Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Wilkinson of Glasgow: Excelsior Accordeon Project  (Read 6579 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Wilkinson of Glasgow: Excelsior Accordeon Project
« on: January 30, 2020, 12:54:12 AM »

Another new arrival....an early 19key  Excelsior Accordion with the A H Wilkinson of Glasgow  Trademark, Stradella corners, side hook closures and Diatonic basses. Not sure if this one is meant to be a C/C# or a B/C.

I thought these boxes were Hohner manufactured, but the keyboard and action look pure Dienst International to me even down to the 19.4mm spacing of the keys and the wee nebs between the two screws on the triangular section pallet arms. Tellingly, the bass chords have 6 reeds (3 x 2) on a common reed plate- as do the International "Wyper" models.

There is what appears to be a pencilled date inside the treble end of the bellows frame 14.6.26 alongside  a signature

So far I have just re-attached the air spoon and done  a preliminary Tuning Check - A=435 if it is a C/C# or A=452 if it is a B/C.
« Last Edit: January 09, 2021, 02:08:13 AM by Peadar »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: (Wilkinson) Excelsior Accordeon
« Reply #1 on: January 30, 2020, 08:03:17 AM »

You'll need a bigger house soon, Peader. Be warned! (That's a nice looking thing, mind.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: (Wilkinson) Excelsior Accordeon
« Reply #2 on: January 30, 2020, 01:29:20 PM »

Looks like a beauty Peadar, congratulations!

Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: (Wilkinson) Excelsior Accordeon
« Reply #3 on: January 30, 2020, 02:44:20 PM »

Looks like a beauty Peadar, congratulations!
It is and thank you. Not quite the William Hannah model- but I have already worked out that diatonic basses fulfil my ambitions as a player- and from Theo's comments on the air consumption of basses on (Luke Daniels') Hannah model, this is probably just as well.
Apart from needing to properly re-spring the air button and retape the bellows (another new experience for me) the only problem is a couple of choked reeds. Some of these cleared after a bit of playing....and I subsequently found some bits of dessicated bluebottle (British breed of housefly) on the table.

There is visible patination and polish pattern on the keyboard cover plate and buttons - It has been played on both rows mostly on buttons 3-6 with occasional excursions to 2 and 7. 7 inner seems to have had more use than 7 outer. I doubt this is a-typical.
« Last Edit: January 30, 2020, 06:45:41 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: (Wilkinson) Excelsior Accordeon
« Reply #4 on: February 18, 2020, 09:44:45 PM »

The straps which appeared to be unfinished leather actually turn out to have the remains here and there of black polished surface....anyone know the basic procedures for finishing leather? Thhe original surface finish is completely gone from 99% of the strap
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: (Wilkinson) Excelsior Accordeon
« Reply #5 on: February 22, 2020, 11:39:46 PM »

Dusted off the bellows papers this evening. Used a painters lining brush to clean the dust from  the folds of the bellows. Photo below.

It took me till November but the damaged bellows tapes have now been replaced.
« Last Edit: January 09, 2021, 02:05:53 AM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #6 on: January 09, 2021, 08:32:19 AM »

Restoration Project now moving on to replacing the pallet facings.

The outer / upper 10 pallet row had been over faced with what appears to have been white moleskin cloth. The facings came off with the assistance a fine spray.

So far so good.

With the pallets off, the fondo looks pretty rough.

Does it need some sort of clean-up / re-finishig to make sure the pallets don't leak in future?

Photo of soundboard now attached

Suggestions on methods of re-finishing the pallet area of the soundboard anyone? Obviously I don't want to damage the (Wilkinsons & Made in Wurtemburg) branding stamped on the sound board in now faded gold print.
« Last Edit: January 09, 2021, 08:38:10 AM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #7 on: January 09, 2021, 12:21:28 PM »

The photo is not very clear, but I can't see any major defects.  If you post a photo with the whole keyboard removed it will be easier to advise.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #8 on: January 09, 2021, 12:56:36 PM »

Thanks Theo. Three Photo's attached - It looks worse in side light - the freshly shiny but orange peely strip above the top pallet row is the result of trying a brushing with meths- which clearly hasn't improved matters. the board may be functionally air tight with the new pallet facings.

I am using one of Charlie Marshall's thicker leathers - approx 1.6mm thick though it squeezes down in the Vernier jaws to approx 1.06mm. The original leathers had hardened at a thickness of 1.4mm.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #9 on: January 09, 2021, 02:12:38 PM »

I see nothing on that fondo that would prevent the pallets from sealing.  Getting them attached to the arms and remaining sealed is harder because tightening the screws can cause minute tilting of the pallets which can be enough to cause air leaks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #10 on: January 09, 2021, 02:56:59 PM »

Thanks Theo.
I'll put it back together and see what happens!
I am hoping that the fairly thick leather (thickness close to the original) facing will have sufficient give to get contact everywhere.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #11 on: January 09, 2021, 03:39:38 PM »

If you do get leaks you can test whether the screws are tilting a pallet by slackening them off by a half turn or two.  Sometimes when you tighten the screws you can see the pallet move which can assist in knowing how to bend or twist the lever.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #12 on: January 09, 2021, 06:23:52 PM »

If you do get leaks you can test whether the screws are tilting a pallet by slackening them off by a half turn or two.  Sometimes when you tighten the screws you can see the pallet move which can assist in knowing how to bend or twist the lever.
Thanks Theo- I eventually did this with 2 pallets. The melody end seems OK now - Spoon pads next on the list for renewal- but not today and after that revalving.

Peadar
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: (Wilkinson) Excelsior Accordeon
« Reply #13 on: January 10, 2021, 07:09:56 AM »

The straps which appeared to be unfinished leather actually turn out to have the remains here and there of black polished surface....anyone know the basic procedures for finishing leather? Thhe original surface finish is completely gone from 99% of the strap
. 

It might be possible to revive them with a leather dressing. Neatsfoot oil or British Museum leather dressing, but replacing them is probably the way to go.

Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #14 on: January 11, 2021, 08:12:53 PM »

Straps- I should have said strap. Specifically the shoulder strap- which appears to be original.

 I was wondering if a black acrylic "leather paint"  might be a suitable way of refacing the shoulder strap

It is split leather and the original tanning process created a strap which is still supple and shows no sign of stretch damage or wear - just complete loss of the "surfacing" apart from a few specks of black (See photographs)


The strap fixing -a single stirrup bracket on the top and a screw through a washer on the bottom- leaving the strap adjustable but captive, appears to have been standard on 1920's Wilkinson Excelsiors- I have an unrestored example of the 24 bass version - which has had bracket removed but still retains the screw and washer on the underside.


The other straps - Thumb strap is clearly not original and the bass strap was completely shot-  I have already replaced it with one stripped off a Hohner Student I PA.
« Last Edit: January 12, 2021, 08:31:20 PM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #15 on: January 13, 2021, 08:03:07 AM »

You could apply an acrylic finish to the leather, but I don’t believe it would recreate anything like the original finish.  I always do a simple test before retaining old leather straps.  Try to tear across the strap using as much strength as you can but only using hands, no tools.  Sometimes the leather can look fine, but will tear as easily as cardboard.  If it’s so weak it should not be used on a playing instrument.
Even if it’s not weakened if it looks bad then a nice new strap of veg tan leather dyed to your preferred colour will look and feel good.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mark Anderson

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #16 on: January 14, 2021, 10:58:14 PM »

Just beware that many products which sorb into, stain, or condition leather effectively are also fairly likely to end up staining your clothes or skin after a nice, long playing session with the strap rubbing tightly against your shoulder or arm. 
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #17 on: January 16, 2021, 12:32:38 AM »

The strap was originally painted (tawed?) rather than dyed....but in the end I dyed the outside with black "Kiwi" "Shine and Protect", and gave it a rub over with leather cream to improve the sheen. Each time I worked from one end of the strap to the other. applying the liquid and thumbing it in.  To my surprise the suede like surface of the leather laid down smooth (there is a bit of wax in the product). After the surface was touch dry I went over it with a wipe/rub in of leather cream, left it for a couple of hours and then gave two more coats of the shine and protect then left it to dry overnight before buffing it up.

It may not be a perfect finish, but it looks presentable and I have been able to keep the original shoulder strap in serviceable condition.

I'll put up a photo when I can persuade the phone to start talking to the internet again.

(Thanks Nick,Theo and Mark - )

Edit- Typo correct
« Last Edit: January 17, 2021, 11:55:41 AM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #18 on: January 16, 2021, 08:06:23 PM »


Refinished shoulder strap back on box. Moderately shiny.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Wilkinson of Glasgow: Excelsior Accordeon Project
« Reply #19 on: January 17, 2021, 07:04:51 AM »

Well done that man!!  It looks great  :Ph
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal