Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Making Bellows Frames  (Read 2387 times)

0 Members and 1 Guest are viewing this topic.

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Making Bellows Frames
« on: December 12, 2019, 03:34:37 PM »

I decided to make my own bellows frames to attach new Harmonikas bellows to my Pokerwork. It wasn't too difficult, but a good degee of accuracy was needed. In addition to the usual workshop tools I used a thicknesser machine, a 12" disc sander and Japanese saws.

Step one - old shelving made from Cherry wood, donated by a friend.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #1 on: December 12, 2019, 03:36:51 PM »

Step two - use bandsaw and thicknesser to cut wood to size - two section sizes and two lengths, 8 pieces in all each end.
« Last Edit: December 12, 2019, 03:53:29 PM by Tiposx »
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #2 on: December 12, 2019, 03:38:08 PM »

Step 3 make L section girders to Hohner measurements.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #3 on: December 12, 2019, 03:40:26 PM »

Step 4 - mitre the joints, assemble and glue the frames up.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #4 on: December 12, 2019, 03:42:09 PM »

Step 5: slit the mitre joints and insert strengthening web. (sorry this one is out of focus)
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #5 on: December 12, 2019, 03:45:11 PM »

Step 6: Shape the corners and the horizontal pieces. I used a sharpie for the black edge, then a single coat of gunstock oil to seal the dye.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #6 on: December 12, 2019, 03:47:15 PM »

Step 7:
Assemble to the bellows, glue with pva, clamp up tight between thick flat boards and keep fingers off for a while.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #7 on: December 12, 2019, 03:48:15 PM »

Step 8:
Nice!
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #8 on: December 12, 2019, 03:51:01 PM »

Step 9:
Drill the pin holes and fit new gaskets. It feels and plays really well, no leaks or creaks, no stiffness.
Job Done


Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Making Bellows Frames
« Reply #9 on: December 12, 2019, 05:17:58 PM »

Bravo, well done !  Do you need a jig to ensure the frames are square when gluing up or the miters take care of that automatically ?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Making Bellows Frames
« Reply #10 on: December 12, 2019, 05:21:52 PM »

Proper job! Very well done!  :|glug
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #11 on: December 12, 2019, 05:27:40 PM »

Hi Tirpous
Most of the work was in making jigs for the disc sanding table to ensure accurate mitres, and testing them with scrap pieces to achieve true right angles with no gaps. So when I was ready to glue up it was just a case of holding the frames against a true right angled former.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Making Bellows Frames
« Reply #12 on: December 12, 2019, 07:07:52 PM »

Very good! On the Pariselle course in Yeovil they are made from 4 pieces, mitred and glued and then machined down to get the stepped effect. But he might use a different method now.

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #13 on: December 12, 2019, 07:12:12 PM »

I am sure that would work. I looked at the Hohner originals and thought that the upright part was made from a different piece of wood to the horizontal piece, so that's what I went with. I should think that gluing two strips together would be easier for most builders, and probably stronger.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Making Bellows Frames
« Reply #14 on: December 12, 2019, 07:32:18 PM »

Quote
Hi Tirpous
Most of the work was in making jigs for the disc sanding table to ensure accurate mitres, and testing them with scrap pieces to achieve true right angles with no gaps. So when I was ready to glue up it was just a case of holding the frames against a true right angled former.

OK, thanks !
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Making Bellows Frames
« Reply #15 on: December 13, 2019, 07:22:34 AM »

The bellows look fab and your skill and accuracy in making the frames is impressive, good job all around, well done!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #16 on: December 13, 2019, 10:14:57 AM »

Thank you - made my day!
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Making Bellows Frames
« Reply #17 on: December 13, 2019, 10:56:04 AM »

First class work, very impressive.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Making Bellows Frames
« Reply #18 on: December 13, 2019, 05:39:16 PM »

Excellent craftsmanship. For added strength and longevity you might consider glueing in triangular corner pieces.
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Making Bellows Frames
« Reply #19 on: December 13, 2019, 06:46:19 PM »

I agree that is an option.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal