Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Soundboard covering on old Club III  (Read 617 times)

0 Members and 1 Guest are viewing this topic.

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Soundboard covering on old Club III
« on: February 26, 2020, 10:37:45 PM »

Following this post http://forum.melodeon.net/index.php/topic,25087.0.html  I decided to have a poke around inside my IIIBS project.  Most of what is inside is great.  Apart from the fact that some muppet has poured some sort of goop all over the leather soundboard covering which the reedblocks seal against.  Has anyone replaced this and how did you go about it?  I figure that once I have chipped and scraped away the old leathery stuff ( it is actually some kind of synthetic leather with a fabric backing) I could use evo stick to fix goat or sheepskin in its place then cut out the holes from the front? Does this sound reasonable.  Would Olovesc be better?  I am in a bit of a quandary. Also quite annoyed by the bodgery.  At least it isn't bath sealant I suppose
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Soundboard covering on old Club III
« Reply #1 on: February 26, 2020, 10:42:59 PM »

Olovisc would be much easier to use and would work just as well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal