Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: A "convertable" 1 row  (Read 3095 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
A "convertable" 1 row
« on: April 29, 2020, 11:09:42 PM »

Idly thinking about a convertible 1 row...

Is there any fundemental reason why the shell of a 1040or an HA112 could not be adapted to a removable reed block ?

The idea being to make it possible to try out different keys (including A myxelodian) without having a plethora of boxes.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A "convertable" 1 row
« Reply #1 on: April 29, 2020, 11:20:24 PM »

The biggest hurdle you would face would be removing the original blocks that are glued in place without destroying the fondo.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A "convertable" 1 row
« Reply #2 on: April 29, 2020, 11:22:53 PM »

...or the blocks themselves, the bottom of which are constructed from very thin and very fragile wood ply.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A "convertable" 1 row
« Reply #3 on: April 29, 2020, 11:23:45 PM »

For A mix you just need any box with a D row.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: A "convertable" 1 row
« Reply #4 on: April 30, 2020, 09:57:35 AM »

I should have said boxes in different keys.
The A Mixelodion would be a conventional 3rd button start A box with a flattened 7th and a bi-sonoric A bass....But putting removable reed blocks into a 1 row is really about being able to try (and retry) out playing boxes in different keys without any further complications of MAD.

I have a good airtight HA112 C which might be a candidate for adaptation.
 
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: A "convertable" 1 row
« Reply #5 on: April 30, 2020, 10:31:45 AM »

A good idea but I think you would be better using the shell and mech from a box and replacing the 'fondos' and existing reed blocks with a new, interchangable design. Keep the reeds mounted on a flat block but bolting them down hard against a gasket with fixings that go right through the fondo and maintain the rigid relationship between box and reed. Being able to remove the blocks for tuning would make life much easier too!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: A "convertable" 1 row
« Reply #6 on: April 30, 2020, 10:39:15 AM »

I should add that I'm thinking more of the 1040 type of design rather than anything with stops, I wouldn't even want to go there!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: A "convertable" 1 row
« Reply #7 on: April 30, 2020, 11:10:53 AM »

Would it not be much so more simple to use a box with a removable block in the first place?
I'm going to do the same sort of thing with my Erica, which (of course) has two blocks, but can still be played "on the row" exactly like a one row. Plus, as well as the Hohner Student blocks I have, which are relatively easy to adapt, I've also come across a couple of big PA reedblocks which will cut down and adapt to fit it! It seems as though the possibilities are endless, and not too much bother either!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: A "convertable" 1 row
« Reply #8 on: April 30, 2020, 02:17:17 PM »

... with a flattened 7th

People are forever rethinking the DBA and none of the changes ever stick. It's my experience that time spent musing or fretting about an improved/more capable system would have been better spent learning to master the one you have.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: A "convertable" 1 row
« Reply #9 on: April 30, 2020, 02:53:45 PM »

Stiamh, you're without doubt right; but only if that is your primary goal in playing melodeons. At least in my case, it's not. It is quite possible that I'm not alone in this, and that others, also, just want to enjoy messing about and knocking out a few tunes now and then, whilst also exploring other, alternative, possibilities for their instruments.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: A "convertable" 1 row
« Reply #10 on: April 30, 2020, 04:23:01 PM »

why not use a 114 body/case and modify the fixed blocks? it will give you 2 set of reed blocks that can be used in different keys..you can set each blocks to needed key, let's say 1st block key of A , and 2nd block D..just push the stops down to silence whichever key not needed and pull the stops up to play the key you need  ;) you won't have to swap or change the blocks, one single row box with 2 different key  8)
not sure how bass side would work out but you can modify bass side too..you can even use 1040 bass side and 114 treble side, it will give you 2 bass and 2 chords in correct notes,top 2 bass button for A key, and lower 2 button for D key.. Hohner cases are all same size so they fit without any mod.       
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A "convertable" 1 row
« Reply #11 on: April 30, 2020, 04:39:17 PM »

I made a 115, it was a 114 in D to which I added a stop in the bass to change it from D/A to D/Emin.


https://youtu.be/ajUPVDRAxWQ

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: A "convertable" 1 row
« Reply #12 on: April 30, 2020, 06:56:16 PM »


 It's my experience that time spent musing or fretting about an improved/more capable system would have been better spent learning to master the one you have.
[/quote]

Couldn't agree more.
Logged
Old Paolo Sopranis in C#/D and D/D#

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A "convertable" 1 row
« Reply #13 on: April 30, 2020, 06:59:50 PM »

Quote
It's my experience that time spent musing or fretting about an improved/more capable system would have been better spent learning to master the one you have.

Couldn't agree more.
Thus possibly preventing any improvement/innovation. Always doing it how we always did it means we will always get what we always got.
« Last Edit: April 30, 2020, 07:01:24 PM by Lester »
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: A "convertable" 1 row
« Reply #14 on: April 30, 2020, 07:38:09 PM »

... with a flattened 7th

People are forever rethinking the DBA and none of the changes ever stick. It's my experience that time spent musing or fretting about an improved/more capable system would have been better spent learning to master the one you have.

Lester beat me to it.
Discontent with the inadequacies of what is available drives progress. I don't expect the systems you favour would exist if people had just made do with whatever went before.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: A "convertable" 1 row
« Reply #15 on: April 30, 2020, 08:39:11 PM »

... with a flattened 7th

People are forever rethinking the DBA and none of the changes ever stick. It's my experience that time spent musing or fretting about an improved/more capable system would have been better spent learning to master the one you have.

Lester beat me to it.
Discontent with the inadequacies of what is available drives progress. I don't expect the systems you favour would exist if people had just made do with whatever went before.

This is undeniably true, of course. I'm just looking at it, in this specific context, from the point of view of the novice player, which I once was (and still am really), wondering as I did about things that might make what seemed like a very awkward and difficult instrument easier, instead of working on taming the beast. You see points of view like this expressed often on here, but rarely from experienced players.

In the process of taming the beast I found that many mountains become molehills or disappeared altogether. But as Edward remarked earlier, it all depends on your goals. Have fun with custom systems by all means. Whatever floats your boat.  :|glug

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: A "convertable" 1 row
« Reply #16 on: April 30, 2020, 08:48:15 PM »

I made a 115, it was a 114 in D to which I added a stop in the bass to change it from D/A to D/Emin.


https://youtu.be/ajUPVDRAxWQ


Remarkable. Any pictures to illustrate the detail of how you did that, please, Lester?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A "convertable" 1 row
« Reply #17 on: April 30, 2020, 08:58:11 PM »

I made a 115, it was a 114 in D to which I added a stop in the bass to change it from D/A to D/Emin.


https://youtu.be/ajUPVDRAxWQ


Remarkable. Any pictures to illustrate the detail of how you did that, please, Lester?


Fraid not and I have since unmodded it as it was of little utility but and interesting project

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A "convertable" 1 row
« Reply #18 on: April 30, 2020, 09:17:21 PM »

If I may be permitted to follow up on what Stiamh is saying, I think it might be worth mentioning that A mixolydian is actually quite easy and straightforward on a D row. I’m not sure that it would get any easier by going a different route. Likewise playing in E Dorian (E minor, sort of..) is probably easiest and most straightforward on a D row. I’m not sure you’d want to have one set of reeds (or box) to play in A mix, another to play E Dorian, another to play in D, etc.

Of course, at the end of the day, do whatever it is that inspires you, but it’s food for thought.  Regarding making removable blocks in an HA114/3/2, I know of a few cases where boxes were ruined in attempt to get the blocks unglued. I do seem to recall someone on here having successfully made them removable, but it’s possible that the glue holding them down had failed, making them easy to remove in the first place.

Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: A "convertable" 1 row
« Reply #19 on: April 30, 2020, 10:49:49 PM »

I would try to router out the reed blocks if I was going to do it.
Just shy of the fondo and sand the rest.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal