Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Club IIIM- 12 Bass?  (Read 938 times)

0 Members and 1 Guest are viewing this topic.

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Club IIIM- 12 Bass?
« on: April 01, 2020, 02:16:27 AM »

So, having taken a gander at the innards of my new Club IIIM’s bass side (I bought it because I wanted treble accidentals, then realised it has a gleichton, now it seems quarantine and a lack of spare reeds has caused me to convert to club system), and realised that it’s some sort of little Stradella type mechanism. I’m now a little worried as I was hoping to pop in some bass couplers/stops (thirds, low fundamental) and I really would have loved to make it a 12 bass. This seems less possible now due to the apparent reed sharing and pin based mechanism thingy. (I can silver solder and could theoretically make more rods from brass or something but still, it’s rather a different kettle of fish from the regular button-rod-lever-pallet type mechanism)
So, please enlighten me- is this possible? A 12 bass conversion for this instrument, I mean (preferably with couplers too). Subsequent important question is, is it possible for me to do it (I hope so! and if so, how?) or should I send it to someone else, and if I had to do that would it be super expensive?
Thanks
Elliot   (:)
Logged

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Club IIIM- 12 Bass?
« Reply #1 on: April 01, 2020, 10:14:13 AM »

It is possible and would make a terrific box but would be a bit of a nightmare job.   Firstly you either need to replace the bass machine with  a simpler mechanism as per Squeaky Pete's Victoria or with a wider bass machine out of a PA for instance (you would then need to get the silver solder out).   From memory the air button mech needs to be changed which is fairly straightforward in order to make room for the extra Chord reeds, and you will need to make new reedblocks and bore new holes in the soundboard.   Due to having additional Chord slots having a thirds stop then becomes possible by either sacrificing the high fundamental and fitting a traditional slide mechanism or by doing something clever with a vertical quadrant slide.  On the bright side you may get this finished before the end of the lock-down. 


Another simpler option would be to scrap a pre corona and pinch it's bass end


Or just enjoy the IIIM's lovely clubness as it is


Logged

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Club IIIM- 12 Bass?
« Reply #2 on: April 01, 2020, 10:39:42 AM »

That all sounds achievable but surrounded with a kind of tricky vibe
By replacing the bass mech with a simpler one, do you mean like the regular button-rod-lever-pallet type? That seems rather doable but also the instrument has such a nice feel with the whole stradella thingy. What sources are good for reeds and other materials at the moment- due to the unfortunate absence of CGM that seems like it might be tricky.
Is it possible to in some way modify the existing mechanism? Not to say that I’d necessarily do it but I’m just wondering.
Finally, where would I source that simpler bass mech from? Or would I make it? The hardest part here seems to be that and also the reedblocks- I’m assuming there are quite a few ways to manage that.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Club IIIM- 12 Bass?
« Reply #3 on: April 01, 2020, 12:15:06 PM »

I had come to the conclusion that it was never going to work to get 12 bass from the existing mechanism, then I had a chat with Microbot who confirmed it.
I've been messing with the Vicky as a precursor to doing a IIIM. All the mechanism will be have to replaced with gear off a club IIB or similar (the seriously horrible clubIV I've just got has the same system as IIB) and I plan to have thirdless basses and doubled fifths.
I probably won't have any stops at all, for simplicity, but there will be four note bass and four note chord.
If you do manage to cobble something to work from the existing bass, do share it as there will be lots of us waiting to dive in.
On a positive point, my new saw blade has just arrived, so I can get going on making a few extended reed blocks.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Jon Stapleton

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: Club IIIM- 12 Bass?
« Reply #4 on: April 01, 2020, 10:32:19 PM »

I know this is a IIIBS not a IIIM   but the pre corona 12 bass fits perfectly on the old IIIBS.  so I reckon worst case you could cut the soundboard out of a wrecked one of these and splice it in to the back of the IIIM.


The beauty of these is that you have the 4 octave bass but none of the random chaos of the bass machine version in the club boxes.


It can't have made financial sense to put all of that kit in to save 1 pair of chord reeds!



Logged

Elliot Warburton

  • Member
  • *
  • Offline Offline
  • Posts: 34
Re: Club IIIM- 12 Bass?
« Reply #5 on: April 01, 2020, 11:48:40 PM »

Yeah, the only problem there is finding all the parts, or a junky box to use, or whatever. Starting to regret having bought a IIIM instead of one that's more easily convert-able now...  :P
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Club IIIM- 12 Bass?
« Reply #6 on: April 02, 2020, 02:28:33 PM »

https://buttonbox.org.uk/index.php/topic,624.0.html
Thought you might be interested in this Club 3m 60bass conversion I put on Buttonbox.
For this I used a delicia 60 bass mechanism which was a very tight fit.
The club2b with 40+Hohner basses turned out much more "playable" and lighter(4.7k).
                 Good luck!   John
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal