second, and for any future versions.  My difference (a unique contribution, I think, but am not sure) is to just make auxiliary wooden key tops of identical l/r narrowness, like the black keys.  The “secret” is to make all the white keys taller, so they are just as tall as the combination of the black keys and their additional key tops, so the combined height of all keys is the same, and the keyboard is level.  The work is careful crafty work, or light industrial, and the fuss is to keep everything straight and level.  Then, the right buttons, the right glue to hold together, et voila. David.

Hi David,
Great to see you're still on this project.
Here and now with this lockdown I'm working on the conversion of a little Hohner PA, with a very similar system as yours.
Will post some pictures when available to see the progress.
Logged
Carpe diem, C.

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica Conversion
« Reply #25 on: May 09, 2020, 12:27:08 PM »

Yes, please.  Pictures!  I am imagining a world-sweeping revolution!  While I am getting “OK” along the rows on diatonic like my D/C# box and my Anglos, the real future for anything “off the rows” for me is the Hayden duets and Janko stuff.  How light can a piano accordion “donor box” be?

Seriously, it seems there are at least six of us, worldwide, who might be into such instruments.  Think there might be more, once you make a “serious” iteration?

Regards,

David
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Janko Keyboard Melodica Conversion
« Reply #26 on: May 09, 2020, 12:46:13 PM »

Mmmm now I have spare time and one of these, pokerwork size


David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica Conversion
« Reply #27 on: May 09, 2020, 12:53:54 PM »

There you go, Lester.  If you (and I know you do) have a tablesaw and some stable  wood, the most expensive part will be the buttons!  You are probably down to your last few hundred buttons, though.  Seriously, that was a search.  With same-height rows, the buttons have to be smaller than the key width, by a hair, so’s they don’t make an “auto chord” with their half-step neighbors.

David
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Janko Keyboard Melodica Conversion
« Reply #28 on: May 14, 2020, 09:36:14 AM »

So yeah, this is still rad. Since I still think piano keyboards are dumb, I would have bought a melodica that used a keyboard in this style, and would probably convert the one I have if it was inexpensive to do so.
You think piano keyboards are dumb? :D I’ve been looking at CBA layouts and they aren’t much less dumber... :D :D

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Janko Keyboard Melodica Conversion
« Reply #29 on: May 14, 2020, 10:16:01 AM »

Idk man, I would tend to disagree? Both B and C grif seem to have at least been chosen by someone who believed notes outside of the C major scale exist? But, y'know, different strokes and all.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Janko Keyboard Melodica Conversion
« Reply #30 on: May 14, 2020, 01:12:06 PM »

The piano keyboard at least has notes outside of C major.

A better argument in favour of CBA systems, especially the 5 row variety, is that you don't have to learn separately how to play in each key. I think that may be unique among musical instruments.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Janko Keyboard Melodica Conversion
« Reply #31 on: May 14, 2020, 02:10:29 PM »

A better argument in favour of CBA systems, especially the 5 row variety, is that you don't have to learn separately how to play in each key. I think that may be unique among musical instruments.

Well, I'm not so sure it's unique though *looks at thread topic, suspiciously*...

For clarity's sake, a 3 row Janko layout should provide the same thing, although the length of the scale is just longer to the C grif and B grif layouts. It simply fits the 12 nots of TET into 2x6 rather than 3x4. That feature makes it kind of viable to build it on top of a piano keyboard, which splits the scale into rows of 7+5.

I've started to find it fascinating that, AFAIK anyway, almost every chromatic instrument can just be transposed, an A or Bb clarinet, a B/C or C#/D melodeon, Guitar/Guitarlele, Violin/Viola etc, and there are typically practical reasons for doing so. And, all of those are fine and sensible. But, a transposed piano somehow seems like anathema.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Janko Keyboard Melodica Conversion
« Reply #32 on: May 14, 2020, 02:31:49 PM »

Electronic keyboards often have a transpose function.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Janko Keyboard Melodica Conversion
« Reply #33 on: May 14, 2020, 03:30:17 PM »

a 3 row Janko layout should provide the same thing, although the length of the scale is just longer to the C grif and B grif layouts.

Yes, that's it, in a nutshell.
You were right, I wasn't keeping an eye on the thread topic, for which I apologise... though in rather weak self-defence I'd say the Janko layout is not (yet, at least) as established a system as the CBA.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Corinto

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 233
  • Spain/Brasil/Belgium
Re: Janko Keyboard Melodica Conversion
« Reply #34 on: May 14, 2020, 03:56:50 PM »

Irving Berlin's transposing piano = https://www.youtube.com/watch?v=bO8VZoRw214
Logged
Carpe diem, C.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Janko Keyboard Melodica Conversion
« Reply #35 on: May 14, 2020, 04:31:33 PM »

...But, a transposed piano somehow seems like anathema.

It's useful for accompanying other transposing instruments (e.g. Bb clarinet, Eb saxophone, etc.). My wife sometimes uses the transpose function on her Yamaha keyboard if we want to play (for example) flute or oboe music together with me playing clarinet or saxophone.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: Janko Keyboard Melodica Conversion
« Reply #36 on: May 14, 2020, 11:21:54 PM »

 
Electronic keyboards often have a transpose function.
And for a mechanical, reed instrument, I understand that you can get Indian harmoniums where you physically shift the piano style keyboard to transpose the instrument.

Martin
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Janko Keyboard Melodica Conversion
« Reply #37 on: May 15, 2020, 01:48:18 AM »

Funny you mention that, Martin.  Last year I had a short obsession with that, until I researched and discovered the reviews are mostly poor, at least for portability.  Lots of levers/wires/moving parts.  Janko (and Hayden) (And the CBA) got the same with “software” vs. “hardware.”

David
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Janko Keyboard Melodica Conversion
« Reply #38 on: May 16, 2020, 09:28:44 AM »

Shifting keyboards are far from a new or rare idea. It was alive and well in the 17th century, maybe earlier. My harpsichord transposes by this method, as did some of the organs of Bach’s time.
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Huw Adamson

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Janko Keyboard Melodica Conversion
« Reply #39 on: June 03, 2020, 07:00:06 PM »

Only just coming across this now. I'm so glad my instructable was helpful! I should point out I'm not the first to do it though, there's an older YouTube video, albeit with fewer steps. I've had a cheap PA I've been meaning to do a more polished conversion on for a while now. My plan is to angle each key (love the use of buttons BTW) to get the effect of a height change, rather than build vertically.
Fabrication wise, it strikes me that a bloke with a 3D printer could mass produce some replacement melodica keys...
Logged
And the sharks they played melodeon
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal