Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Melodeon Restoration- Traditional materials  (Read 6893 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Melodeon Restoration- Traditional materials
« on: February 27, 2020, 11:55:51 PM »

Starting this topic in the hope of drawing some reliable information about materials used in key elements of pre 1940 melodeons.
In particular pallets, facings and gaskets - but also, critically the glues / glue types used to attach facings to pallets.

so- what type of glue would be used to attach what appear to be chamoiis leather facings to the pallets of pre war German Type (open pallet) boxes?

Using pva would worry me because the glue bond might prove stronger than the wooden substrate of th pallet .
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Melodeon Restoration- Traditional materials
« Reply #1 on: February 28, 2020, 12:28:15 AM »

Assuming that you don't want to reface the pallets with the original thin leather, then I can't see the point in using traditional glues either. The Persian leather and felt stuff that Charlie Marshall sells is lovely, and quiet. It sticks with ordinary contact adhesive. There are whole threads here on it. If you can't find them, I can have a look for you.
I've done it 3 times only, but it was straightforward and gives a lovely quality job - you do have to adjust the key height afterwards. One of the experts will be along shortly I'm sure, and if they disagree with me - listen to them.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Melodeon Restoration- Traditional materials
« Reply #2 on: February 28, 2020, 12:57:44 AM »

Quote
what type of glue would be used to attach what appear to be chamoiis leather facings to the pallets of pre war German Type (open pallet) boxes?

Animal glue or fish glue I would imagine.
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Melodeon Restoration- Traditional materials
« Reply #3 on: February 28, 2020, 01:15:31 AM »

The chamois leather works fine on small pallets and would preserve the ‘look’ particularly on an open treble end. I doubt there is much safe yield on those older levers to accommodate the button height re-setting following use of  thicker facings.
I guess peadar wants to keep it so.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #4 on: February 28, 2020, 07:56:41 AM »

I don't think the pallet facing material used on pre-war boxes is chamois. It's also not the authentic colour, being quite yellow usually.  The leathers used pre-war mostly look like the typical brownish shade found it traditional un-dyed veg tan and are often very variable in thickness and texture.    The only modern veg tanned leathers I've found are not soft enough for pallets.  A soft tanned sheep leather is effective.  Sheep nappa is the nearest modern equivalent I think and widely available from the leather trade and is much more consistent in thickness and texture.  It is a very soft and pliable material.   Carini do a very nice pallet leather which I use along with a 1mm layer of felt.  My personal experience is that this makes a more compliant and slightly quieter facing than the Persian leather mentioned previously.  I don't have a count of how many boxes I've re-faced pallets on, but it must be into the 100s by now.
Pre-war glue would have been natural either hide glue, starch paste, or gum arabic based.  The important thing is to use only the minimum amount of glue and apply to the wood surface only, to avoid glue soaking into the facing material and hardening it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Melodeon Restoration- Traditional materials
« Reply #5 on: February 28, 2020, 08:20:15 AM »

The chamois leather works fine on small pallets and would preserve the ‘look’ particularly on an open treble end. I doubt there is much safe yield on those older levers to accommodate the button height re-setting following use of  thicker facings.
I guess peadar wants to keep it so.

That's pretty much it- and the actions themselves are wooden apart from the pallet lever.

Whilst I understand that a lot of people choose to modify older boxes I am aiming for restoration to near original condition and playability. That actually involves enjoying pallet clack as part of the distinctive sound of the instrument.

(Theo posted while I was  workng out what to say - will come back to this after work)

« Last Edit: February 28, 2020, 08:24:01 AM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #6 on: February 28, 2020, 08:29:29 AM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Melodeon Restoration- Traditional materials
« Reply #7 on: February 28, 2020, 09:10:55 AM »

The chamois leather works fine on small pallets and would preserve the ‘look’ particularly on an open treble end. I doubt there is much safe yield on those older levers to accommodate the button height re-setting following use of  thicker facings.
I guess peadar wants to keep it so.

That's pretty much it- and the actions themselves are wooden apart from the pallet lever.

I have done a few refacings on pre-war Hohners. In my experience it is perfectly possible to safely bend the metal pallet arms sightly and gently to accommodate new facings on the pallet. Just go carefully, using two pairs of pliers to bend the metal arm, and avoid straining the join where the metal pallet arm enters the wooden lever arm. The hole in the wood at this point is the vulnerable part of the action. Sometimes there is already a crack in the circumference of the hole which can cause the metal pallet arm to be loose or shift about. It's worth repairing this with a touch of superglue before it breaks entirely. The superglue wicks its way into the crack nicely.

And while I have sympathy with some uses of period/traditional materials, sometimes the pragmatic argument wins out and I believe this is a case in point. The wood was never cracked when first made, so the failure is post-manufacturing, in which case I have no qualms in using a modern substance to effectively, easily, and invisibly repair and secure the damage.





Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #8 on: February 28, 2020, 10:56:03 AM »

If you use pliers to bend levers make sure they have smooth jaws, or you risk damaging the surface.  Much better to make some simple bending tools.  I’ll post a photo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #9 on: February 28, 2020, 11:04:06 AM »

Photo of bending tools.  These are made for concertina levers.  The slot need to be a close but not tight fit on the rod.  Material needs to be strong.  Mild steel is too soft, mine are made of 5/16” silver steel.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Melodeon Restoration- Traditional materials
« Reply #10 on: February 28, 2020, 01:01:59 PM »

To bend wires remember also the range of othodontic tools an Ebay. Both three jaw and arching pliers can be had at about £7 a pair. If used correctly these bend the wire without placing any stress at all on the ends of the wire, ideal for concertinas where button keys especially of bone and glass are easily broken by careless bending.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Melodeon Restoration- Traditional materials
« Reply #11 on: February 28, 2020, 01:17:29 PM »

Photo of bending tools.  These are made for concertina levers.  The slot need to be a close but not tight fit on the rod.  Material needs to be strong.  Mild steel is too soft, mine are made of 5/16” silver steel.

I cut slots in old 8-12mm allen (hex) keys.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #12 on: February 28, 2020, 01:32:01 PM »

Old screwdrivers can also be made into bending tools.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Melodeon Restoration- Traditional materials
« Reply #13 on: February 28, 2020, 03:21:10 PM »

If you use pliers to bend levers make sure they have smooth jaws, or you risk damaging the surface.  Much better to make some simple bending tools.  I’ll post a photo.
Yes - I should have added that I use round-nosed pliers.
I like Theo's bending tools...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Melodeon Restoration- Traditional materials
« Reply #14 on: February 28, 2020, 11:08:17 PM »

Staying with pallet facings...
Two photographs here: On the left a 19key/4 bassWilkinson Excelsior 1926) with the lowest pallets out of both rows and what I think is my oldest International C&C# (1897-1914?) with the lowest pallet out of the C row.

The second photo shows the pallets .close up

The original facings of the Wilkinson appear to have been a brown leather. The facings of the inner row appear original, but the outer row pallets seem to have been refaced with what looks like a white felt.

The international pallet on the (Right hand side) appears to have white shammyed leather treble facings. I haven't removed pallets from any other Internationals to get a clear view of the facing material- but all seem to be white.
« Last Edit: February 28, 2020, 11:11:03 PM by Peadar »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Melodeon Restoration- Traditional materials
« Reply #15 on: February 28, 2020, 11:14:48 PM »

Next questions will be on gaskets and bellows tape
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon Restoration- Traditional materials
« Reply #16 on: February 28, 2020, 11:26:16 PM »

The white leather on the pallets is almost certainly a soft tanned sheep.  You can still buy very similar leather in various colours including white.  I don’t think the original builders would have been very fussy about what leather they used,  anything of the right texture would have been used.  It’s not chamois, it’s just the flesh side of the leather which is visible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Melodeon Restoration- Traditional materials
« Reply #17 on: February 29, 2020, 11:48:53 AM »

Thanks for that Theo.
As a child I heard the word "chamois" as the general term for a wash leather - much later I learnt it is properly applied only to leather from a particular Swiss? breed of goat. Recently learnt shammying was/is a Scottish (British?) tannery term for a process which produces wash and similar leathers typically from sheepskin.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Melodeon Restoration- Traditional materials
« Reply #18 on: February 29, 2020, 12:48:47 PM »

Thanks for that Theo.
As a child I heard the word "chamois" as the general term for a wash leather - much later I learnt it is properly applied only to leather from a particular Swiss? breed of goat. Recently learnt shammying was/is a Scottish (British?) tannery term for a process which produces wash and similar leathers typically from sheepskin.
See here:
https://en.wikipedia.org/wiki/Chamois
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Melodeon Restoration- Traditional materials
« Reply #19 on: March 03, 2020, 08:22:53 AM »

Bellows Tape - and more importantly appropriate glues/pastes for bellows tape.
Bellows tape itself - focussing first on 1897-1919 International open pallet types. Was buckram the original material? Some may have been given a laquer finish?

But at the end of the day bellows tapes are a wearing component- so more important what kind of paste/glue to use so that some future owner will be able to strip off and renew the tape again without unneccessary damage to the bellows paper.

I know that there are many other threads out there- but what I am hoping for in this thread is to draw together information on period materials to aid restoration/preservation of instruments which predate modern synthetic materials.

Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal