Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Isolation project  (Read 1472 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Isolation project
« on: April 17, 2020, 07:29:23 PM »

Hi all,
Current project in progress made from an ikea magazine file.
Bc 16 key 3 voice.
Flat mounted piano accordion reeds, will be LMM all flat mounted.
I have stolen the buttons from an old paolo soprani at present, not got the material to make any new buttons.
The bass end has a hardboard soundboard at present, no more ikea plywood available.
Bellows are borrowed from a lilliput until i make or borrow something else.


Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Isolation project
« Reply #1 on: April 21, 2020, 02:24:47 AM »

Nice!

My shop (storefront) is closed but I have buttons and ply if you are in the US.
I am currently upgrading a 20 year old 3 row anglo concertina as a home project.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Isolation project
« Reply #2 on: April 22, 2020, 03:57:59 PM »

Hi Kimric,

I want to make the buttons, but have not got to that stage yet. Thanks for the offer though.
The buttons on screws are useful to be able to adjust height. Not sure about making a fingerboard, i may leave it without one.

I am in the uk, sending any parts at present seems non essential so i will make do with what is in the workshop until we are out the other side.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Isolation project
« Reply #3 on: April 22, 2020, 04:28:14 PM »

Interesting project. I can see two banks of flat mounted reeds, but where will you put the third set?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Isolation project
« Reply #4 on: April 22, 2020, 05:28:49 PM »

Interesting project. I can see two banks of flat mounted reeds, but where will you put the third set?
I think it's going to be a chimney.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Isolation project
« Reply #5 on: April 25, 2020, 10:40:42 AM »

Yes lower set higher up. I will finish the 2 voice first, with the size of bellows there may not be enough air for a low set.
It is taking a long time to cut the reeds down to make them fit, a slow process.

Just thinking about the l reeds if i get there, Some of the reeds i have- 3 sets of paolo soprani mml, one from a continental button, 2 sets from piano accordions have the L reeds the same length as the M reeds but an octave lower. Is this normal? So for the same note the L reeds are significantly shorter than the M reeds.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Isolation project
« Reply #6 on: April 25, 2020, 10:49:14 AM »

"It is taking a long time to cut the reeds down to make them fit, a slow process.

Just thinking about the l reeds if i get there, Some of the reeds i have- 3 sets of paolo soprani mml, one from a continental button, 2 sets from piano accordions have the L reeds the same length as the M reeds but an octave lower. Is this normal? So for the same note the L reeds are significantly shorter than the M reeds."

No matter how long this daft isolation carry-on continues; with a stock of PA reeds and a bit of imagination, there's no limit to the amount of fun to be had!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Isolation project
« Reply #7 on: April 25, 2020, 01:34:26 PM »

Cool!
Are you going to install the reeds with the tip of the reed close to hole as pictured?
Usually the riveted end goes close to the hole unless it is a small reed thats not sounding properly.
On the box I just did I didn't have to flip any of the reeds.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Isolation project
« Reply #8 on: April 25, 2020, 03:46:04 PM »

Yes they will be tip above the hole, i tested some out both ways and the tip to the hole sounds best to my ear.
One i did before with tip at the hole had to have a pin in each void to stop the valves getting to the hole, but havent had this problem so far with this one. I have the bottom 5 buttons reeded at present.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Isolation project
« Reply #9 on: April 25, 2020, 04:18:29 PM »

How are you going to tune the reeds? There doesn't appear to be much room for tools and reed lifters with the reed tongue tips so close to the central vertical walls.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal