Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Lightest 3 Rows  (Read 5011 times)

0 Members and 1 Guest are viewing this topic.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Lightest 3 Rows
« on: September 26, 2009, 04:15:31 PM »

What are the lightest weight 3 row melodeons you are aware of, and @ how much do they weigh compared to let's say a Pokerwork?

I think not having the 3rd row makes some things harder not easier, and it would be nice to have the third row to smooth things out. Especially avoiding forced bellows reversals.  The expense is what will probably stop me from aquiring as well as having second thoughts about added weight.

I also realize some people might suggest I try a B/C system to get more chromaticism. I play chromatic harmonica, so it is essentially the same thing. The other row is your button on the harmonica. I would definitelty prefer to borrow/rent a B/C before I buy to be sure though.
« Last Edit: September 26, 2009, 04:23:28 PM by stevejay »
Logged

graememackay

  • Graeme Mackay
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 596
  • B/C/C# Pleeeeeeeeeeeeeze
    • Graeme's homepage
Re: Lightest 3 Rows
« Reply #1 on: September 26, 2009, 04:36:03 PM »

If you already play the Chromatic Harmonica then go for the B/C.

It's not til March, but my workshop could pose as a try before you buy thing.  We have accordions available for you to borrow for the weekend, shouldn't be too hard to find a double ray for you to use.
Logged
Black Shand Morino

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Lightest 3 Rows
« Reply #2 on: September 26, 2009, 05:00:53 PM »

Actually it IS different...but similar lol. This is what Irish harmonica players obsess over:

""You don't need to "reverse" reedplates around to create a B/C or C#/D chromatic (or F#/G, as Farrell used to sell for Irish music). However, you may need to swap reedplates from two instruments, or retune plates.

For instance, to make a B/C, you could take a Bb chromatic (with Bb and B plates) and a C chromatic (with C and C# plates). Remove the C# plate from the C harp and replace it with the B plate from the Bb chromatic. You now have a harp where the note goes down a semitone when you press the slide button. If you prefer that the note go up (from B to C), just flip the slide over.

To make a C#/D, take a D chromatic (which is a low D) and a Tenor C chromatic, and use the C# plate from the C-harp to replace the D# plate on the D-harp. Again, if you prefer that the note go up instead of down when the slide is pressed, you need to flip the slider.

C#/D plays better chordally in the key of D than B/C, but B/C has a huge advantage for smooth scales and ornaments, as almost every note in the D major scale has a neighboring scale note on the same breath, making all the neighboring note ornaments possible  (cuts, rolls, triplets, crans, etc.). The same is true for the keys of G and A. The keys of D, A, and G play on a B/C the same way the keys of Eb, Bb, and Ab play on a C/C# chromatic, with very smooth scales.

One problem with a standard B/C is that it's too high pitched, especially if you're playing fiddle tunes. You need something that goes down to G below middle C. If you take an E harmonica and tune E up to F#, and the rest of the blow notes and draw notes as of your creating a Low B chromatic that starts on Hole 3, you'll have a B/C instrument that matches fiddle range.

A further refinement is to get rid of the duplicated blow note, like C next to C. Tune the first C down 3 semitones (to A), and do the same thing for the corresponding notes on the other reedplate, and you'll add two more "choice notes" (notes that can be played as blow or draw) and make your scales even smoother."

Winslow
Logged

HallelujahAl

  • Guest
Re: Lightest 3 Rows
« Reply #3 on: September 26, 2009, 05:01:46 PM »

My Hohner Trichord II BCC# with 12 button strad bass (F-E fundamentals + chords) weighs in at a fraction under 4 kgs - in fact it's probably closer to 3.5kgs. I was amazed when I put it on the scales just now.

Do we have 'gobsmacked' emote?
AL
Logged

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Lightest 3 Rows
« Reply #4 on: September 26, 2009, 05:05:42 PM »

7.7 Pounds, not bad at all!

But you know, I haven't taken delivery of my D/G yet, and there's a lot I don't know about what can be done with a two row. I have a lot of music to practice with my Mally book/cd, I better see how this goes first...

I'm happy about the Pokerwork, it's all good ;D
« Last Edit: September 26, 2009, 05:09:54 PM by stevejay »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Lightest 3 Rows
« Reply #5 on: September 26, 2009, 05:25:22 PM »

Light weight 3 row

Hohner Corona

or Van Der AA Condor
« Last Edit: September 26, 2009, 10:37:15 PM by melodeon »
Logged

ganderbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 734
  • Melodeons from Brittany, Italy, Germany* and Leeds
    • www.choughedtobits.co.uk
Re: Lightest 3 Rows
« Reply #6 on: September 26, 2009, 05:28:21 PM »

What about a Benny? It's supposed to weigh 3.1 kg (although I think that is perhaps a bit optimistic).
Logged
Pauline from Cornwall

*  including a customised Hohner Club from Cornwall (and very nice it is too!).

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Lightest 3 Rows
« Reply #7 on: September 26, 2009, 05:44:20 PM »

Do we have 'gobsmacked' emote? AL

Nah. Oakwood is 3.685g  2 voice, 12 bass  :|glug

   But I think the Benny will win. Seriously compact

     And an "Italian Job" .. they have better Godfathers 8)
« Last Edit: September 26, 2009, 05:55:29 PM by chrisryall »
Logged
  _       _    _      _ 

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Lightest 3 Rows
« Reply #8 on: September 26, 2009, 05:51:25 PM »

The Corona II Classic (and similar boxes like the Compadre and even the Panther) weighs 4kg and the Corona III Extreme (and Rey del Vallenato) does 5.7kg according to the specs found on the Hohner web site.

The older Coronas could be a bit heavier since there seems to be more composite (read: plastics) in the current models. I find my 1970's Corona II very easy to handle even for long playing sessions, weight has never been an issue forf me.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Graham Collicutt

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 107
Re: Lightest 3 Rows
« Reply #9 on: September 26, 2009, 07:06:23 PM »

Actually it IS different...but similar lol. This is what Irish harmonica players obsess over:

""You don't need to "reverse" reedplates around to create a B/C or C#/D chromatic (or F#/G, as Farrell used to sell for Irish music). However, you may need to swap reedplates from two instruments, or retune plates.

For instance, to make a B/C, you could take a Bb chromatic (with Bb and B plates) and a C chromatic (with C and C# plates). Remove the C# plate from the C harp and replace it with the B plate from the Bb chromatic. You now have a harp where the note goes down a semitone when you press the slide button. If you prefer that the note go up (from B to C), just flip the slide over.

To make a C#/D, take a D chromatic (which is a low D) and a Tenor C chromatic, and use the C# plate from the C-harp to replace the D# plate on the D-harp. Again, if you prefer that the note go up instead of down when the slide is pressed, you need to flip the slider.

C#/D plays better chordally in the key of D than B/C, but B/C has a huge advantage for smooth scales and ornaments, as almost every note in the D major scale has a neighboring scale note on the same breath, making all the neighboring note ornaments possible  (cuts, rolls, triplets, crans, etc.). The same is true for the keys of G and A. The keys of D, A, and G play on a B/C the same way the keys of Eb, Bb, and Ab play on a C/C# chromatic, with very smooth scales.

One problem with a standard B/C is that it's too high pitched, especially if you're playing fiddle tunes. You need something that goes down to G below middle C. If you take an E harmonica and tune E up to F#, and the rest of the blow notes and draw notes as of your creating a Low B chromatic that starts on Hole 3, you'll have a B/C instrument that matches fiddle range.

A further refinement is to get rid of the duplicated blow note, like C next to C. Tune the first C down 3 semitones (to A), and do the same thing for the corresponding notes on the other reedplate, and you'll add two more "choice notes" (notes that can be played as blow or draw) and make your scales even smoother."

Winslow

You can go to Seydel site ( http://www.seydel1847.de/epages/Seydel.sf/en_GB/?ObjectPath=/Shops/Seydel )and order custom layout or lots of semi standard layouts. I haven't tried them, yet!

Graham
Logged

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Lightest 3 Rows
« Reply #10 on: September 26, 2009, 08:13:08 PM »

Thanks Graham,

I mostly use diatonics now, wouldn't mind getting a lee oskar minor and harmonic minor at some point.
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Lightest 3 Rows
« Reply #11 on: September 28, 2009, 02:09:53 PM »

The Castagnari Benny was remodelled about four years ago. I have both an old-style and a new-style Benny and have just weighed them. The old-style one weighs 3.7 kilos and the new-style one weighs 4.6 kilos. Both weights are inclusive of two padded leather straps.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

ganderbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 734
  • Melodeons from Brittany, Italy, Germany* and Leeds
    • www.choughedtobits.co.uk
Re: Lightest 3 Rows
« Reply #12 on: September 28, 2009, 02:57:36 PM »

I thought 3.1kg was a bit optimistic!
Logged
Pauline from Cornwall

*  including a customised Hohner Club from Cornwall (and very nice it is too!).

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Lightest 3 Rows
« Reply #13 on: September 28, 2009, 06:37:24 PM »

The Castagnari Benny was remodelled about four years ago. I have both an old-style and a new-style Benny and have just weighed them. The old-style one weighs 3.7 kilos and the new-style one weighs 4.6 kilos. Both weights are inclusive of two padded leather straps.


 ;D This put my Oakwood 3.685kg "as weighed on kitchen scale" in the lead. Where's my rosette?
Logged
  _       _    _      _ 

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Lightest 3 Rows
« Reply #14 on: September 28, 2009, 09:45:12 PM »

Bob Ellis

So you have the old and "new" Benny

I will assume the new opne has the larger chassis and additional bass reeds

Can you tell me what the button spacing is  center to center on the treble side...

Do you find it "cramped"

How do you get along with the 2 reed treble side
and is yours G/C acc or "other

Do you find the tone "full" enopugh with the two reeds and any reget you don't have a full 3 reed treble...
ie why not a HANDRY ?

Thanks
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Lightest 3 Rows
« Reply #15 on: September 30, 2009, 12:07:35 AM »

Bob Ellis

So you have the old and "new" Benny

I will assume the new opne has the larger chassis and additional bass reeds

Can you tell me what the button spacing is  center to center on the treble side...

Do you find it "cramped"

How do you get along with the 2 reed treble side
and is yours G/C acc or "other

Do you find the tone "full" enopugh with the two reeds and any reget you don't have a full 3 reed treble...
ie why not a HANDRY ?

Thanks
To answer your questions in order:
Yes, the new one has "the larger chassis and additional bass reeds".
The button spacing on the treble side is about 19mm centre to centre.
No, I don't find it cramped: it is a lovely box to play - light and responsive.
The two-reed treble side is fine: a nice tone and sufficient volume to be able to hear myself play even in loud sessions.
The outer rows are D and G (with low notes and fourth button key note to provide three full octaves in each key); the inner row comprises accidentals and reversals of C, C#, D and E.
Tone is a very personal thing, but I like the tone of the new Benny very much (although the old one is a bit thin) and I use the new Benny extensively in sessions and for Morris (others have liked the tone and the layout of the notes sufficiently, having played it, to order exact replicas from Castagnari). I don't regret not having bought a three-voice box.
I haven't played a Handry since before I bought the "new" Benny nearly four years ago, but I don't remember the Handry as having a better tone and it was certainly heavier. For me, weight is a consideration, since I suffer from spinal arthritis: playing a heavy box standing up all day on a Morris tour or at a festival is very uncomfortable, but I have little problem in that respect with the Benny.
Hope this helps.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Lightest 3 Rows
« Reply #16 on: October 01, 2009, 08:01:11 PM »

Thanks Bob

19mm center to center is  wider than the original Benny..

Matter of fact it is the spacing often used by Cajun accordeon builders... 20 mm being the other.



Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal