Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Loading reeds with solder  (Read 859 times)

0 Members and 1 Guest are viewing this topic.

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Loading reeds with solder
« on: April 19, 2020, 11:23:19 AM »

I've always assumed that the sound of a simple tuned reed might be a 'better' sound in some way than the sound of a reed with the tip 'loaded' with solder. 'Loaded with solder' sounds kind of lumpy. That may be because I'm thinking about a vibrating reed as being encumbered with a lump of a material much less vibrant than the reed itself. On the other hand what we're really listening to is how the reed makes the air vibrate, and maybe it makes no difference to that. Any thoughts, all you tuners?
Logged
Old Paolo Sopranis in C#/D and D/D#

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Loading reeds with solder
« Reply #1 on: April 19, 2020, 11:27:57 AM »

Since tip loading reeds is a standard practice by all reed manufacturers I can see no reason not to do it.

Binci Reeds with large brass tip weights for example.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Loading reeds with solder
« Reply #2 on: April 19, 2020, 11:43:49 AM »

Sometimes you only need the tiniest smidge of solder to drop the pitch a tone or two. By the time you've worked it down and tuned it, you can barely see it.

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Loading reeds with solder
« Reply #3 on: April 19, 2020, 12:17:32 PM »

Since tip loading reeds is a standard practice by all reed manufacturers I can see no reason not to do it.

Binci Reeds with large brass tip weights for example.


So they would have been supplied by Binci with solder already on them?
I realise that it has been standard practice for ever to use solder, but still thought it might still be interesting to ask the question. There are other possible qualities to the sound of a reed as well as pitch, presumably, though some may be hard to describe or define.
« Last Edit: April 19, 2020, 12:21:58 PM by richard.fleming »
Logged
Old Paolo Sopranis in C#/D and D/D#

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Loading reeds with solder
« Reply #4 on: April 19, 2020, 12:19:42 PM »

Since tip loading reeds is a standard practice by all reed manufacturers I can see no reason not to do it.

Binci Reeds with large brass tip weights for example.


Would they have been supplied by Binci with solder already on or would that have been done later?
Those are standard, off the shelf, Binci reeds with, in the case of the bass reeds, large brass weights soldered in on the tip to achieve the desired pitch.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Loading reeds with solder
« Reply #5 on: April 19, 2020, 06:12:51 PM »

I've always assumed that the sound of a simple tuned reed might be a 'better' sound in some way than the sound of a reed with the tip 'loaded' with solder.

I think that is true to an extent.  The reason that manufacturers use weighted reeds for very low pitches is that unweighted reeds would have to be significantly longer in order to get the lowest bass notes and the whole instrument would have to be made larger to make enough space for the reeds to fit inside.   Like many design decisions it's a compromise to resolve conflicting demands.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal