Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Saltarelle Irish Bouebe overhaul and conversion to D/C#  (Read 4186 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Saltarelle Irish Bouebe overhaul and conversion to D/C#
« on: January 30, 2020, 05:41:21 AM »

I've recently acquired an older Saltarelle Irish Bouebe in C#D that is is need of a complete overhaul, and in doing this I will also be converting it D/C#.  The exact history of this instrument is unknown to me but at some point the casework sustained some damage in what was likely a fall.  The seams came apart and at some point someone carried out rather crude but functional repairs.  The instrument also appears to have suffered from internal water damage as there are water stains on the reedblocks, and by the way in which rust formed on some of the reeds (and leather valve booster springs) it's apparent that they came in direct contact with water as well.  None of the above is particularly concerning as it can all be fixed, and in fact at the time of writing this the reeds have already been removed from the blocks and cleaned, de-valved, rust removed, etc.  The box will get new valves, wax and a full tuning at a minimum.

I'm assuming the original bass cover plate was destroyed in whatever incident also damaged the casework, as it was replaced by one wherein only *ONE*, tiny sound hole was drilled! Although the instrument is unplayable in its current state, the few sounds that came out of the bass end were obviously quite muffled as they struggled to make their way through the solitary 1 cm+ in diameter hole.  Ridiculous!  Perhaps whoever carried out the repairs never got around to drilling the other holes?  ;D  I will obviously be remedying this by drilling several new holes in the bass plate, but only after reinforcing the plate from the inside due to a crack that runs along the entire length of it  ::)  Thin ply glued to the inside, perhaps?

The one real downside to this project is that, as a C#/D, the inner row of buttons was designed to open the outer row of pallets.  This works well for C#D, but less so for a conversion to D/C#.  The difference in sound isn't huge, although a little more 'flutey' in tone.  I have already accepted that this is just the way it will have to be, but I'm curious about any possibilities that might help brighten the sound a little.  One thought I had was to carve out a small channel/groove between the two MM holes, something that is often done on LMMH one-rows to help make up for reduced pallet lift on the hole closest to the keyboard.  Any drawbacks to this approach, or any reason why I shouldn't do it?  The only other thing I can think of would be to either increase button height or lower the positive stop below the keyboard, neither of which I want to do.

Suggestions welcome.  I've attached a few photos displaying the state of things before work got underway.
« Last Edit: January 30, 2020, 06:04:21 AM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #1 on: January 30, 2020, 05:42:31 AM »

Here's the makeshift bass end cover plate with single sound hole!
Logged
C#/D player

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #2 on: January 30, 2020, 08:28:09 AM »

I have an older Irish Boube, if it helps I can post a pic of the bass cover plate.
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #3 on: January 30, 2020, 12:40:28 PM »

Maybe you could look for someone with a newer model with a conventional mechanism and offer to swap lever assemblies with them.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #4 on: January 30, 2020, 01:01:34 PM »

I have an older Irish Boube, if it helps I can post a pic of the bass cover plate.

Sure! Thanks!
Maybe you could look for someone with a newer model with a conventional mechanism and offer to swap lever assemblies with them.

If anyone has one, then certainly! I guess the newer ones no longer have this reversed setup? That would be an unusual design choice. I know that on models that came after mine the inner row of pallets had a cantilevered design to help increase pallet lift. This one does not.
Logged
C#/D player

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #5 on: January 30, 2020, 02:02:43 PM »

I've had two Bouëbes, one bought new in 2004, and currently an older one with white feet like yours. Cantilever mechanism on both. A student of mine bought one new in about 2007-2008 and I was very surprised to see that it had a completely conventional mechanism. I thought it was an unfortunate regression. I don't know what the setup is on more recent ones, perhaps another member can chime in.

My post was a little facetious, sorry. It's great that you are restoring the box even if I have to admit to a twinge of disapproval at your swapping the rows. The clear bright tone of the inner-row/top pallets setup is so wonderful to have! I believe we have Jackie Daly to thank for suggesting this arrangement to Georges Roux.

Good luck with the restoration and keep us posted.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #6 on: January 30, 2020, 02:04:48 PM »

Bass end cover plate on mine:

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #7 on: January 30, 2020, 02:34:58 PM »

My bass cover plate is the same as Stiamh's
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #8 on: January 30, 2020, 08:09:52 PM »

My post was a little facetious, sorry.

Yes, I thought it a bit of an unlikely suggestion, but I didn't want to sound ungrateful :P

Quote
It's great that you are restoring the box even if I have to admit to a twinge of disapproval at your swapping the rows. The clear bright tone of the inner-row/top pallets setup is so wonderful to have! I believe we have Jackie Daly to thank for suggesting this arrangement to Georges Roux.

Good luck with the restoration and keep us posted.

I figured that you might disapprove, even if just a little ;)  The good thing about a conversion like this is that it's completely reversible, so if I want to part ways with it sometime I can easily switch it back to C#/D and no harm done.

The D/C# over C#/D is probably an entirely different thread, but I've messed around with both systems and I find that I much prefer the former.  I suppose I've never really been one to follow convention, although I think my entry into the semitone box world follows in the footsteps of the old Irish-American one-row players that found the D/C# to be a natural progression of the D melodeon.  I also play the D/C# with a thumbstrap only and no shoulder strap (I can already see the furrowed brows of some as I type this  ;D ).  The Saltarelle will be getting a thumbstrap, too  >:E
Logged
C#/D player

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #9 on: January 30, 2020, 08:18:13 PM »

The photos of an original Bouebe bass cover plate would indicate the box was made by Baffetti. This would be what I call the "target"   bass plate.

Matt, the lever mechanism you have in your box is sought after, and considered the better of the systems used in the Bouebe  for the C#/D .

I note that D/C# is the preferred 2 row layout of Quebec players.

Ergo, I understand the desire to use the later mechanism.
« Last Edit: January 31, 2020, 02:00:28 AM by melodeon »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #10 on: January 30, 2020, 10:07:28 PM »

Look forward to seeing and hearing the results of your labours, Matt. The accidentals will ring out nice and clear!  (:)

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #11 on: January 30, 2020, 10:59:22 PM »

Re the holes in the bass plate:  perhaps go gradually.

I have been (slowly) restoring a Bouebe and had to redo the bass plate - one like Steve's.  Since the bass side of my Bouebe overwhelmed the treble side, I started with few holes.  When the restoration is done, I'll add more if need be.
I don't know if the bass-treble balance is a problem on all Bouebes - the builds seem to vary so much (my mechanism is the wire kind). But it might be a good idea to drill by stages. 
Logged
fc diato

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #12 on: January 31, 2020, 03:47:14 AM »

Re the holes in the bass plate:  perhaps go gradually.

I have been (slowly) restoring a Bouebe and had to redo the bass plate - one like Steve's.  Since the bass side of my Bouebe overwhelmed the treble side, I started with few holes.  When the restoration is done, I'll add more if need be.
I don't know if the bass-treble balance is a problem on all Bouebes - the builds seem to vary so much (my mechanism is the wire kind). But it might be a good idea to drill by stages.

Yes, I was thinking the same thing.
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #13 on: February 06, 2020, 01:11:57 PM »

mselic,

I'll be interested to hear how you like the result!

Generally I think of the DC# style as going along with boxes that have 3, 4, or more voices, and at least a basson (L) reed to go along with the clarinet (M) reeds.

But I've been playing a lot on a 2 voice MM DC# this week and it really has its own charm.

PG
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #14 on: February 09, 2020, 04:09:53 AM »

Quote

Generally I think of the DC# style as going along with boxes that have 3, 4, or more voices, and at least a basson (L) reed to go along with the clarinet (M) reeds.


I guess that's probably because in the heyday of D/C# boxes they were used to play in the large dance halls and needed as many voices as possible in order to be heard.  I don't know the history of semitone boxes in Ireland vs the US but for whatever reason the C#/D became the more popular of the two.  I don't see any reason these days why D/C# can't be a perfectly good semitone system in the MM configuration just as C#/D is.  I can imagine there may be stylistic differences as a result of the rows being switched (I'm too new to the system to pick out those details just yet), but for me I just play the tunes as I hear them and reach inside for the missing notes instead of out.  I really like it!  I sometimes play from the inside row-out (playing in the keys of C# and F# instead of D and G for example...some of the notes fall in the same place and bellows direction as they would relative to a C#/D, whereas others do not) but I find the D/C# infinitely more intuitive and easy to navigate.  In fact, I could never get on with the semitone systems until I decided to eschew convention and go with what I actually wanted to do.  Now I'm loving it!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #15 on: February 09, 2020, 04:51:33 AM »

Here's an update for those who may be interested.  Cosmetics aside, the box is now up and running as a D/C#.  I did a complete overhaul on the reeds, replacing valves and wax, tuning, etc. New bellows gasket and all new felt/leather pads on both the treble and bass pallets.  The bass pallet pads had to be repositioned several times as I had a very difficult time getting them to sit right and not leak air. In fact, chasing air leaks was an ongoing issue with this box!  The bass end plate that came with it (obviously homemade) was glued back together and I drilled out three additional sound holes to go along with the solitary one that was already there.

As mentioned earlier in the thread, this particular specimen of the Bouebe has the inner row of buttons opening the outer row of pallets.  This is great for a C#/D, but less so for a D/C#.  To try and mitigate the issue of less pallet lift on the inner row of pallets, I did a couple of things. Firstly, I raised the button height slightly (it was already nearly flush with the keyboard!) which achieved a little more pallet lift and, secondly, I carved out a small channel between the two MM holes of the inner row.  The theory behind the latter was that it would allow sound to travel from the innermost sound hole a little more easily, a practice that has already been adopted by many one-row builders in Quebec.  I'm happy to report that it actually made a difference in volume and even in brightness of tone, perhaps not quite enough to match the outer row but certainly an improvement.  I've attached a photo illustrating what I've done.

A few things arose during the process of overhauling this box that caused me a great deal of frustration.  For one, the reedplates were only *marginally* wider than the opening in the reedblocks, and in some cases if one side of the reedplate was making contact with the block, the other wasn't quite.  This would have been the case even in the original configuration of C#D.  There was no room for error, as the inner valves would then catch the edge of the reed chamber and not function properly.  These valves had to get repositioned or trimmed down in width. The reedplates were also spaced extremely close together, and I must admit to finding it a challenge to wax in between there.  I've experimented with many different methods in cases like these, and I'm curious to hear what others do?

Final modifications were ditching the grill (it really muffled the sound) and (I'm going to love saying this) ditching the shoulder strap and installing a thumbstrap instead  >:E  Since my thumb rests on the back 1/4 edge of the keyboard, the thumbgrooves on these keyboards really irk me as I end up with a sharp edge to rest my thumb on.  I solved this by (gasp) carving out my own little groove on one small section of the keyboard edge where my thumb would rest.  I installed the thumbstrap between buttons 4 and 5 of the outer row (4th button start) and my hand can easily reach anywhere on the keyboard and my shoulders and upper body remain liberated.  Love it!

I'm really enjoying the "Saltarelle sound" and the lovely keyboard action.  The volume, unfortunately, just isn't there, and that is partly due to the outer row/inner pallet configuration (also possibly because I'm used to 4 voices!).  I can already tell that at some point I will want to upgrade to a box that packs a little more punch.  In the meantime, it'll tide me over :)
« Last Edit: February 09, 2020, 05:02:02 AM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #16 on: February 09, 2020, 05:18:48 AM »

Here's a quick picture of the box taken at some point during the process.  The bellows could be re-taped but I'm not in any hurry at the moment!  I'm also ditching the bellows straps since for some reason they don't reach anyway...

I also meant to add: one thing that surprised me was the configuration of one of the bass notes...the G pull bass note had an E push! That's a head scratcher for me...my Erica, which had standard A/D bass notes, had the G in both directions, and the C#/Ds that I've tried in the past had a G pull and D push.  I can't for the life of me see how the E on the push would be desirable there... :o
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #17 on: February 09, 2020, 11:46:08 AM »

Here's a quick picture of the box taken at some point during the process.  The bellows could be re-taped but I'm not in any hurry at the moment!  I'm also ditching the bellows straps since for some reason they don't reach anyway...

I also meant to add: one thing that surprised me was the configuration of one of the bass notes...the G pull bass note had an E push! That's a head scratcher for me...my Erica, which had standard A/D bass notes, had the G in both directions, and the C#/Ds that I've tried in the past had a G pull and D push.  I can't for the life of me see how the E on the push would be desirable there... :o

I've often seen that pair of bass notes on the lower, inside bass buttons of Saltarelles in C#D (and recently saw  the transposed version, F press / Ab draw, on a Saltarelle DD# box). It's a transposition of what some people call "Billy McComiskey's bass system" for the BC box, which has D press/ F draw in that location. If you play Irish music on a B/C box it's useful to have D on the press, rather than the duplicated C press that you often find on Paolo Sopranis.   IMO, not so useful to have E on the press in a C#D box, although of course you can find a use for it.

PG
« Last Edit: February 09, 2020, 01:20:39 PM by pgroff »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #18 on: February 09, 2020, 01:38:02 PM »

What Paul said. An E push is useful if you want to be able to D play tunes B/C style, i.e. in E major, so that you have a chord for your push G#. Jackie Daly has an E push on his 12-bass boxes, but certainly not on that pair of buttons, for which I would strongly recommend G/G.

It's great that you have found a semitone system that suits you and well done on the ongoing restoration and mods.

As for volume... it depends on the style of music you play, I suppose, but maybe have a thought for the fiddle players that play with you. More than one local fiddle player has told me that they generally don't much like playing with accordions (meaning 4-v one-rows), but that they don't mind playing with me and my MM or MMM machines.

That may also be partly because I don't try to put out a lot of volume, because to me, the fiddle is THE instrument and my aim is to tuck in behind and complement the fiddle player rather than giving them something to compete with (if they are good, anyway  >:E). Of course I am a fiddle player at heart and I still remember a couple of unpleasant experiences of being drowned out by big red wet-tuned 4-v Paolos. I hasten to add that I'm not assuming that you are that kind of box player, but just trying to put it to you that MM is not all bad.

Mind you, a month or so ago I was at a house session where at one point the visiting flute player strapped on some Scottish small pipes in A that were extremely loud. I decided to try to rival him for volume with my own Bouebe and it was surprising how much power was lurking in that little "Irish baby". My fiddle playing friend, whom I play with very often, was sitting between the two of us, raised an eyebrow and afterwards expressed his appreciation of the fact that I usually have more restraint.

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #19 on: February 09, 2020, 01:49:45 PM »

...

It's great that you have found a semitone system that suits you and well done on the ongoing restoration and mods.

As for volume... it depends on the style of music you play, I suppose, but maybe have a thought for the fiddle players that play with you. More than one local fiddle player has told me that they generally don't much like playing with accordions (meaning 4-v one-rows), but that they don't mind playing with me and my MM or MMM machines.

...

Words of wisdom from Stiamh. Of course, looking back on his earlier comments there was some wisdom there too. I.e., the "old style" Saltarelle action does favor an inside-row playing style as he noted, so in the big picture it might have made sense to restore this box as a C#D or BC, and wait for another box with the more typical action to restore as your DC# MM box. Now that you may be looking to move on from this Bouebe, the point may be clearer. Rather than trying to "re-forge" the box you have into something it isn't, sometimes it makes sense to send that box to another player who prefers its own intrinsic features.

But I'm sure you learned a lot in the process so that's invaluable!

Agree too with Stiamh about controlling volume, though sometimes in professional situations it's your job to be loud and be heard when leading a group.

My earlier point about DC# style and voicing (LMM or more) wasn't so much about volume but about tone quality and a sort of explosive attack. The 4 stop melodeons that Stiamh mentioned don't have to be played loud, that's just a style. And even the 6 voice and 8 voice Baldonis can be played softly but still with their characteristic rich tone.

Anyway, great work and thanks for sharing the journey with us!

PG
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal