Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 12 button 4 stop one row  (Read 1848 times)

0 Members and 1 Guest are viewing this topic.

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
12 button 4 stop one row
« on: March 23, 2020, 02:08:57 PM »

I don't know if this has been brought up previously   but  does anyone make a 4 stop with 12 rather than 10 buttons i.e one at bottom end and one at top  end.   Alternatively is it feasible to add two extra buttons and associated bits to a standard hohner 4 stop

or is it just a daft question !

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: 12 button 4 stop one row
« Reply #1 on: March 23, 2020, 03:01:35 PM »

Its been done by a couple of Canadian companies adding extra buttons to a one row sized box.
Not sure if anyone has tried it with a Hohner?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: 12 button 4 stop one row
« Reply #2 on: March 23, 2020, 03:20:44 PM »

I have played a Bertrand Gaillard 11 button one row. It was one of the best accordions i have ever played. This was at St. Chartier c. 30 years ago. I have not seen one since.
Logged
Semper idem, sed non eodem modo

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: 12 button 4 stop one row
« Reply #3 on: March 23, 2020, 03:43:22 PM »

Benny McCarthy plays one Mike on his new solo album press and draw box was made 2015 according to sleeve notes note sure it's 4 voice though.
Be a lot of work George and quite destructive before the rebuild and you'd probably have to abandon the stops I'm sure it's doable lthough, if you PM me your email I've got some pics to show you, to big for on here (found that bcc# corso that I put the 96 bass in, in the bottom of cupboard I was clearing out the other day) and a 114 that I've just released the read blocks from.All the Best mory
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 12 button 4 stop one row
« Reply #4 on: March 23, 2020, 03:43:28 PM »

Accordeons Mélodie make an 11-button, 4-stop one-row.  Bobby Gardiner used to play one (https://www.youtube.com/watch?v=vTxv7v3u1NQ), and Raynald Oullet still does (https://www.youtube.com/watch?v=pR5oBIBJEFw&t=1s).  Bertrand Gaillard used to make an 11-button one row (LMMH but with only two stops) but I don't believe he does anymore.  Never heard of anyone making a 12-button one-row, though!  Andre Bouchard makes a 10+4 (actually just 10+2 with the accidentals doubled up for some peculiar reason!) and Marcel Desgagne a 10+5, but of course those are no longer one-rows...

I think it would be pretty tricky to modify an HA114 to a 12-button box; you'd have to make an entirely new keyboard and button/lever mechanism, new blocks (assuming you can get the old ones out) and there likely wouldn't be enough room for slides (and the blocks they are attached to) at that point.
Logged
C#/D player

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: 12 button 4 stop one row
« Reply #5 on: March 23, 2020, 06:09:03 PM »

Bertrand Gaillard used to make an 11-button one row (LMMH but with only two stops) but I don't believe he does anymore.
That's what I thought, but there is information in this thread to suggest that he has returned to the idea.

Quote
André Bouchard makes a 10+4 (actually just 10+2 with the accidentals doubled up for some peculiar reason!)
The idea was to keep the box down to the same size as a standard one-row, which allowed only two extra pallets. I think they are doubled up just to make them easier to reach from different areas of the keyboard. The latest models are very good indeed. But André's current average annual output is two instruments, and the estimated waiting time as of last summer was 5 years.  (:)

Quote
... and Marcel Desgagne a 10+5...

... significantly larger than a standard one-row.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: 12 button 4 stop one row
« Reply #6 on: March 23, 2020, 07:35:14 PM »

All the designs are all the pallets are in a row , so where the extra button is, I wasn’t thinking about.
I don’t see why you couldn’t add to each end of the row versus extra notes eg. D/C#.

From what I can see from my build two extra reed banks is a challenge to fit in, then you need a bigger box. Height only.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 12 button 4 stop one row
« Reply #7 on: March 23, 2020, 09:13:25 PM »

"two extra reed banks is a challenge to fit in, then you need a bigger box. Height only."

Not if you're prepared to redesign your fondos and blocks and use narrower reedplates. Liliputs have more reeds in a row per inch, or whatever. I've had several short boxes with (short) long-plate reeds as well. There are always options, it's just a matter of how far you're willing to go to be innovative!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: 12 button 4 stop one row
« Reply #8 on: March 23, 2020, 09:15:36 PM »

"two extra reed banks is a challenge to fit in, then you need a bigger box. Height only."

Not if you're prepared to redesign your fondos and blocks and use narrower reedplates. Liliputs have more reeds in a row per inch, or whatever. I've had several short boxes with (short) long-plate reeds as well. There are always options, it's just a matter of how far you're willing to go to be innovative!
The Liliput is indeed a clever bit of packaging but it would be difficult to achieve a similar outcome with reeds an octave down for a 4 stop.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: 12 button 4 stop one row
« Reply #9 on: March 23, 2020, 09:21:21 PM »

My D/G Liliput is octave tuned.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: 12 button 4 stop one row
« Reply #10 on: March 24, 2020, 12:38:47 AM »



Not if you're prepared to redesign your fondos and blocks and use narrower reed plates. It's just a matter of how far you're willing to go to be innovative!
I'm not  :P

I was thinking standard one row reeds plus a few reeds for the balance of two or more buttons.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 12 button 4 stop one row
« Reply #11 on: March 24, 2020, 03:53:03 AM »

Bertrand Gaillard used to make an 11-button one row (LMMH but with only two stops) but I don't believe he does anymore.
That's what I thought, but there is information in this thread to suggest that he has returned to the idea.

I read through the thread you linked to above, Steve, but it doesn't sound like there's any new information about Gaillard returning to one-rows...?  If anything, it sounds like there is little interest from him in doing so.  Perhaps Benny was an exception!

Does anyone have any sound clips of one?  I'd love to hear one in action!  It seems to me that the best one-rows are usually made by folks that specialize in them, rather than builders who usually make 2 or 3 row accordions and only do a one-row as something of a novelty...they usually end up missing something that's difficult to define...

Quote
André Bouchard makes a 10+4 (actually just 10+2 with the accidentals doubled up for some peculiar reason!)
Quote
The idea was to keep the box down to the same size as a standard one-row, which allowed only two extra pallets. I think they are doubled up just to make them easier to reach from different areas of the keyboard. The latest models are very good indeed. But André's current average annual output is two instruments, and the estimated waiting time as of last summer was 5 years.  (:)

I was quite excited about this model but was told by Andre that the waiting list is so long that he is no longer taking orders.  Regarding size, I completely understand his reasoning for only two additional pallets, but what I didn't understand is the idea of doubling them up so that they are easier to reach from elsewhere on the keyboard...surely they are already exactly where you want them?  I'm still fairly new to the D/C# but I find that reaching for the Cnat (for example) is already exactly where I want it and I'm not sure why it would be desirable to have the same note elsewhere...I guess if I had the option maybe I'd feel differently!

Quote
... and Marcel Desgagne a 10+5...
... significantly larger than a standard one-row.

Yes, and that's one of the reasons I chose not to go that route.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 12 button 4 stop one row
« Reply #12 on: March 24, 2020, 03:58:51 AM »

George, in partial answer to your original question, I don't think anyone makes a 12-button one-row, but there may very well be a builder willing to do so!  From my experience, Marcel Desgagne (Sag'ne accordions in Quebec) is quite willing to accommodate the requests of his clients when building a box, and seems willing to think outside convention.  Eric Martin in France is also known for making 10+ "one-row" boxes, although I don't know anything about him or his accordions.
Logged
C#/D player

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: 12 button 4 stop one row
« Reply #13 on: March 24, 2020, 10:15:17 AM »

Whilst I don't know about 1-off projects, I've played 2 Eric Martin's (Brittany) - both of them at a semi-pro level, giving them a pretty hard work-out over many years - and they were/are both robust and great players.  He speaks good English and seemed very easy to deal with when I placed my orders - once in the late 80's, then again more recently.
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: 12 button 4 stop one row
« Reply #14 on: March 25, 2020, 01:15:37 PM »

Éric Martin boxes are, for one rows at least, great boxes. I'm not as fond of his bigger boxes, but they're still good quality, it's just a matter of taste.

I think the one-row Bertrand Gaillard is just an exception, and I doubt that he would do such a box for "the ordinary" box player.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal