Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner reed response.  (Read 748 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Hohner reed response.
« on: April 14, 2020, 09:41:20 AM »

I'm messing about with a scruffy Club IIIM and a lot of the reeds need serious work. Pretty rusty and a long way out of tune.
After a bit of cleaning and general fettling, plus a bit of retuning, most are sounding great with an instant response on the tuning table. However some seem very slightly muted and some although reaching the same volume and clarity as the good ones take a moment to get there.
I can adjust the gap and have got used to straightening the tongue in the slot but this slowness of response is beyond me.
I've got time to try various suggestions.
Any bright ideas?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner reed response.
« Reply #1 on: April 14, 2020, 09:43:44 AM »

What condition are the valves in?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner reed response.
« Reply #2 on: April 14, 2020, 09:50:45 AM »

All the valves have been stripped off. I've tried laying on a valve to blank the other slot while on the table but it makes no difference.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner reed response.
« Reply #3 on: April 14, 2020, 10:09:49 AM »

I think you have to stick the valves in place to properly assess the reed response.

It's also worth checking the edges of the reed tongue for rust and dirt.  Usually it will scrape off with a scalpel.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner reed response.
« Reply #4 on: April 14, 2020, 10:28:03 AM »

That's funny, I've just looked on here after returning from a check-up CT scan, to find the very same question I was wondering whether I should ring and ask Theo for advice about.
Mine is regards to changing the dodgy reeds in my D/G Liliput. (He knows the ones I mean!) The problem is that I cannot get the volume to balance on some of the pairs.
One or two aren't sounding at exactly the same time, but that's probably a gap thing which I can probably fix by messing about with them, but I'm a bit stumped with the volume thing. I've cleaned the reeds as best as I can, including the edges, and the valves are either new now, or when I converted it just last year. All the airways seem to be lined up and clear, too.
Any other ideas?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner reed response.
« Reply #5 on: April 14, 2020, 11:05:37 AM »

Edward, have you got rid of all the solder you put on the middle of the reed to raise the pitch?  That kills the volume.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner reed response.
« Reply #6 on: April 14, 2020, 12:23:19 PM »

That's why I'm changing those reeds to brand new (well, you know what I mean) "H" reeds. I've learned my lesson with solder, thank you!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal