Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Daft club IIB Victoria project  (Read 2020 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Daft club IIB Victoria project
« on: October 01, 2019, 09:48:30 AM »

I had this old box sitting there looking at me and I was musing that it would be nice if my GC box had a helper row.
Now this Victoria was Eb/Bb with reeds dropping out and I thought I wonder if I could?
So madness ensued. I worked out a plan for reuse and retuning of the reeds. I was short of a couple, but found them in the box of unknown unknowns.
It wasn't much harder than CF to DG.
All the treble end is done ready for fine tuning and I'm now thinking about the bass.
One reason for doing this (apart from giving me something to do while I am recovering from ricking my back) was to try and achieve a box that has the the same relative layout as my Pariselle DG.
I'm now looking at the bass end and unfortunately I've started thinking again. Can I go mad and change it to a 12 button? It's got all the usual linkages of a 70 year old club, but I have a spare small PA stradella bass.
The bass end is going to need a lot more work anyway. It might be more awkward than the treble.
I've only had a 12 bass for 6 months, I had 8 bass boxes for 40 years, but it's fun finding out what I can do with it and I'd like it on more than one box.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Daft club IIB Victoria project
« Reply #1 on: October 01, 2019, 10:46:38 AM »

You could go the whole way and build 14 bass to match the Pariselle.  Copy the Pariselle reed blocks and mechanism.  What could possibly go wrong?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Richard Shaul

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
Re: Daft club IIB Victoria project
« Reply #2 on: October 01, 2019, 10:55:31 AM »

Hi Pete, this is really interesting, as I have a Bb/Eb club Victoria and was thinking of doing something similar. Did you keep it as 4th button start? I was thinking that there would be less re-tuning to do if I moved it to 3rd button start. What did you do for the accidentals?

Any other tips?

Thanks
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #3 on: October 01, 2019, 11:13:32 AM »

Yes, 3rd button start and I used odd accidentals/reversals at both ends.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #4 on: October 01, 2019, 11:23:07 AM »

What could possibly go wrong?
I know you weren't totally serious about that Theo, but I did wonder........
If I fit 12 buttons, they fit nicely and symmetrically in the recess, but 14 would mean a completely new section.
« Last Edit: October 01, 2019, 11:36:03 AM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Daft club IIB Victoria project
« Reply #5 on: October 01, 2019, 02:08:47 PM »

You could go the whole way and build 14 bass to match the Pariselle.  Copy the Pariselle reed blocks and mechanism.  What could possibly go wrong?
   I don't seem to be able to locate the pariselle bass layout. I think it contained some extra chords.it is interesting how improvements are made to the standard box.
    I also learned a little from the topic on D7 chords. let me explain, if you play a C note and a D note together thy clash,are dissonant.( the melodeon is designed to prevent this by putting one note on the push and the adjacent note on the draw.) however if the notes are a octave apart they do harmonise,as in the D7 discussion.
  my suggestion for an extra left button would be a two note"chord" D and a C a octave apart.i think it might harmonise with D ,G,A, and C ,F, . am I barking up the wrong tree!! or what.
    it seems to me that this could also work on one rows where button numbers are limited.what do you think.
    brian. 
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Fred

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
  • G/C Pariselle, D/G Loffet & maybe too many Hohners
Re: Daft club IIB Victoria project
« Reply #6 on: October 01, 2019, 02:26:39 PM »

You could go the whole way and build 14 bass to match the Pariselle.  Copy the Pariselle reed blocks and mechanism.  What could possibly go wrong?
   I don't seem to be able to locate the pariselle bass layout. I think it contained some extra chords.it is interesting how improvements are made to the standard box.

Here you go for a G/C layout.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Daft club IIB Victoria project
« Reply #7 on: October 01, 2019, 04:28:49 PM »


[/quote]
If I fit 12 buttons, they fit nicely and symmetrically in the recess, but 14 would mean a completely new section.
[/quote]

Hi Pete,

Yes, It's a very do-able upgrade.

Most 2B Victorias have 4-note chords and linked bases, rather than the 3-note triad chords found in lots of Hohners....but that actually makes the process easier, if it's the case.

You need ....

1.    another bass-end action mechanism, which you will cut down and use half of...

2.    another bass block and chord block. These also can be cut down and half of each block grafted to the originals, to form the required 12 bass chord block and bass block.

3.    Remove and save the internal reedblock retainers....these will need to be re-sited to fit the longer blocks.

4.   Pillar drill or ream the additional holes in the soundboard and case, to accommodate the new blocks and action.

5.   Put it all together, then do the reedwork....bingo!

The sticky stages are.... grafting 2 reedblocks together, with precision and strength....and also reaming out the additional holes in wood that is fairly brittle, and loves to splinter!

I've some spare actions and bass blocks if you want to try....

Cheers

Mike R
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #8 on: October 01, 2019, 08:37:11 PM »


Hi Pete,

Yes, It's a very do-able upgrade.


Thanks Mike.

It was playing Squeezy's club VII that tempted me last weekend. Lovely job on that, by the way.

I've got an old club II but I think it's restorable and I shouldn't really break it.

Instead I'll have a go at making the blocks, they'll be straightforward enough. I've still got access to a decent workshop. I might take you up on the bit of mechanism though. I should have started all this a few weeks ago, I was in Cornwall a fortnight ago.

I was thinking of the thirds stop, but I'll double the 5ths instead like I did on a previous project. I don't want to get too far out of my comfort zone. A bit of plunder from the dead PA should provide the extra plates.

I presume the the air button has to be resited, or do the rods bend around that area?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Daft club IIB Victoria project
« Reply #9 on: October 01, 2019, 09:02:02 PM »

Hi Pete,

...yep, don't break anything up...send me a pm and I'm sure I'll have the parts!

Cheers

Mike
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #10 on: October 08, 2019, 09:01:05 PM »

The bass is all sorted now. 3rds are taken out and 5ths doubled in octaves so it's a very full sound. The reeds are right mish-mash of original zinc, aluminium, and salvaged PA, but they are at least all Hohners.
Only 8 bass for the moment, but 12 is the plan when I have a bit more time. I just wanted it up and running.
It's not tuned as wet as my pokerwork and certainly not as dry as the Pariselle but it's still a bit Hohnery.
The bellows need new gaskets and a bit of retaping but most of the tape looks like new. They are pretty sound though.
The pallets seal nicely at both ends so nothing to do there.
All in all it's worked out well. It sounds good and strong and it was an interesting exercise. I broke more reeds than I've ever done before and if I'd had more spare reed plates I would have used a CF as a start box. But hey-ho nobody died.
12 bass next but not just yet.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #11 on: November 05, 2019, 11:24:21 PM »

Mini update on this one.
The bellows look much better after re-taping the top and front (they were the back and bottom) and an air leak was traced and repaired with a patch cut from a pa bellows.
So now it's looking as well as sounding good.
I'm still planning the bass layout but I realise that it's a lot more straightforward than on a club 3 with the stradella pipes.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Daft club IIB Victoria project
« Reply #12 on: January 08, 2021, 08:44:41 PM »

Very late update on this.
I'm going to finish the bass end as planned. 12 bass as anything else is going to look wrong. I'll move the air button and make a new linkage. I would have liked to try a 18 bass set-up but it's not practical. The CF Victoria works well enough with 12 buttons, though it's on extended holiday with a much better player than me.
Having seen JNMSY's 3 row box based on a club 2b, I'll add the extra 3 buttons and make a full 3 row to make a proper G/C/Acc box. Everything else is stalled so this is something I can dive into.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Daft club IIB Victoria project
« Reply #13 on: January 08, 2021, 10:17:39 PM »

Look forward to seeing it.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Daft club IIB Victoria project
« Reply #14 on: January 09, 2021, 01:11:00 AM »

I'd have to say the Viktoria model is an excellent starting point.  They're nicely built, big box but lightweight with loads of spare room inside them.  I have a C/F that always sits beside the sofa so I can pick it up before I forget what I wanted to play... (it's an age thing).  I've never really thought to change the RH end, apart from declubbing the gleichton, all the accidentals and reversals just seem to be where you'd hope to find them.  It would benefit from 12 basses though.

Rob.

P.S.  This afternoon I found myself playing a somg I heard from Flatt and Scruggs, That was Before I Met You.  Weird!  Then my friend from Kentucky knocked at the door and I had to sing it to explain...
« Last Edit: January 09, 2021, 01:14:26 AM by Rob2Hook »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal