Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Folk III by Luukinen  (Read 4246 times)

0 Members and 1 Guest are viewing this topic.

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Folk III by Luukinen
« on: September 22, 2009, 07:52:24 AM »

The new model: Folk III

- treble: 21 keys, 3 voice, 1 stop
- bass: 8 keys 4 voice
- Size 310x175

Model is avaible also 23 treble buttons and 12 bass buttons. Bass stop to remove thirds.

http://www.f-aw.net/images/folkiso.jpg
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Folk III by Luukinen
« Reply #1 on: September 22, 2009, 01:16:34 PM »

From a little hunting around, about 8.8 pounds? Seems VERY nice. any sound clip?
Logged

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Re: Folk III by Luukinen
« Reply #2 on: September 22, 2009, 02:47:53 PM »

From a little hunting around, about 8.8 pounds? Seems VERY nice. any sound clip?
If you mean the weight. Yes about that. I dont have sound clips, yet.
Thanks the comments and I would like to read the comments of other members of the melodeon.net.
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Folk III by Luukinen
« Reply #3 on: September 22, 2009, 04:20:40 PM »

Very  very nice

I would suggest the following:

1. The plate that covers the buttons is too shiny, make it dull
2. Round the corners of the button plate rather than square....clumsy looking
3. The red grille cloth is unattractive
4. The badge on the treble face of the chassis is unattractive and a deterrent to purchase, too large and a  bad shape.. incongruous with the rest of the design of the box
5. The edges of the accordion chassis are too square as is the fingerboard... "break the edge"   or slightly chamfer or round the edge.. just slightly

Otherwise I like it very much.  In particular the inlay bands ( marquetry) and the metal grille work on both sides...and the general wood work

Nice job. !

Logged

ladydetemps

  • Emote Wizard
  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 3768
  • Castagnari Tommy D/G, Hohner 1 row 4 stop in C
    • My Youtube Channel
Re: Folk III by Luukinen
« Reply #4 on: September 22, 2009, 04:28:09 PM »

ooooh, pretty. (:)

3. The red grille cloth is unattractive
I thought it was attractive...but then red is my favorite colour. ;)
« Last Edit: September 22, 2009, 04:33:07 PM by ladydetemps »
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Folk III by Luukinen
« Reply #5 on: September 22, 2009, 05:16:41 PM »

1. The plate that covers the buttons is too shiny, make it dull
Or use a wood plate instead? Then the square corners wouldn't show so much.

I kind of like the red cloth under the grille! But I agree about the name plate, the parallellogram shape looks odd and it's way too thick IMHO. Perhaps paint the logo in the center of the chassis, or use a decal?

I know how much work is involved in building a melodeon, these are details but they would significantly enhance the overall looks of the instrument. Of course, playability and sound are more important than the looks, so I look forward to hear sound clips as well!

Congratulations.

« Last Edit: September 22, 2009, 05:21:27 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Re: Folk III by Luukinen
« Reply #6 on: September 22, 2009, 07:31:28 PM »


There is short video clip. video quality is not good.
http://www.youtube.com/watch?v=-kgv_z0xTqA
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Folk III by Luukinen
« Reply #7 on: September 22, 2009, 09:53:23 PM »

Video quality not so good, but the instrument sounds powerful. What is the estimated cost right now? Or you may PM me if this is a problem to discuss openly at this time.

Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Folk III by Luukinen
« Reply #8 on: September 22, 2009, 10:53:08 PM »

Thanks for this preview Aaro. big project, and you must be pleased to see it bear fruit.

I have to say I had the same reaction to the shiny metal button plate as the prior poster. Personally I like wood - but others surely will love the bright metal and take pleasure in the 'fusion'. Very Finnish, and reminds me of my experience of log cabins, reindeer, and top quality mobile phones and other electronics in Ruka this summer. The rest is just fine. But perhaps you could push those pins in a little further?  My Gaillard ones have caught on clothing and fallen out!

Thanks for your Kaustinen tip - it was a lovely festival .... I've been invited back to Ruka in February. But I hate skiing.  So I'll just have to sit by the sauna :|bl drink Karhu :|glug and play accordion :||:
« Last Edit: September 23, 2009, 08:25:44 AM by chrisryall »
Logged
  _       _    _      _ 

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Folk III by Luukinen
« Reply #9 on: September 23, 2009, 04:31:38 AM »

I agree with the use of wood for the button board face plate   
but if you are going to use metal, round the corners and dull the finish   
Logged

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Re: Folk III by Luukinen
« Reply #10 on: September 23, 2009, 07:31:25 AM »

Thank you very much for all comments.

Usually I use wood button plates and grill and this model is also available wood grill etc.
All metal parts are made of stainless sheet metal, grill and treble/bass button plate. That why they are very shiny and works better if box is coated on celluloid or bright lacquer.

Yes this is mostly Finnish modell, but it is modifiable.

To Chrisryall
Mayby we see next summer in Kaustinen or somewhere else.

Aaro
« Last Edit: September 23, 2009, 08:05:51 AM by Aaro »
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: Folk III by Luukinen
« Reply #11 on: September 23, 2009, 12:04:14 PM »

I really like it as it is, but must agree that the name badge is a trifle large and does detract from the over-all look. Sounds lovely.
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Folk III by Luukinen
« Reply #12 on: September 23, 2009, 05:20:20 PM »


I like the metal button plate, it reminds me of my favourite Hohners from the early '30s:


But I don't like that chunky parallelogram name badge either.

Looking at the slots beside the bass buttons, I wonder if it has helikon basses?
 

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Re: Folk III by Luukinen
« Reply #13 on: September 24, 2009, 08:06:00 AM »

Thanks all the comments.

Name plate is old design. Today's I use transfer an image or enter the name of the grill or Gastagnari style nameplate.
No I am not use heligon bass in this box.

To Chrisryall
Mayby we see in February, if I am same time in Salla, there is my childhood home. That is near to Ruka.
« Last Edit: September 24, 2009, 08:34:16 AM by Aaro »
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal