Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Saltarelle Irish Bouebe overhaul and conversion to D/C#  (Read 4164 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #20 on: February 09, 2020, 03:56:56 PM »

Steve and Paul, good points from both of you and thank you for the feedback.  Regarding volume, rest assured I'm not the box player at the session who likes to drown everyone else out; in fact, I'm actually a rather timid and quiet player in these settings, and often even in my band.  I suppose I still deal with the stigma of box playing and my assumption is that no one wants to hear the accordion, so my playing sometimes comes out sounding almost apologetic!  I have often had people say to me in sessions "I thought those things were supposed to be loud! Speak up!".  What I've discovered is that I like a box with good volume and clear tone that doesn't require a lot of effort to be heard.  This way, I can easily dial it back and play quietly, but when volume is needed I don't have to strain my shoulders to make the box stand out.  The Melodie one-row in LMMH is great in this regard.  That thing can be a monster but I usually play it at around 50-75% and only open it all the way up when the situation requires.  I've played much quieter boxes in sessions and dances where the fiddle player next to me will tell me they can't hear me at all!

Regarding the idea that this instrument maybe shouldn't have been converted to D/C# on account of the pallet configuration, I'll mention once again that it's completely reversible with much less work than was originally required.  Aside from the small groove that I created one spot on the edge of keyboard for my thumb (which does not interfere with the operation of the instrument if you like to have your thumb directly in the original groove...cosmetically possibly a detractor for some, though) the instrument can easily be a C#/D again for someone.  I have less issue making modifications on an old instrument that's already in pretty rough shape cosmetically and internally.  This is a box I won't worry about getting banged up at the pub!

Regarding basses, I'd like to convert the E push/G pull to G push/Gpull.  Looks like it's time to go through my stockpile of PA reeds and find the appropriate ones...

Thanks, guys!
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #21 on: February 09, 2020, 04:17:20 PM »

Hi mselic,

Great points!

From my perspective, in the case of rescuing this distressed, non-antique, and not-rare box it's not so much about "should" from an ethical perspective, just in terms of efficiency and having to reverse things.

I would see that box as a good one to restore for C#D. If that does happen in the future, well at that point the work would have had to be done to convert it twice.  In the meantime it was maybe not the ideal box soundwise for a DC# as Stiamh suggested at the beginning.

I saw a similar issue some time ago when one friend had a new Italian box in LMM made as a DC# and the maker used the reverse action. Another friend had a new Italian box made as a C#D in LMM, and that one was built by the maker using a more traditional action design.  On both of their boxes it was the C# row that was nice and clear, not the D row!  Exactly as Stiamh remarked, the accidentals really rang out - but not so much the main notes of the D scale which were the focus of both players' style.

But again, you had a great experience learning so that is time well spent

Best,

PG
« Last Edit: February 09, 2020, 04:21:44 PM by pgroff »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #22 on: February 09, 2020, 04:44:03 PM »

I would agree that in future I would not convert a box of this design to D/C# for the reasons you both mentioned. Interestingly enough, there was certainly room from a design perspective to move both sets of pallets (and obviously blocks inside) further out away from the keyboard like in a Hohner Erica, thereby allowing more pallet lift overall and certainly so for the inner row of pallets.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #23 on: February 09, 2020, 04:55:20 PM »


As mentioned earlier in the thread, this particular specimen of the Bouebe has the inner row of buttons opening the outer row of pallets.  This is great for a C#/D, but less so for a D/C#.  To try and mitigate the issue of less pallet lift on the inner row of pallets, I did a couple of things. [[snip]] I carved out a small channel between the two MM holes of the inner row. 


You can take this a stage further and take your channel out the full thickness of the fondo.   This is a factory feature of many Italian two row boxes, especially Saltarelles.

Another modification is to make some openings in the top plate of the keyboard like this:



Or on the rear of the keybord like this:


Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #24 on: February 09, 2020, 05:34:06 PM »

Quote
You can take this a stage further and take your channel out the full thickness of the fondo.   This is a factory feature of many Italian two row boxes, especially Saltarelles.

I was wondering about that, Theo.  My concern was that there could be an unwanted side-effect to this, such as potentially the reeds locking together in unison due to their relatively close tuning (this actually happened with this box until I re-attached the stabilizer bar between the two reedblocks...didn't know that it actually served any real function, but it certainly made a huge difference in this case!).  Are there no issues with doing this?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #25 on: February 09, 2020, 06:17:42 PM »

I’ve not done the modification myself, but I’ve seen plenty where it’s been done by the factory.  Sorry it’s not a conclusive answer.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #26 on: February 09, 2020, 09:06:15 PM »

Quote
You can take this a stage further and take your channel out the full thickness of the fondo.   This is a factory feature of many Italian two row boxes, especially Saltarelles.

I was wondering about that, Theo.  My concern was that there could be an unwanted side-effect to this, such as potentially the reeds locking together in unison due to their relatively close tuning (this actually happened with this box until I re-attached the stabilizer bar between the two reedblocks...didn't know that it actually served any real function, but it certainly made a huge difference in this case!).  Are there no issues with doing this?

You can safely remove all the wood between the openings. I've done it. There are no adverse side effects,
and in my case, it did improve the volume and brightness of the tone.
Having separate air vents is useful when tuning a single bank of reeds in the box. One opening to both reeds makes that process a little bit more tricky, but not difficult to work around it.
Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #27 on: February 09, 2020, 10:23:42 PM »

You can safely remove all the wood between the openings. I've done it. There are no adverse side effects,
and in my case, it did improve the volume and brightness of the tone....

Completely agree with Pearse.....I've done this myself and also found it as a variant on some boxes, where the wood between the holes was often (but not always) removed on manufacturing.... Club 3BS, 3BR as well as Ouvertures and 3-voice 2915s.

But since every instrument( Bouebe in this case) is different, I'd experiment with one button/pallet first and assess the effect...easy to reverse one cut....

Cheers

Mike R
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #28 on: February 10, 2020, 03:45:08 AM »

Hmmm, well I experimented by removing the remaining wood between the two sound holes on a couple of the notes and the result was indeed the two reeds ‘locking’ together and sounding in unison. This is exactly what I was concerned might happen. I’m not going to mess about with them anymore and am currently undertaking the finicky process of trying to repair the holes...
Logged
C#/D player

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #29 on: February 10, 2020, 04:47:28 AM »

Try a second strap across the blocks.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #30 on: February 10, 2020, 05:15:11 AM »

You said earlier that you had a problem with the reeds locking in unison, and that was before you expanded the air holes.
Whatever the cause of the problem, I don't think it is being caused by the cut-away air holes.
Make sure the blocks are held rigid, and maybe use a second strap as well.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #31 on: February 10, 2020, 05:46:43 AM »

You said earlier that you had a problem with the reeds locking in unison, and that was before you expanded the air holes.
Whatever the cause of the problem, I don't think it is being caused by the cut-away air holes.
Make sure the blocks are held rigid, and maybe use a second strap as well.

No. The problem of them locking in unison happened after I cut the initial channel between the air holes but before I put the stabilizer bar back in place between the reedblocks (I had left it out during individual reed tuning).  The problem with the reeds locking in unison is most definitely linked to cutting away the wood this last time around. I could only get the problem to go away after I had replaced the wood between the holes, and even then only once I had properly sealed off any space where the gasket had been cut away between the two holes. As soon as the repair was made, the reeds ‘unlocked’ again. Perhaps a second bar would help, but at this point I’ve already made the repair.
Logged
C#/D player

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #32 on: February 10, 2020, 05:49:15 AM »

I see. Glad you got it sorted.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #33 on: February 10, 2020, 06:16:18 AM »


I'm glad you followed Microbot's advice here!

But since every instrument( Bouebe in this case) is different, I'd experiment with one button/pallet first and assess the effect...easy to reverse one cut....

....  The problem with the reeds locking in unison is most definitely linked to cutting away the wood this last time around......

I didn't have any such problems, and I have done this on a couple of boxes.
Not all boxes will need those straps across the blocks either.
I don't know....still suspect something else is going on.
It would be easy enough to experiment with this effect on a tuning table.
I might try it when I have time.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #34 on: February 10, 2020, 10:43:14 AM »

The reed locking effect is *very* unpredictable. You can have two apparently identical boxes and it can happen on one and not the other.  Often it’s just one note that is affected, and the same note on the other block is not affected.
I’ve never been able to reproduce the effect on a tuning table, so very interested in the results of the experiment.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #35 on: February 10, 2020, 11:43:24 AM »

Sounds like it's a deeper mystery than I might have imagined.
As regards any experiment; I will report back if I happen to unearth anything.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #36 on: February 10, 2020, 03:39:01 PM »

I was unable to reproduce the effect on a tuning table.  It was a very controlled experiment on my end; everything was checked before, during and after the modifications, and the only variable was removing all of the wood between the two sound holes.  Only the holes which had all the wood removed between them created the effect of the reeds locking together in unison.  The adjacent notes were fine.  My experience was this:

-stabilizer bar (or whatever it's called) between the reedblocks was removed during reed overhaul and tuning (and then forgotten about).  After tuning, all notes sounded fine.

-I decided to try carving out a small channel between the two sound holes on the inner row of pallets.  My only concern was that the reeds might lock together in unison as a result.  It was a hunch, nothing more.  After carrying out the work and reassembling the instrument, I was dismayed to discover that the undesired effect had indeed occurred.  At this point I remembered the stabilizer bar and re-attached it and that solved the problem.

-I then decided to attempt removing all of the wood between the sound holes, starting with just a few.  Tuning, etc was spot on beforehand.  I cut out the remaining wood on a couple of notes, and on those notes the reeds then locked together and sounded in unison.  I checked the tuning of each reed, and the adjacent notes, and all was fine.  The stabilizer bar was in place.  I then began to experiment a little by partially covering some of the (now widened/joined) holes on the soundboard with a small piece of masking tape, just to see if it would make a difference.  Doing so created wild and unpredictable results such as the tremolo increasing well beyond my tuning.  Removing the tape resulted in a perfectly dry sound once again.

-I decided to replace the missing wood.  Once the repair was done, I found that there was *some* tremolo but not as much as there should have been.  I checked the tuning and all was well.  I then discovered that on the inside where the reed gasket had been cut away as part of the wood (the gasket was on the fondo) there was not a perfect seal.  Once I sealed that up completely, the reeds sounded normal again, the tremolo sounding once again as I had tuned them and as they had been before the modification.

Perhaps an additional stabilizer bar would have helped, but I don't know and I don't think I'm keen on cutting more holes only to have to repair them again.
« Last Edit: February 10, 2020, 03:42:05 PM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #37 on: February 10, 2020, 03:50:41 PM »

Here is a photo of the outside of the repair (hole on the far left).  I fashioned a new piece of wood to fit between the two sound holes which still retained a channel like I had originally created to increase air flow/volume.  Not visible in this photo, but the backside had to be completely flush with the fondo gasket in order for the problem to go away and for the reeds to sound at the proper beat frequency.
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #38 on: February 10, 2020, 06:17:55 PM »

Interesting problem (easy to say when you don't have it!  ;D).  Seeing that manufacturers sometimes remove the wood between holes (as mentioned by Mike R), there must be a way to avoid the reed locking.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Saltarelle Irish Bouebe overhaul and conversion to D/C#
« Reply #39 on: February 10, 2020, 07:16:54 PM »

Perhaps bu tuning after the holes are in their final form, rather than before a significant alteration.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal