Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stop slider material  (Read 1599 times)

0 Members and 1 Guest are viewing this topic.

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Stop slider material
« on: April 17, 2020, 04:54:42 PM »

I’m beginning down the road of building my own box from scratch for the first time. I’ve had some soundboards and stop sliders cut by a laser cutting shop, and he sent me some stop samples in acrylic-like material. I had intended to use wood as the actual material for the sliders as I’ve already a few boxes built like that and can reference them for sound, but would acrylic be suitable as well? I’ve seen metal used quite frequently, but it’s not in my plans right now.

I know soundboard/block material vs. sound output has been debated much before, I’m just concerned on any negative effect the acrylic material might have on sound/resonance, if any.
Logged
Too many accordions, help!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stop slider material
« Reply #1 on: April 17, 2020, 04:57:07 PM »

I'd more concerned about the acrylic being more brittle than wood and the possibility of breaks from the corners of the holes.  Aircraft ply is hard to beat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Stop slider material
« Reply #2 on: April 17, 2020, 05:20:14 PM »

I made some slides out of this: https://www.amazon.co.uk/gp/product/B007JUSHG8 - some very flexible PETG clear plastic that I had. It's really quite soft, you can cut it with scissors and (I believe) heat shape it if you wanted. I chose this because I was making the slides by hand for an existing box where nothing lined up, and wanted to be able to see through it to figure out where the right place for the holes would be & worse case I could make them and then transfer the pattern onto eg ply.

The exact properties of the plastic in question are probably important, as Theo says, if it's rigid I would worry about it tolerating any in-exact measurements or hitches and possibly snapping around the edge of one of the hole cut outs. On my box, I didn't really notice any issues with impact on sound etc, but, I didn't conduct much in the way of testing besides 'yes this is working and that makes me very happy'. Depending on your slide design, you could perhaps try both materials, although I can't see there being much reason not to use ply. I guess maybe because it'll smell of burnt wood? It does dissipate... eventually... my main box features a lot of laser cut components, including the slides.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Stop slider material
« Reply #3 on: April 17, 2020, 05:37:06 PM »

most of the boxes i have the sliders are aluminium, 3 paolo sopranis of different manufacture. They are built with the sliders inside the blocks. I also have a swiss tell/ spahni with brass sliders underneath the blocks, they are really thin.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stop slider material
« Reply #4 on: April 17, 2020, 06:40:43 PM »

I use aircraft ply GL1, it gives a very clean cut.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Stop slider material
« Reply #5 on: April 17, 2020, 07:51:19 PM »

Not sure if you mentioned it, what kind of box?
Anyway, what are you going to attach acrylic slider to ? Wood to wood is pretty straightforward.

Although I would say when I was gluing my wooden slides on my project to a cherry block that the stop was attached to, I got a better bond by roughing up the slider, which was aircraft ply.
The first time I did it, it broke away from the slider leaving all the glue on the cherry block ( this happen as I was running the stop shanks into the blocks) after roughing up the surface of the slide and sanding the block to remove dried glue and redoing it adhered well.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stop slider material
« Reply #6 on: April 17, 2020, 09:49:34 PM »

Emmanuel Pariselle advises using Araldite due to the shear force between block and slider, so I use that.
I've seen wood glue joints fail but never Araldite, particularly if you dot the surfaces with shallow 1mm holes.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Stop slider material
« Reply #7 on: April 17, 2020, 10:37:43 PM »

Emmanuel Pariselle advises using Araldite due to the shear force between block and slider, so I use that.
I've seen wood glue joints fail but never Araldite, particularly if you dot the surfaces with shallow 1mm holes.
Thanks ,
Good to know , it is a point of failure if not done right , trouble with wood glue is you can only apply so much without sticking to parts you don’t want to stick to (with squeeze out).
Mine held great once I roughen the slide, probably similar to making dimples:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Stop slider material
« Reply #8 on: April 18, 2020, 07:44:30 AM »

I use aircraft ply GL1, it gives a very clean cut.
Rees.... I’ve tried searching for GL1 ply (on eBay), but draw a blank. Does it have another label? Or....where do you get your ply?

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stop slider material
« Reply #9 on: April 18, 2020, 09:32:12 AM »

I haven't bought any for ages as a 1200 x 1200mm sheet goes a long way.
You won't find it on eBay.
I now remember that GL1 is no longer readily available so I changed to SATCo which meets the GL1 spec.
I think I got it from this place https://www.aircraftplywoodandtimber.co.uk/birch-plywood.html

How much do you need? I could send some. I have 3mm and 1.5mm.
« Last Edit: April 18, 2020, 09:39:19 AM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stop slider material
« Reply #10 on: April 18, 2020, 10:15:25 AM »

If making round holes you will need a Forstner bit of the correct diameter.
Drill a small pilot hole first. Go halfway through with the Forstner then flip the workpiece over and finish the hole from the other side.
This will avoid any breakout.
Rectangular holes will require a different technique.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: Stop slider material
« Reply #11 on: April 20, 2020, 01:53:04 PM »

hi i have made a few sliders out of sycamore epoxy glue on the block and screws x2 through the slider in to the block they have not failed yet
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Stop slider material
« Reply #12 on: April 20, 2020, 02:48:43 PM »

I have some in stock if you want some,1.5mm thick.
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Stop slider material
« Reply #13 on: April 21, 2020, 02:26:59 AM »

Lexan would make bombproof sliders.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal