Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Broken stradella pin  (Read 1659 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Broken stradella pin
« on: November 15, 2019, 07:47:58 PM »

My friend has a PA that has an annoying bass button.
I said I'd help and have dismantled the bass end to have a look. Lots of photos and dismantled bits marked as I'm not quite daft.
Anyway there is a broken pin in the stradella mechanism. How fixable is this? Would it have been soldered or welded? Would epoxy be a sensible fix?
There is a second pin next to it, could this provide some extra support? Should I still through and make a new pin?
This is all just out of my comfort zone, but I want to return a working instrument.
The pin is next to the one with the brown marker.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken stradella pin
« Reply #1 on: November 15, 2019, 07:52:07 PM »

They are usually welded on.  I doubt that soft solder would hold for long, or epoxy.   Hard solder would be ok.  I once repaired one of these by drilling through the rod and using epoxy to fit a new lever.  Roger T is the expert on stradella basses in these parts.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Broken stradella pin
« Reply #2 on: November 15, 2019, 08:07:18 PM »

Thanks Theo.
I might have to dig it right out for welding. I am a bit fearful of straightening some of the old pins, but I'll have to bite the bullet.

Roger T is the expert on stradella basses in these parts.
I'm certainly not, and I don't think I want to be.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Broken stradella pin
« Reply #3 on: November 15, 2019, 11:53:06 PM »

I’ve not repaired a broken pin, so Theo is ahead of the game. Is the bass machine the sort that comes apart or a cassette that comes out in a block? Drilling and replacing as per Theo is the way to go unless the whole pipe+collectors can be replaced (I’d try solder ... I don’t know how they are made but they look like they are spot welded on, if that’s possible). Carini do sell parts for bass machines. Or you might get a suitable part from a donor instrument. What make is the accordion?
Here is an example of spares...I haven’t specifically worked out how you orders these items, but Luca at Carini is very helpful..
http://www.carinidena.it/MS5ECOMMERCE60/jsp/eco_cc_home_bs_portlet.jsp?p=dettarti&codarti=46960001
« Last Edit: November 16, 2019, 01:53:02 AM by RogerT »
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Broken stradella pin
« Reply #4 on: November 16, 2019, 09:25:50 AM »

Thanks Roger. The whole bass machine clips out and I've been able to move the button wires out of the way but left in the relevant holes.
I've phoned a friend who does fine sculpture and he is going to hard solder it back together as Theo suggest. He might have a go at welding, but silver solder or brazing should be ok if it's a big enough blob. I'll file it to clear any other parts
It's only a Parrot but it's pretty good otherwise apart from the leatherwork. It's getting her back into playing after a long layoff, and after all the encouragement I've had for the same thing, I want to do my best for her.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Broken stradella pin
« Reply #5 on: November 16, 2019, 10:08:29 AM »

It's only a Parrot but it's pretty good otherwise apart from the leatherwork. It's getting her back into playing after a long layoff, and after all the encouragement I've had for the same thing, I want to do my best for her.

I had a Parrot copy of a Scandalli Polyfonico years ago, before my road to Damascus moment and my swap to push-pull, and it was a good playable box with a nice tone and a smooth action. I think it's still kicking around the morris world somewhere after I sold it to a fellow morris musician around 1980......

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken stradella pin
« Reply #6 on: November 20, 2019, 12:58:57 PM »

I’ve just scrapped a Stradella bass.  If you want any parts let me know
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Broken stradella pin
« Reply #7 on: November 20, 2019, 10:55:34 PM »

Thanks Theo.
Actually got it fixed yesterday. A sculptor friend welded it and it only took all afternoon to reassemble it all.
Only got two buttons wrong too.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Broken stradella pin
« Reply #8 on: November 27, 2019, 06:35:39 AM »

I have fixed these before. I used silver bearing solder and wrapped a very thin piece of brass around the axel and had it capture the broken pin.
I used a needle nose to form it around the pin. I clamped it with hemostats and used a touch of zinc chloride flux the get the solder to really stick.
 This only works well if the axles are from a model that has a bit of space between them.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal