Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bent fondo  (Read 737 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Bent fondo
« on: April 18, 2020, 10:14:18 AM »

I'm pottering through refurbing a club IIIM and noticed that the back of the Fondo is a bit grubby in the middle. It's covered completely in a gasket like fake suede.
It turns out the Fondo which is made of aluminium has a slight dish in it and the discolouration is due to air leaking through. A paper shim could easily be pulled out from under two of the reed blocks.
I presume trying to straighten it out is a bad idea, I expect I'd put local dents and bumps in it rather than getting it back to truly flat. I've sanded down one end of the first reed block and it is getting much better. I can only just pull out a paper shim from under the block. I'll need to do the middle block too but I hope that will do.
Obviously these blocks can only be used in this box now, but I don't see this as a problem.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Bent fondo
« Reply #1 on: April 18, 2020, 11:01:23 AM »


I presume trying to straighten it out is a bad idea, I expect I'd put local dents and bumps in it rather than getting it back to truly flat.
Obviously these blocks can only be used in this box now, but I don't see this as a problem.
 
  interesting problem,-     you might expect movement in a wooden fondo , but aluminium ought to stay flat . any sign of trauma??
       would a small screw through the fondo into the reed block , clamp it up together ??  I know this is bad practice, but when a box is reaching a bit of age , a odd bodge is a possibility!!
     sanding the heel of the blocks is a fix, problem solved, well done.     those blocks are no longer any use to transplant into another box, in the future .  there are always pro's and con's  .
 I have thought that a very slight curvature of the fondo would tension it and make it more rigid . your fondo is curved the wrong way to achieve that ..    any way  , a fix is a fix , well done..  brian..
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bent fondo
« Reply #2 on: April 18, 2020, 11:16:54 AM »

This is a very common defect of old Hohners with fondo made of plywood.  It makes a big difference to the responsiveness and volume of the reeds. In extreme cases it can lead to adjacent reeds sounding along with the one being played. I’ve tried several fixes with varied degrees of success.

- like you, shaping the base of the reed blocks to fit the curve. It works but feels like a poor solution.

- as screw from the pallet side into the centre of the block.  Can work if you can find space between the pallets.  If you do this put a warning label on the reed block!

- attach a stiff wooden rib to the fondo on either side of the reed block, glued in place and screwed through the fondo.  In extreme cases the rib can be made slightly concave so the bending forces in the ribs and the fondo balance out and you end up with a flat fondo.  This is the best solution if there is space for the ribs.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bent fondo
« Reply #3 on: April 18, 2020, 11:29:48 AM »

No space for ribs and I didn't think a screw would be possible, but the centre block has a solid spine that is nice and thick at the bottom tapering to 1mm at the top.
A screw would work well here.
I'll try it now.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Bent fondo
« Reply #4 on: April 18, 2020, 11:34:32 AM »

Is there any future in just making a better gasket for it?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bent fondo
« Reply #5 on: April 18, 2020, 12:29:55 PM »

The screw worked. The whole box sounds great now.
A little bit of tweaking to the tuning and it's there.
any sign of trauma??
 
There is a bit of damage. The grille cover won't fit as the screw holes are broken out and it seems too small to reach anyway. The joints around it seem ok though.
It's held together with a mixture of bellows pins and there were a couple of broken bass reeds. Bellows are ok but need some retaping around belt buckle area.
I quite like it as I have a fondness for rough looking boxes that sound lovely.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal