Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: tuning reeds  (Read 4160 times)

0 Members and 1 Guest are viewing this topic.

Patrick mc cune

  • Member
  • *
  • Offline Offline
  • Posts: 4
tuning reeds
« on: January 30, 2020, 05:56:55 AM »

I have reeds coming factory tuned in bc, dry, on a 3 voice corso,21 x 12 bass ,also  would love to know where to install all these basses, in sequence, And i will have to fine tune all of these these , any tips  or where can i find more info than you tube, which i find is limited, to lestor,only. which is great.  What is the big secret  .
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: tuning reeds
« Reply #1 on: January 30, 2020, 07:01:19 AM »

Others will be along before too long to give sage advice on the dark arts, but my tip is not to try and learn the skills and pitfalls of reed fettling on a brand new set of reeds! Buy an old junker PA and (get lots of) practice on that, you will also need to acquire a few specialst tools too. If you tell us what part of the world you are in there may be someone nearby willing to help. Best of luck with it and don't rush into anything.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: tuning reeds
« Reply #2 on: January 30, 2020, 07:18:18 AM »

Others will be along before too long to give sage advice on the dark arts, but my tip is not to try and learn the skills and pitfalls of reed fettling on a brand new set of reeds! Buy an old junker PA and (get lots of) practice on that, you will also need to acquire a few specialst tools too. If you tell us what part of the world you are in there may be someone nearby willing to help. Best of luck with it and don't rush into anything.

I couldn't agree more.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: tuning reeds
« Reply #3 on: January 30, 2020, 08:15:33 AM »

Learning by trial and error is how I got started.  By that process you *will* make errors and therefore I agree with the above -  get one or more junk boxes to learn on.

And something else to remember: even reeds that are tuned by the reed maker will need the gaps setting and a final tuning after after being installed in the instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: tuning reeds
« Reply #4 on: January 30, 2020, 10:54:36 AM »

Here is the big "secret": Proper training and years of experience. But this secret is not bigger than that of many other professions...
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: tuning reeds
« Reply #5 on: January 30, 2020, 12:13:19 PM »

You may find these two videos interesting.

Reed tuning tools


Pre-tuning reeds

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: tuning reeds
« Reply #6 on: January 30, 2020, 03:32:31 PM »

Here is the big "secret": Proper training and years of experience.

"Proper training" is open to interpretation, and might well be very difficult to find. "Good advice" is a more promising area to explore, I feel.

Experience - yes, absolutely. Make loads of mistakes on cheap/scrap boxes, and try to talk to as many box-fettlers as you can (starting here, of course!).  You'll find most of them only too pleased to share their experiences with you.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: tuning reeds
« Reply #7 on: January 30, 2020, 04:15:18 PM »

You may find these two videos interesting.

I hadn't spotted that diatonix had posted earlier so my links are a coincidence!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: tuning reeds
« Reply #8 on: January 30, 2020, 04:48:39 PM »

The Benetoux books are worth a look, esp the Sounding Out the Accordion. As Theo says, it takes a lot of practice and patience to get the hang of it. You'll spend many hours chasing your tail  (:)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: tuning reeds
« Reply #9 on: January 30, 2020, 07:28:58 PM »

I have The Ins and Outs of the Accordion by Thierry Benetoux, cost about £40 many years ago!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: tuning reeds
« Reply #10 on: January 30, 2020, 11:11:32 PM »

I embarked upon learning to tune last summer, and I second-third-or fourth the advice to practice first on reeds that don't matter!!!
- then, if you search this forum, you will find reams of precious and generous and expert guidance
- and there's this http://accordionrevival.com/ACCORDION_REPAIR_3.php   
Logged
fc diato

Patrick mc cune

  • Member
  • *
  • Offline Offline
  • Posts: 4
Re: tuning reeds
« Reply #11 on: February 01, 2020, 05:54:04 AM »

Hey thanks for all the great tips , lots of nice people on here , i have all the tools,and loads of old reeds to mess with, already ruined  a set , but i am not giving up,this could be addictive,  i am a carpenter, so the mechanical part  is not to bad .thanks again .
Logged

Graham Wood

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 132
  • Old Fumble Fingers
Re: tuning reeds
« Reply #12 on: February 01, 2020, 12:23:13 PM »

I know nothing about tuning reeds but I do a lot of guitar set ups and a really good tuner is very important. I'm guessing that you would need something that would allow you to set A4 (A above middle C) to either 440 hz standard pitch or any other pitches like 442. You would also need a cents read out so you can offset the pitches on multi-voice reeds and also the ability to vary temperaments. I used to have a Korg LCA-120 which was great but now use a Peterson Desktop Strobe tuner.

As far as reeds go, it just tells me whether they are sharp, flat or dead on, I wouldn't dream of fiddling with them.....lol. But I guess I have a faint heart when it comes to fettling things.
Logged
Graham Wood - Third Planet from The Sun
Hohner Morgane B/C,   Junior Martin 1 Row in 'D' with knobs on top,   Acadian 1 Row in 'C' with more knobs on top.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: tuning reeds
« Reply #13 on: February 01, 2020, 05:18:52 PM »

Things which can affect the pitch and performance of reeds also govern the order in which tuning should be done:

  1. Check reed plates are firmly held on the reed block. Loose wax or reed screws/nails will affect the stability of the reed pitch.

  2. Check reed blocks are firmly held/clamped in place (but not excessively over-tightened). Loose reed blocks will affect the stability of the reed pitch.

  3. Check valves are working properly - not curled, not old and stiff, lifting as they should when bellows activated. Also, not loose and about to fall off. If you can pull a valve off with lightest of finger tension, it's close to falling off and should be replaced (probably they will all be like that!). Replace any faulty valves with new; don't try to re-use old valves. Valves can affect the pitch of the reeds so it's essential to get them right before attempting any tuning.

  4. Reed tip gap should be at its optimum. Too high and the reed will be slow to start, possibly loud, breathy and a bit flat. Too low and the reed will have a weak sound, or not sound at all, and tend to be slightly sharp and unstable in pitch.

Get all these things right before you even begin to file or scratch the reed tongues. There are threads on this forum which cover these points, or ask more questions here.

General hints:
Larger, low-pitched reeds are often flat to start off, and then rise to achieve their working pitch after a couple of seconds. The larger push reeds are  usually more prone to this than the pull reeds. To compensate for this, tune the reeds slightly sharp (perhaps 1 - 2 cents sharp).

Reeds tuned on a reed block outside the instrument will nearly always be sharp - typically 3 - 5 cents, sometimes more. Final/fine tuning of the reeds must be done with the reeds in situ in the box.

Once the reeds are tuned to an electronic tuner, switch it off and play/listen. Particularly on the treble side, listen to notes sounded in octaves and fifths. For fine tuning, adjust any tuning to what your ears are telling you, not what the tuner tells you. It should go without saying that you need a good ear in order to tune properly.

After tuning, let the reeds settle for a day or so and then play-test them again. They may have shifted in pitch as the stresses induced by filing/scratching even themselves out and you may need to make small corrections, especially to get the right degree of tremolo. Again, use your ears and not necessarily the tuner.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Earl Bryce

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: tuning reeds
« Reply #14 on: February 06, 2020, 05:36:50 AM »

I am very new at this, so this is more of a question than advice, but after tuning one row up to what I thought was on pitch, the next day I went back and checked the tuning again, but I was at another location than where I had initially tuned, and I found that nearly all of the notes were a few cents sharp (about 3 or so) and this got me wondering: does altitude and air thickness effect the pitch of the reeds? There is about 3000 ft elevation difference between the two locations. Or is this more likely caused by the reeds settling, as Steve suggested previously?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: tuning reeds
« Reply #15 on: February 06, 2020, 07:42:46 AM »

I am very new at this, so this is more of a question than advice, but after tuning one row up to what I thought was on pitch, the next day I went back and checked the tuning again, but I was at another location than where I had initially tuned, and I found that nearly all of the notes were a few cents sharp (about 3 or so) and this got me wondering: does altitude and air thickness effect the pitch of the reeds? There is about 3000 ft elevation difference between the two locations. Or is this more likely caused by the reeds settling, as Steve suggested previously?
The effects of changing temperature and air density* on the pitch of reeds has been previously touched on in the forum. There will probably be a few posts/threads about it if you use the Google Search option in the blue strip menu below the forum banner. There ought to be some difference but as far as I know, no-one has come up with any firm explanation, let alone quantified it. Here in the UK, there are few people living much above 1200 ft and I don't think anyone is going to be doing tuning work on top of Scafell Pike, Snowdon or Ben Nevis, so the question doesn't really arise here. But I can see it possibly becoming an issue in other countries.

The reed tongue vibration frequency determines the pitch of the note heard, not by the vibration itself, but by the pulses of air released each time the reed tip achieves its maximum swing amplitude. I suppose it is feasible that less dense air (higher altitude) has less of a dampening effect on the reed tonge frequency and hence allows it to vibrate faster and therefore produce a sharper pitch. But I don't know for sure - I may be talking complete ballcocks. Cue a real physicist/engineer to enter the fray; Ian Dedic, perhaps? 

* inversely proportional to altitude
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: tuning reeds
« Reply #16 on: February 06, 2020, 11:13:51 AM »

Here in the UK, there are few people living much above 1200 ft and I don't think anyone is going to be doing tuning work on top of Scafell Pike, Snowdon or Ben Nevis, so the question doesn't really arise here. But I can see it possibly becoming an issue in other countries.


I live at 2700ft asl, and it's never been a problem for me.  Of course there are people living at much higher altitudes......

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: tuning reeds
« Reply #17 on: February 06, 2020, 04:59:35 PM »

Here in the UK, there are few people living much above 1200 ft and I don't think anyone is going to be doing tuning work on top of Scafell Pike, Snowdon or Ben Nevis, so the question doesn't really arise here. But I can see it possibly becoming an issue in other countries.

I live at 2700ft asl, and it's never been a problem for me.
I don't think there would be a problem unless you are doing accurate comparisons of tuning between atltitude A and then at (significantly different) altitude B. Earl Bryce mentions a 3 cent difference for a change in altitude of 3000 ft. I suspect most people would not be able to distinguish that sort of difference in tuning by ear anyway.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: tuning reeds
« Reply #18 on: February 06, 2020, 05:33:17 PM »

I'm sure you're absolutely right, Steve. Personally  I think there's a danger of relying too much on what the digital meter says and not enough on what our ears tell us sounds pleasant.  I'm not blessed (cursed?) with perfect pitch, so I go where the meter tells me and then finely adjust until it sounds good to my ears.  Apologies to anyone with perfect pitch who thinks my boxes sound excruciating!  ;D

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: tuning reeds
« Reply #19 on: February 06, 2020, 09:36:59 PM »

I suppose it is feasible that less dense air (higher altitude) has less of a dampening effect on the reed tongue frequency and hence allows it to vibrate faster

What determines the reed vibration frequency is the stiffness of the reed acting a a spring, combined with its effective tip mass. (made hard to calculate with school physics pendulum formula because both mass and springiness are distributed along the reed length, but we'll ignore that detail.)
Air in the immediate vicinity of the reed tip will add a tiny amount to the effective mass, so lower density air might raise the pitch a bit by adding a bit less of that extra mass. But I'd expect the effect to be very tiny.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal