Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bellows Size matters?  (Read 4884 times)

0 Members and 1 Guest are viewing this topic.

Mark Leue

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 175
Bellows Size matters?
« on: November 26, 2019, 12:22:37 PM »

What (if any) are the downsides to the smaller models of accordions, like the Castagnari Clovis, Baffetti's Art 85, and other smaller 2 row boxes with smaller bellows and key layouts?
I'm drawn to the ones bigger than a Lilly but smaller than a Pokerwork. All other things being equal they may sound a bit brighter, but what about the effect of a smaller bellows size?  Doug, the owner of The Button Box, seems to feel that smaller bellows are, in the end, a disadvantage, but I couldn't quite follow his thinking. Do bigger bellows give you more reserve air to work with? Do smaller bellows make for a quicker response all other things being equal?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Size matters?
« Reply #1 on: November 26, 2019, 12:31:52 PM »

My view is that smaller bellows do give a quicker response and possibly greater volume when played. It is far easier to get high pressure in a small volume of air and also to reverse the pressure. As an example of the effect if you look at tyre (tire) pumps, bicycle pumps small volume and can pump up to 150psi, car pumps larger volume top out at ~50psi.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Size matters?
« Reply #2 on: November 26, 2019, 12:44:27 PM »

Yes, smaller boxes often louder,  because of additional pressure, but often compromised bass sounds because either the bass reeds are fewer and smaller than usual (eg on Lilly and Tommy) and just because of the smaller space bass reeds don’t seem to be able to give of their best.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Bellows Size matters?
« Reply #3 on: November 26, 2019, 01:34:17 PM »

For me, I would liken the situation to a car's accelerator pedal. Smaller instruments have a smaller throw between 'none' and 'maximum' pressure being applied. This makes it much easier to play explosively/loudly etc - it's just easier to put your foot down.

The downside of this is that, they're harder to control in a smooth manner, and, it's easier to find the compromises in the reed set. Reeds that are set so you can play very loudly usually do not respond well when played gently. Reeds that are set to respond quickly likewise often will fail to sound/choke when heavier pressure is applied. Combine this with the difficulty of smooth control, finding just the right amount of bellows to keep the reeds responding, but, not applying too little/too much pressure can be quite a task.

So, effectively, you can find yourself in the situation of feeling like the instrument is out of control. Therefore, larger instruments tend to have the benefit of feeling smoother to play, and letting the musician feel much more in control. They allow you more nuance, instead of only breathing fire and gargling spanners.

The best example of this, for me, is visit your local purveyor of reeded instruments and try one of those tiny organettos, or a Giordy. I find it very hard to accurately control my volume/dynamics with these. Likewise, when I play a larger instrument, I usually find them kind of dull and unexciting, not necessarily because the instrument can't do what I'm looking for, but, because I can't do what I'm looking for with that instrument, because of my body size/arm strength/existing expectations etc.

Additionally, the smaller the instrument, the more likely you will also run into the situations where a long series of fixed direction playing will run you up against your maximum bellows displacement/your arm length. So, yes, there are air capacity concerns.

Another more visible disadvantage is you tend to have to shed 'features' in order to achieve these smaller sizes. The additional size afforded allows more mechanisms to be installed such as couplers, instead of stop rods. All these extra bits of tech take up some space inside and if there isn't space for them, they can't really be fitted.

nb - this has been my experience, anyway.
« Last Edit: November 26, 2019, 01:54:43 PM by Gena Crisman »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bellows Size matters?
« Reply #4 on: November 26, 2019, 01:48:03 PM »

I don’t know about bellows size, but the higher quality reeds tend to be louder, or as in the case of my Giordy, too flippin' loud.  (:)

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: Bellows Size matters?
« Reply #5 on: November 26, 2019, 02:05:04 PM »


This thread from a couple of years ago might throw some light on the question. Or it might just muddy the waters a bit more.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Bellows Size matters?
« Reply #6 on: November 26, 2019, 03:41:04 PM »

I started on a Tommy and now use a full sized box as my go-to melodeon. I still have the Tommy and use mainly for after Morris pub sessions.
If I've not played it in a while it always strikes me as being responsive and quite dynamic for the reasons Theo and Lester give.
Perhaps because I've learnt to play on it, I've never experienced the loss of control that Gena describes. In some ways the opposite is true for me. It's small size means I can dominate it easier and be lighter in my approach, so can vary the volume easily with it, and it taught me air control using smaller bellows.

When first starting, Theo and others described smaller boxes as not having a 'full' sound which I didn't understand. That was demonstrated to me when a friend played my Tommy then her Castagnari Dony one after the other.
They don't have the fuller rich sounds of a larger box, but in my opinion still have a lot going for them in a very compact body, which us why I keep my Tommy.
Cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Bellows Size matters?
« Reply #7 on: November 26, 2019, 04:27:28 PM »

Perhaps because I've learnt to play on it, I've never experienced the loss of control that Gena describes. In some ways the opposite is true for me. It's small size means I can dominate it easier and be lighter in my approach, so can vary the volume easily with it, and it taught me air control using smaller bellows.

Right, I agree wholeheartedly to be honest. I think perhaps what I'm getting at would be better described as; as bellows size decreases, finer control yields larger and larger results, which is great when you want large results, and this is the positive benefit that most people describe enjoying. However, the finer touches (eg very fine note shaping) which you could potentially be achieving with a larger instrument begin to require greater and greater precision, and will begin to creep out of reach. Does that seem like it makes any sense?

For me, and I imagine most, there is probably an 'ideal' size, where I get the response I want, and the feeling of domination you describe, without also experiencing the feeling of clumsiness I get with the teensiest instruments (which seems to fall in line at least a little with what RogerT describes).
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Bellows Size matters?
« Reply #8 on: November 26, 2019, 04:41:38 PM »

Um... I think I get that Gena!
As for the 'teeniest' instruments, I'm not the one to comment.
I tried someone's Giordy once and felt it was so small I couldn't really hold it let alone play it!
I found that really strange as I have very small hands. It was a quick passing 'Sidmouth squeeze' as we were heading in opposite directions, so perhaps a less manic go might give me a better opinion. I quite like Lilly's and they are smaller than my Tommy.
They do scream though  ;)
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Bellows Size matters?
« Reply #9 on: November 26, 2019, 06:26:11 PM »

Some might go for “bigger is better” ;)
https://www.ebay.com/itm/Hohner-Button-Accordion-ADG-Custom-Modified-3-Row/293340610098?hash=item444c767e32:g:~J4AAOSw93xdmPfO

Weird looking thing! In this case yes it matters.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bellows Size matters?
« Reply #10 on: November 26, 2019, 06:33:43 PM »

I had a Castagnari Mignon the one row version of the Giordy, many years ago when my kids were small. Thought it would be good for them to play on, but it was so unforgiving its loud tones for any button press that it quite put them off as it just highlighted their mistakes.
Mind you neither took to the instrument or playing at all :(
« Last Edit: November 26, 2019, 06:35:26 PM by Lester »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Size matters?
« Reply #11 on: November 26, 2019, 07:42:40 PM »

I don’t know about bellows size, but the higher quality reeds tend to be louder, or as in the case of my Giordy, too flippin' loud.  (:)

Though in the case of the Giordy it's the bellows pressure that makes them loud.   The reeds in the ones I've seen have been standard machine made grade.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Bellows Size matters?
« Reply #12 on: November 26, 2019, 07:53:03 PM »

I agree that small bellows are easier to produce higher pressure ( and ?pullsure) than larger bellows   and that  larger bellows  need less movement  for a given volume of air .  However  notwithstanding  this  either  can do what  t'other   can  if the player develops good bellows (volume)  control rather than using them just as an air pump.  The bellows are the very soul of all the ''accordion'' family and require as much or eve more skill than does pressing the on/off buttons to produce the right notes in the right order.

george

Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bellows Size matters?
« Reply #13 on: November 26, 2019, 09:26:04 PM »

I know it's easier to run out of air on a Liliput with perfect bellows than a leaky old pokerwork.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Bellows Size matters?
« Reply #14 on: November 27, 2019, 08:09:24 AM »

I don’t know about bellows size, but the higher quality reeds tend to be louder, or as in the case of my Giordy, too flippin' loud.  (:)

Though in the case of the Giordy it's the bellows pressure that makes them loud.   The reeds in the ones I've seen have been standard machine made grade.
Theo, can you explain the physics  >:E of why small bellows give a higher pressure than big bellows?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Size matters?
« Reply #15 on: November 27, 2019, 08:47:37 AM »

It’s it’s just arithmetic.

Take the cross section of two bellows one twice as big as the other, say two units of area and one unit of area each.

Push on the end with one unit of force.  The force is spread over twice the area in the large bellows compared with the smaller, so the pressure in the larger one is half as much as the smaller.

Pressure = Force/Area

So:
larger bellows Pressure =1/2 = 0.5

Small bellows Pressure = 1/1 = 1
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Bellows Size matters?
« Reply #16 on: November 27, 2019, 09:28:26 AM »

I'm uneasy with this talk of pressure, especially high pressure. I'm much happier thinking in terms of playing louder or quieter, because for me at least louder never really feels like subjecting the box to 'high pressure'. I'm sure that as soon as you start to think in terms of high or 'maximum' pressure you are likely to be being unkind to your reeds.
Logged
Old Paolo Sopranis in C#/D and D/D#

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Bellows Size matters?
« Reply #17 on: November 27, 2019, 11:03:41 AM »

the whole point about bellows 'pressure'  and at risk of stating the obvious is that by applying more or less of it  the reeds will sound louder or quieter.  Therefore instead of cogitating over the benefits or snags or larger or smaller bellows  experiment with a particular box (as all are a bit different)  to  establish the amount of pressure required to play at that boxes mid volume.   Play tunes  mostly at around mid volume and full benefit can be taken of the superb dynamic qualities  i.e. you can play louder or quieter to add to the musicality of whatever tune is being played.  This applies if playing amplified indoors or if playing outdoors for morris etc and   irrespective of bellow size or number of reeds (voices) in a particular box

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Bellows Size matters?
« Reply #18 on: November 27, 2019, 01:55:58 PM »

Theo's maths confirm what we know regarding bellows size.
I do wonder if volume is also affected by the size of body of the case.

I was wowed in the summer by the sound coming from the bass end of a Mory being played next to me. It was warm, rich and simply gorgeous.
Looking across the Castagnari range, it is slightly larger than the likes of the Hascy, Jilly etc. Most are in the range of 18 x 28cm and the Mory 20 x 30cm.

 Talking this through with a fellow melnetter, we agreed that the warm sound could be - probably was - due to the increased size of the casework absorbing some of the high end frequencies.
Therefore, I wonder if the reverse is true - a smaller body might not absorb as many higher frequencies and so they 'appear' to be louder as the sound is more piercing to our ears?
Just thinking aloud......
Cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Bellows Size matters?
« Reply #19 on: November 27, 2019, 05:56:43 PM »

Theo's maths confirm what we know regarding bellows size.
I do wonder if volume is also affected by the size of body of the case.

I was wowed in the summer by the sound coming from the bass end of a Mory being played next to me. It was warm, rich and simply gorgeous.
Looking across the Castagnari range, it is slightly larger than the likes of the Hascy, Jilly etc. Most are in the range of 18 x 28cm and the Mory 20 x 30cm.

 Talking this through with a fellow melnetter, we agreed that the warm sound could be - probably was - due to the increased size of the casework absorbing some of the high end frequencies.
Therefore, I wonder if the reverse is true - a smaller body might not absorb as many higher frequencies and so they 'appear' to be louder as the sound is more piercing to our ears?
Just thinking aloud......
Cheers
Q

Several possible reasons for "bigger box = richer bass sound"...

Sometimes smaller bass reeds are used in smaller boxes to fit them in, and bigger reeds in "full-size" boxes.

Sometimes the reed blocks are bigger with larger cavities above the reeds.

Sometimes bass end stops reduce the higher-frequency partials because the holes are smaller.

Sometimes the acoustic lowpass filter formed by the air holes in the end together with the air volume inside the end has a lower cutoff which reduces high frequencies.

I've seen all of these causes across my box library. If a box like the Mory has all the above, it will sound a lot richer than a small box which doesn't.

What it isn't is the *material* of the casework (e.g. wood type) absorbing higher frequencies, this has been shown experimentally to make no significant difference.

(cue all the "oh yes it does" arguments that reoccur every year or so when the "does the wood make a difference" question comes up yet again...)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal