Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Erika club  (Read 744 times)

0 Members and 1 Guest are viewing this topic.

Richard Hukins

  • New Starter
  • Offline Offline
  • Posts: 2
Erika club
« on: February 03, 2020, 09:51:37 PM »

Hello, what is the secret of getting Erika club buttons to all arrive exactlly through the holes in the plastic keyboard, i bought the box in bits, the treble linkage was loose & it was a bit bent, i got new felt & leather from Charlie for the pallets which is fairly thick so adjustment has to happen, this linkage makes an ordinary two row Hohner look so easy, do the experts have any advice before i go mad. Richard.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Erika club
« Reply #1 on: February 03, 2020, 10:13:56 PM »

You just have to spend ages with a pair of long nose pliers tweaking the levers until the buttons line up with the holes.  Have the top plate loose so you can put it on after each bend to check.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Erika club
« Reply #2 on: February 03, 2020, 10:42:39 PM »

Sometimes you find that the celluloid? plastic top of the keyboard has become shrunken over the years,  the give away is whether or not the plate fits the wood work perfectly and whether the top screw holes will sit back over the pegs.   This normally manifests in the accidental buttons fouling the top of the hole which stop the pallets landing fully.  a light attack with a half round file helps here . but be careful that weird old plastic files away very easily.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Erika club
« Reply #3 on: February 03, 2020, 10:55:15 PM »

That’s try about the top shrinking, I’ve usually managed to avoid enlarging holes by carefully applying a slight straightening to the bends in the levers which lengthens the lever just enough.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Richard Hukins

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Erika club
« Reply #4 on: February 04, 2020, 10:18:32 AM »

Thank you all, i am now there, it really is a pain of a job, the linkage is a work of art, yes the cover doesn't sit on the two dowels easily, makes an ordinary two row seem so easy, they must have had a jig at Hohners i suppose that allowed access from the back like a backless keyboard. Once again many thanks.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal