Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Strange repair  (Read 5179 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Strange repair
« on: October 30, 2019, 08:15:15 PM »

Investigating loose and rattling reeds blocks in the bass end of a Corona II, I was surprised to find the beech/hornbeam retaining blocks at either end of the reed blocks cracked and canted back away from the blocks allowing them to slide around. I removed the bass end cover and was more than a little purturbed to find two strips of black gaffa tape covering the areas where the blocks were fixed on the other side. Gaffa tape is a pig to remove at the best of times, this had been there for a while and was almost welded to the plywood "fondo". An hour or so passed, several words were spoken and the gaffa tape was picked off, fragment by tiny fragment, revealing a few small screws and two staples from a staple gun which had been used to try and fix the blocks in place. A triumph of ham fisted stupidity.
The damage to the fondo required a glued repair and I decide to drill through both blocks and bolt them through the fondo to make a strong and permanent repair. It's playing like a good 'un now, and with a brand new set of bellows it's very airtight. Pics will appear in this post and the next as they won't all attach in one post.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Strange repair
« Reply #1 on: October 30, 2019, 08:16:25 PM »

More pics
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Strange repair
« Reply #2 on: October 30, 2019, 09:35:21 PM »

Although gaffer tape got the Apollo program out of trouble on at least two occasions...and it’s great for busted wing mirrors... >:E

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Strange repair
« Reply #3 on: October 30, 2019, 09:56:37 PM »

All of that effort and so little to show for it!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Strange repair
« Reply #4 on: October 30, 2019, 10:52:10 PM »

It wasn't me, Mister!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Strange repair
« Reply #5 on: October 31, 2019, 12:24:31 AM »

It wasn't me, Mister!
[/qu >:Eote]

Guilty conscience?
Logged

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Strange repair
« Reply #6 on: October 31, 2019, 08:44:36 AM »

. A triumph of ham fisted stupidity.
The damage to the fondo required a glued repair and I decide to drill through both blocks and bolt them through the fondo to make a strong and permanent repair. It's playing like a good 'un now, and with a brand new set of bellows it's very airtight. Pics will appear in this post and the next as they won't all attach in one post.
   securing the blocks to the "fondo" with bolts or screws may make traditionalists  scream , but is no doubt effective.  could this be something for the twenty first century box thread??  I did wonder if strong little magnets would work, and still allow easy removal.
   brian..
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Strange repair
« Reply #7 on: October 31, 2019, 09:18:27 AM »

...I did wonder if strong little magnets would work, and still allow easy removal.
Almost certainly this would not work, even using strong Neodymium alloy magnets. Reed blocks need to be fixed as rigidly as possible to the fondo, in order that unwanted acoustic coupling* between the at-pitch and tremolo reeds does not occur, or at least is minimised as far as possible. The size and weights of the magnets required to achieve a suitably stable and rigid fixing would be totally impractical; even if you could redesign the instrument interior to accommodate the large magnets needed, it would end up being very heavy. There would also be potentially dangerous issues for a player who has a pacemaker - you don't want strong magnetic fields close to your chest :o.  Neither do you want the magnetic fields interfering with the steel reed tongues, perhaps even stopping them vibrating properly.

Other than glued-in reed blocks (which cause their own problems regarding tuning and maintenance) the best reed block fixing methods probably remain the traditional screw clamps at each end of the blocks, supplemented by one or more metal connecting straps over the top of the reed blocks.

* The effect of this unwanted acoustic coupling can be to either (a) pull the two reed pitches together so that they vibrate in unison, losing the tremolo all together, or (b) set up an unpleasantly strong 'wah-wah' tremolo at certain locations in the reed blcok. I'm not quite sure why this occurs; it may have something to do with the higher harmonics of the reeds being cancelled out, leaving the strong fundamentals in place to intefere with each other. This can be especially noticable when the desired tremolo is only slight (e.g. Castagnari 'light swing'). The 'wah-wah' effect can often be remedied by checking that all the reed block clamps and connecting straps are firmly (but not excessively!) screwed down. Also checking that wax and valves are all intact and working properly.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Strange repair
« Reply #8 on: October 31, 2019, 09:18:52 AM »

securing the blocks to the "fondo" with bolts or screws may make traditionalists  scream , but is no doubt effective.  could this be something for the twenty first century box thread??  I did wonder if strong little magnets would work, and still allow easy removal.
   brian..
Weltmeister uses same method to fix the reed blocks with bolt and nut. 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Strange repair
« Reply #9 on: October 31, 2019, 09:25:57 AM »

. A triumph of ham fisted stupidity.
The damage to the fondo required a glued repair and I decide to drill through both blocks and bolt them through the fondo to make a strong and permanent repair. It's playing like a good 'un now, and with a brand new set of bellows it's very airtight. Pics will appear in this post and the next as they won't all attach in one post.
   securing the blocks to the "fondo" with bolts or screws may make traditionalists  scream , but is no doubt effective.  could this be something for the twenty first century box thread??  I did wonder if strong little magnets would work, and still allow easy removal.
   brian..
I believe, backed up by the photos, that the 'blocks' Pete is referring to are not the reed blocks but the reed block mounting blocks. So the reed blocks fit as before under one clamping block and by a screw fixing on the other mounting block.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Strange repair
« Reply #10 on: October 31, 2019, 09:35:51 AM »

More pics

Looking good, Pete!
The only slight addition I might make to your solution would be to put washers underneath the bolt heads shown in photo Cor 4. This would spread the load on the relatively soft fondo plywood face and reduce the risk of the bolt heads squashing into the wood. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Strange repair
« Reply #11 on: October 31, 2019, 10:13:20 AM »

Nuts and bolts are a perfectly good fix I’m method, though I would tidy up the job by cutting off the surplus length.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Strange repair
« Reply #12 on: October 31, 2019, 10:15:16 AM »

I believe, backed up by the photos, that the 'blocks' Pete is referring to are not the reed blocks but the reed block mounting blocks. So the reed blocks fit as before under one clamping block and by a screw fixing on the other mounting block.

Yes, it was indeed the blocks holding the reed blocks in place that had broken away and have been repaired (I am honestly at a loss to understand what might have caused this to happen in the first place). The reed blocks themselves are of course still loose and simply trapped/clamped in place in the normal way.

Investigating loose and rattling reeds blocks in the bass end of a Corona II, I was surprised to find the beech/hornbeam retaining blocks at either end of the reed blocks cracked and canted back away from the blocks allowing them to slide around.

Looking good, Pete!
The only slight addition I might make to your solution would be to put washers underneath the bolt heads shown in photo Cor 4. This would spread the load on the relatively soft fondo plywood face and reduce the risk of the bolt heads squashing into the wood. 

Thanks Steve. Lacking any proper washers at the time and wanting to get on with the job, I used a stack of small to large washers to clamp the blocks in place for twenty four hours when gluing up. I then removed the stack and replaced it with a single small brass washer under the set-screw head for the time being. I'll be popping up to the model engineering supplies shop near Maidstone to buy a length of brass strip and make two plates that will run the length of the blocks underneath and support the 'fondo'. At this point I'll trim the set-screws to length. This is probably OTT, but it will satisfy my nerdy need to do a proper job.  ;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Strange repair
« Reply #13 on: October 31, 2019, 10:16:28 AM »

Nuts and bolts are a perfectly good fix I’m method, though I would tidy up the job by cutting off the surplus length.

At this point I'll trim the set-screws to length. This is probably OTT, but it will satisfy my nerdy need to do a proper job.  ;D

I see Theo beat me to it!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Strange repair
« Reply #14 on: October 31, 2019, 02:11:20 PM »

A triumph of ham fisted stupidity.

No doubt. However it is easy to forget in this internet age that not so very long ago there was very little information on how to repair melodeons, or where to find someone who knew how, let alone where to find spares.  Many players have had to make their own repairs despite little knowledge or aptitude, and just had to do their best with whatever seemed appropriate.

I must confess to having reinforced worn bellows with gaffer tape. It's still there, and still working, 30 years later.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Strange repair
« Reply #15 on: October 31, 2019, 02:34:37 PM »

when talking about Gaffer tape are you referring to this stuff https://en.wikipedia.org/wiki/Gaffer_tape
or duct tape?

gaffer tape is supposed to be easier to remove with little or no residue ( I haven't use it so I have no experience with it)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Strange repair
« Reply #16 on: October 31, 2019, 02:54:02 PM »

when talking about Gaffer tape are you referring to this stuff https://en.wikipedia.org/wiki/Gaffer_tape
or duct tape?

gaffer tape is supposed to be easier to remove with little or no residue ( I haven't use it so I have no experience with it)

Good point; I'd guess most people are more familiar with duct tape, which is indeed commonly referred to as "gaffer"; I've not seen much true gaffer tape outside the theatre world.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Strange repair
« Reply #17 on: October 31, 2019, 06:02:33 PM »

when talking about Gaffer tape are you referring to this stuff https://en.wikipedia.org/wiki/Gaffer_tape
or duct tape?

gaffer tape is supposed to be easier to remove with little or no residue ( I haven't use it so I have no experience with it)

Good point; I'd guess most people are more familiar with duct tape, which is indeed commonly referred to as "gaffer"; I've not seen much true gaffer tape outside the theatre world.
Ok , so duct tape then ( wonders why people started calling it gaffer tape ) , is that how its sold as gaffer tape in stores over there?

If so that would be a problem if you were looking for the real thing, which I bet Pete wishes it was used instead.

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Strange repair
« Reply #18 on: October 31, 2019, 07:30:20 PM »

ISTR Gaffer tape was so named for its use in the film & music industries, jury rigging short term structures lighting or sound structures which on being taken down were easier and safer with a tape that still had 'tack', Duct tape was developed for airtight joints on air and heating ducts where the more rapid solidification was a benefit as there were rarely dismantled.

Like most things, 2nd generation makers or resellers seem to name them interchangeably while the properties have been merged so that unless you buy from 3M or similar 'original' makers, neither might display the properties expected !

Having said that there seems to have recently been a slight change in Masking tapes regarding the tackiness and bleed resistance available, customer feedback or more likely marketing opportunity ??
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Strange repair
« Reply #19 on: November 01, 2019, 05:46:10 AM »

Whoa...I’m learning a whole lot of stuff about gaffer versus duct tape.  Never again will I confuse the two.
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal