Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Taping off thirds  (Read 5474 times)

0 Members and 1 Guest are viewing this topic.

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Taping off thirds
« on: September 27, 2009, 09:30:04 PM »

There's some talk in other threads about this, so I was wondering what the actual process is? I'm not sure which bit to tape off.
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Taping off thirds
« Reply #1 on: September 28, 2009, 12:23:21 AM »

You need to work out which of the 3 chord reeds is your 3rd. You can do this by taping over 2 of the 3 holes which are opened by each chord pallet and then use a tuner/another instrument to work out which note that is. Repeat for each chord until you find the notes you want to block. The push and pull 3rds are both on the same plate so you can just tape over the hole on the reed block front or use some non-depositing masking tape actually on the upper reed tongue and across the upper valve to stop air getting into the lower reed and movement on the top reed. The material used to stop the reed moving doesn't really matter as long as it's not going to cause damage in place or leave gunk which will block the reed after removal. Someone on the forum said they actually used a bit of crisp packet to stop the reed moving!

The notes you need to find on the push to block the plate or hole:

C chord (CEG): block the E
G chord (GBD): block the B
B chord (BD#F#): block the D#
D chord (DF#A): block the F#

If your bass chord blocks are removable I would say it was best just to put a small square of card or paper over the relevant holes.
« Last Edit: September 28, 2009, 12:38:36 AM by LJC »
Logged

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Taping off thirds
« Reply #2 on: September 28, 2009, 12:33:45 AM »

Whoops, forgot to mention that I'm a complete noivce when it comes to melodeon terminology  :-[ Thanks LJC, that was very helpful, but I'm not sure which parts you are talking about!
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Taping off thirds
« Reply #3 on: September 28, 2009, 12:44:18 AM »

You need to open up the bass end - take out the pins which hold the bellows frame to the bass end.

Once its off you will see two wooden blocks sticking up with several metal plates waxed onto them. One block will have 8 plates which are the bass reeds, the other will have 12. The block with 12 contains the chords. Each chord is set out in a triangle with 2 reeds above and one below, or vice versa. These are operated by the triangular or trapezoid pallets and mechanism underneath the plate where your hand rests under the bass strap.

The plates are the metal bits which contain the reed tongues. The tongues are the bits that vibrate and make the sound. Avoid touching these if possible, you don't want to get dirt or finger grease on them.

What box are you looking to do it on, I might be able to be more specific?
Logged

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Taping off thirds
« Reply #4 on: September 28, 2009, 03:51:11 AM »

Are you sure you want to? Guess there's not much harm in trying and untaping later though.

What I really miss is a full left hand Am chord (On a D/G). It would really spice up a lot of tunes.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Taping off thirds
« Reply #5 on: September 28, 2009, 07:40:48 AM »

You can get a full Am7 on the pull with the A bass and C major chord.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Taping off thirds
« Reply #6 on: September 28, 2009, 08:33:44 AM »

The push and pull 3rds are both on the same plate
On Italian boxes this is true, but not with most Hohners

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Taping off thirds
« Reply #7 on: September 28, 2009, 09:19:27 AM »

C  xx   E   xx
x  xx   A   xx

pull = Am triad! Albeit a little dark on the D/G.

  But it's fine as a passing chord when you REALLY need Am

   But I'm a fudger, I do C+E.chord (C maj7) and A+C.chord (A min7)
Logged
  _       _    _      _ 

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Taping off thirds
« Reply #8 on: September 28, 2009, 09:35:22 AM »

Thank you Theo. I will have to take apart more Hohners!
Logged

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Taping off thirds
« Reply #9 on: January 06, 2010, 07:57:24 PM »

Right, I've currently got my Pokerwork in bits have have the 12 reed reedblock out, but I'm not sure which where to find the third reeds. I've tried identifying by ear but just got sawdust in my mouth and am no nearer to the answer. If someone could tell me where to find them, that'd be great!  (:)
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Taping off thirds
« Reply #10 on: January 06, 2010, 09:14:59 PM »

The only reliable way is to sound each reed and make a chart showing where the notes are. They may not all be in their original positions, and I'm not sure if they always were fitted in the same places by the factory. If you have to blow them by mouth then make sure you get all the dust off first!  Why is there sawdust in them anyway? Have you been modifying the woodwork?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Taping off thirds
« Reply #11 on: January 06, 2010, 10:04:52 PM »

Right, I've now done that and have identified which reeds need to be taped off.  I've done the third in the C chord by taping the hole itself as the reeds go in the same direction, but this is not so for the rest. How do I silence a reed in one direction and not the other?

I think the sawdust - well not exactly saw dust, but dust from wood certainly - must have been left over from the factory. It's a fairly new box and I've not opened up this end before.
« Last Edit: January 06, 2010, 10:07:46 PM by Ollie »
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Taping off thirds
« Reply #12 on: January 06, 2010, 10:54:59 PM »

Just re-read the thread to see if I'd missed anything and LJC's first post makes much more sense now (I think)... I've stopped the thirds on all the push chords by putting a folded piece of paper between (apologies for the dodgy technical language) the reed and the hole to stop it vibrating. I think this is what LJC suggests above. If so, how on earth do you do that for the pull chords if the reeds are inside (more dodgy technical language) the hole the air goes through?
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Taping off thirds
« Reply #13 on: January 06, 2010, 11:32:35 PM »

You can poke a slip of paper under the valve and in between the pull red and its slot.  Problem with just using a slip of paper is that it can easily slip out later.  Stick tape over the reed, for push reeds, or over the valve for pull reeds is the usual method, actually under the valve is better if you want to be able to reverse the change without having to replace the valve.  Removing the tape over the push reed can leave gunge on the reed, you can minimise this by using Scotch Invisible/Magic tape.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Taping off thirds
« Reply #14 on: January 07, 2010, 09:29:24 AM »

Thanks Theo, after much experimenting and decoding of melodeon terminology, I've managed to get rid of all the thirds.  ;D Sounds great now, cheers! :||:
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Taping off thirds
« Reply #15 on: January 15, 2010, 12:15:22 AM »

BAHHHH thirds are overated
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal