Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: couplers...  (Read 5497 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
couplers...
« on: September 26, 2009, 03:36:51 PM »

does it realy matter if you have loads of couplers on your box? i have 2 on my soprani but never use one., i have a chance to buy a realy good box with no couplers and was just wandering if people saw them as a gimmick or a realy usefull tool to have on your box?
Logged

HallelujahAl

  • Guest
Re: couplers...
« Reply #1 on: September 26, 2009, 05:06:59 PM »

Obviously the more couplers one has the more variety you get out the box in terms of sound. It's nice to have a choice of sounds - but in my limited experience not essential. My trichord doesn't have any couplers, my D/G Primo doesn't, my Erica C/F doesn't and I don't care or miss something that was never there in the first place. However, both my piano accordions have loads of couplers, 3 on the small 48 bass, and 12 on the big box (120 bass), and I wouldn't be without them now. This is no help I'm sure to you  (:)
AL
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: couplers...
« Reply #2 on: September 26, 2009, 11:31:16 PM »

agree with Al. couplers stops or whatever you want to call them are not essential & indeed the 12 or so on many piano acordions are  unnecesary, offering frequently unused combinations of reeds.  The Shand Morino manages perfectly well with 5!  .It also depends on the number of reeds (voices) in the box. with a standard 2 voice eg pokerwork the only possible combination would be 1 or 2 reeds!!, with 3 voice musette (MMM)  its hardly worthwhile but again you could have the facility to play the middle reed on its own.  £ voice with low set of reeds its more useful to be able to add or remove the low set.  4 voice provides more possibilities, either concert pitch high or concert pitch low or both togethr (dry sound) 3 voice musette(MMM)  or all 4 together. ( this I think is the Shand MOrino set up. Anything above this is splitting hairs.
Of course you could haave stops sprouting out of the top of the box , one for each set of reeds & you can then use any combination.  An advantage of cuplers as opposed to stops is that they can be opprated 'on the hoof' to good effect.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: couplers...
« Reply #3 on: September 27, 2009, 12:35:58 AM »

The simpler the better! Couplers and stops add complexity and possible air leaks to a box. I remember reading that some builders of 1-row boxes like Messervier preferred not to install stops unless requested by the client, hence the fake stop knobs at the top of many boxes.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: couplers...
« Reply #4 on: September 27, 2009, 09:50:40 PM »

I've always considered that couplers are preferable to stops, as you can press them whilst playing. I don't know why we don't have them, apart from the obvious size and weight issues. I'd like to be able to select between single voice, both high and low and double voice, i.e. 100, 001, 101 and 111 (treble, musette, bass, if that makes any sense).
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: couplers...
« Reply #5 on: September 28, 2009, 12:25:05 AM »

I'd like to be able to select between single voice, both high and low and double voice, i.e. 100, 001, 101 and 111 (treble, musette, bass, if that makes any sense).
The most used terminology for accordion reeds nowadays is to use L, M, H (for Low, Middle and High) reeds. An older usage, analogous to organ pipes, uses 16' for L, 8' for M, 4' for H. Another variation is Bassoon (L), Oboe (M), Piccolo (H).

Where there's more than one M reed, they're usually tuned apart, to varying degrees.

A single voice box would usually have an M reed.
A 2-voice box would have MM. (usually called tremolo tuning)
A 3-voice box would have LMM (tremolo), or MMM (musette), (or possibly LMH, but I think that's unusual).
A 4-voice box would have LMMM (musette tuned), or LMMH (double-octave or 'straight' tuned)
A 5-voice box would have LMMMH

My 4-voice, 9-coupler (2 repeats) LMMM Paolo Soprani gives the following combinations:
L, M, MM, MMM, LMMM, LM, LMM. The L and M couplers are repeated.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: couplers...
« Reply #6 on: September 28, 2009, 12:26:57 AM »

I'd like to be able to select between single voice, both high and low and double voice, i.e. 100, 001, 101 and 111 (treble, musette, bass, if that makes any sense).
The most used terminology for accordion reeds nowadays is to use L, M, H (for Low, Middle and High) reeds. An older usage, analogous to organ pipes, uses 16' for L, 8' for M, 4' for H. Another variation is Bassoon (L), Oboe (M), Piccolo (H).

Where there's more than one M reed, they're usually tuned apart, to varying degrees.

A single voice box would usually have an M reed.
A 2-voice box would have MM. (usually called tremolo tuning)
A 3-voice box would have LMM (tremolo), or MMM (musette), (or possibly LMH, but I think that's unusual).
A 4-voice box would have LMMM (musette tuned), or LMMH (double-octave or 'straight' tuned)
A 5-voice box would have LMMMH

My 4-voice, 9-coupler (2 repeats) LMMM Paolo Soprani gives the following combinations:
L, M, MM, MMM, LMMM, LM, LMM. The L and M couplers are repeated.


Ah I see, that's interesting. In that case I would like the options of L, M, MM, LMM and LM. MMM sets my teeth on edge I'm afraid  :|bl
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: couplers...
« Reply #7 on: September 28, 2009, 01:03:08 PM »

IMHO, Stops. Or Sliders. Not Couplers.

As I expounded in another thread, a 'modern' front mounted coupler mechanism can have a tendency to act as a mute. If there's an aluminium slider bridge stuck in front of your pallettes, it's going to have some effect on the sound coming out. However, certain boxes - examples being old 2 coupler Paolo Sopranis, Shand Morinos, or some Corona IIIRs - use different, direct linkage mechanisms that avoid using a front mounted slider bridge. Likewise, boxes with sliders on the rear of the keyboard avoid this problem.

MMM sets my teeth on edge I'm afraid  :|bl

Aha, but I expect you've only heard MMM in its default, no holds barred, plaster cracking Scottish Musette incarnation... tone it down to two demi swing reeds with the merest soupçon of dampness on top, and you get this lush, to die for, 'buttery' sound...  8) like this...

Ed J
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: couplers...
« Reply #8 on: September 28, 2009, 01:20:36 PM »

IMHO, Stops. Or Sliders. Not Couplers.

As I expounded in another thread, a 'modern' front mounted coupler mechanism can have a tendency to act as a mute. If there's an aluminium slider bridge stuck in front of your pallettes, it's going to have some effect on the sound coming out. However, certain boxes - examples being old 2 coupler Paolo Sopranis, Shand Morinos, or some Corona IIIRs - use different, direct linkage mechanisms that avoid using a front mounted slider bridge. Likewise, boxes with sliders on the rear of the keyboard avoid this problem.

MMM sets my teeth on edge I'm afraid  :|bl

Aha, but I expect you've only heard MMM in its default, no holds barred, plaster cracking Scottish Musette incarnation... tone it down to two demi swing reeds with the merest soupçon of dampness on top, and you get this lush, to die for, 'buttery' sound...  8) like this...

Ed J

All right, I take it all back :P

And obviously if couplers dampen the sound I want none of them. Sliders would do just as well and are less unattractive, if less easy to use.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: couplers...
« Reply #9 on: September 28, 2009, 01:28:35 PM »

My Handry has little levers behind the keyboard to change the reeds in and out.

This arrangement allows you to change the sound of the box with a quick bit of thumb action. I must admit I think it is a really good idea, and can't understand why it isn't seen a bit more?
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: couplers...
« Reply #10 on: September 28, 2009, 01:43:49 PM »

My Handry has little levers behind the keyboard to change the reeds in and out.

This arrangement allows you to change the sound of the box with a quick bit of thumb action. I must admit I think it is a really good idea, and can't understand why it isn't seen a bit more?

Probably because a lot of people jam their thumb on the edge and so changing reed banks would require a change of posture that would interrupt playing even more than couplers. Also because they would be more expensive than stops and (it seems to me) would be more liable to damage, being semi-exposed.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: couplers...
« Reply #11 on: September 28, 2009, 02:14:00 PM »

My Handry has little levers behind the keyboard to change the reeds in and out.

This arrangement allows you to change the sound of the box with a quick bit of thumb action. I must admit I think it is a really good idea, and can't understand why it isn't seen a bit more?

Probably because a lot of people jam their thumb on the edge and so changing reed banks would require a change of posture that would interrupt playing even more than couplers. Also because they would be more expensive than stops and (it seems to me) would be more liable to damage, being semi-exposed.

Hmm, possibly. Although as far as damage is concerned, I have had the box the best part of 20 years and (some years ago now) used to play out fairly frequently and they have come though unscathed. The exposed 'mechanism' is very flat and you'd have to do something fairly drastic to damage it. I guess it might take some people a little bit of practice to shift their thumb but surely less than moving the whole hand to pull up a stop, and possibly more than interrupting the flow of the fingers to use a coupler (???)

Anyway, I thought it worth mentioning because it is a 'third way' - neither stops nor couplers.
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: couplers...
« Reply #12 on: September 28, 2009, 04:29:10 PM »

My Handry has little levers behind the keyboard to change the reeds in and out.

This arrangement allows you to change the sound of the box with a quick bit of thumb action. I must admit I think it is a really good idea, and can't understand why it isn't seen a bit more?

Probably because a lot of people jam their thumb on the edge and so changing reed banks would require a change of posture that would interrupt playing even more than couplers. Also because they would be more expensive than stops and (it seems to me) would be more liable to damage, being semi-exposed.

Hmm, possibly. Although as far as damage is concerned, I have had the box the best part of 20 years and (some years ago now) used to play out fairly frequently and they have come though unscathed. The exposed 'mechanism' is very flat and you'd have to do something fairly drastic to damage it. I guess it might take some people a little bit of practice to shift their thumb but surely less than moving the whole hand to pull up a stop, and possibly more than interrupting the flow of the fingers to use a coupler (???)

Anyway, I thought it worth mentioning because it is a 'third way' - neither stops nor couplers.

Yes, like I said... what I call sliders... Frans Van der Aa uses this arrangement (NB - the reed length numbers are not actually written on the box!), where everything but the switch itself is enclosed... which looks more understated, and is not very snaggable at all...

Then there is what Bertrand Gaillard uses - sliders on the top of the R/H casework. And Maugein's variation - sliders behind the keyboard at the chin end - like this, and this (note also the interlinked accidental mechanisms on this machine, and the 'reverse sprung' row mechanics).

Ed J
« Last Edit: September 28, 2009, 07:48:01 PM by EeeJay »
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: couplers...
« Reply #13 on: September 29, 2009, 08:11:28 AM »

I like the possibilities afforded by the LMM on my Hohner Club IIIM
Logged

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: couplers...
« Reply #14 on: October 06, 2009, 01:13:30 PM »

Probably because a lot of people jam their thumb on the edge and so changing reed banks would require a change of posture that would interrupt playing even more than couplers. Also because they would be more expensive than stops and (it seems to me) would be more liable to damage, being semi-exposed.

On the few Castagnaris I've tried with switches behind the keyboard another problem (at least for many "English" players) is the switches seem to be positioned for playing in the upper octave and require a bit of hand contortion to operate successfully.  I think that what ever system you have you (or at least I) need to practice a lot to get smooth changes of reed selection, some might be easier to master or impossible, but I doubt anyone could do it straight from the off.

Logged
Ciao Bellow

Darren

Nick Hudis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 334
  • Loffet Pro 18, Castagnari Casta
    • Themassageman
Re: couplers...
« Reply #15 on: October 07, 2009, 01:13:19 PM »

Couplers really come into their own on a LMM box or bigger.

My Loffet  has levers behind the keyboard which work very nicely.  I have a choice of M, MM(swing tuned) LM and LMM.  What I find is that some tunes go better with different combinations.  MM is definitely my standard, but some tunes really need the beefier LM sound particularly if their range is high.  M is a nice pure, quiet concertina sort of sound, nice for slow airs etc.  I've never really used LMM.

I wouldn't be without the the bass couplers.  I tend to leave the low bass switched off and most often switch the thirds off too.  But some tunes say Stephane Delicq's lovely waltzes just odd without the thirds.

So on the whole I am a great fan of couplers.  All depends on your playing style and repetoire.
 
Logged
Nick
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal