Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner pokerwork losing air  (Read 786 times)

0 Members and 1 Guest are viewing this topic.

Robin Parson

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
  • Slowly going MAD...
Hohner pokerwork losing air
« on: April 14, 2020, 12:34:52 AM »

Hello! I have a question you may be able to help with - I have an old hohner double ray that is in need of a bit of a fix up. Currently, the inside row is fine but the outside row loses air very quickly. I've not experienced this before with one of my boxes- does anyone know what might be the cause?

A couple more details -
- the bellows are tight with no leaks
- the box plays fine on the inside row
- when the buttons on the outside row are pressed the box runs out of air very quickly, and the reeds make very little sound

thanks!
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Hohner pokerwork losing air
« Reply #1 on: April 14, 2020, 12:43:38 AM »

Hello! I have a question you may be able to help with - I have an old hohner double ray that is in need of a bit of a fix up. Currently, the inside row is fine but the outside row loses air very quickly. I've not experienced this before with one of my boxes- does anyone know what might be the cause?

A couple more details -
- the bellows are tight with no leaks
- the box plays fine on the inside row
- when the buttons on the outside row are pressed the box runs out of air very quickly, and the reeds make very little sound

thanks!

Sounds as if the reed block for the offending row might be loose.  Pull the pins and look inside.  Check the "keeper" holding the reed block and see if it's loose.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Hohner pokerwork losing air
« Reply #2 on: April 14, 2020, 05:10:55 PM »

Also, check that the base of the reed block is square since they tend to warp with moisture and drying out unevenly. Lester has a fix in one of his videos but I didn't see how he repaired the felt after sanding to square it off.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner pokerwork losing air
« Reply #3 on: April 14, 2020, 05:19:12 PM »

Also, check that the base of the reed block is square since they tend to warp with moisture and drying out unevenly. Lester has a fix in one of his videos but I didn't see how he repaired the felt after sanding to square it off.


Most probably it was type that has the gasket on the fondo so no gasket on the block.

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Hohner pokerwork losing air
« Reply #4 on: April 14, 2020, 05:26:17 PM »

Also, check that the base of the reed block is square since they tend to warp with moisture and drying out unevenly. Lester has a fix in one of his videos but I didn't see how he repaired the felt after sanding to square it off.


Most probably it was type that has the gasket on the fondo so no gasket on the block.

Interesting, haven't come across those yet. Makes sense.
Logged

Robin Parson

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
  • Slowly going MAD...
Re: Hohner pokerwork losing air
« Reply #5 on: April 14, 2020, 06:47:39 PM »

Thanks everybody~ I really appreciate the advice! I'll take a look tomorrow and let you know how it goes
Logged

Robin Parson

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
  • Slowly going MAD...
Re: Hohner pokerwork losing air
« Reply #6 on: April 16, 2020, 08:18:11 AM »

@Dick Rees- that was the exact problem!

One of the pins that holds down the reed block had come loose, so the block wasn't sitting flush with the wood.

Thanks everybody! 👍👍
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal