Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Plastic material (HDPE?)  (Read 1290 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Plastic material (HDPE?)
« on: May 04, 2020, 07:42:27 AM »

On Emmanuel Pariselle's building course a couple of the jigs are made with a sort of white plastic material, which is machinable. I don’t know what this stuff is called but it might (for instance) be good to make runners for table saw jigs. Is this the same stuff as HDPE, which is available (e.g.) on eBay? If not can someone with the knowledge advise what this or similar material is called? And maybe offer advice on cutting it...

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Plastic material (HDPE?)
« Reply #1 on: May 04, 2020, 09:25:43 AM »

There's also nylon, which can be worked with most normal tools.

https://www.theplasticpeople.co.uk/products/plastic-sheets/nylon/


SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Plastic material (HDPE?)
« Reply #2 on: May 04, 2020, 09:35:13 AM »

Ah yes, that might be the stuff. I thought it was nylon, but on eBay I get ads for stockings n stuff, which is not quite what I’m looking for  ;D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Plastic material (HDPE?)
« Reply #3 on: May 04, 2020, 09:35:29 AM »

I think the jigs used by Emmanuel Pariselle are made of nylon rather than HDPE.
Nylon can be made in blocks and sheets.
https://www.theplasticshop.co.uk/nylon-66-sheet-8mm-10mm-12mm-16mm-20mm-25mm-30mm-40mm-50mm-thick.html

It can be machined into the required shapes:
https://www.theplasticshop.co.uk/plastic_technical_data_sheets/engineering_plastics_machining_guide.pdf
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Plastic material (HDPE?)
« Reply #4 on: May 04, 2020, 09:51:28 AM »

Delrin or acetal are also candidates, probably what I would consider first, and less likely to give dodgy search results. Very nice to machine.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Plastic material (HDPE?)
« Reply #5 on: May 04, 2020, 10:05:26 AM »

Delrin or acetal are also candidates, probably what I would consider first, and less likely to give dodgy search results. Very nice to machine.
Hmm... yes possible, I agree. But I still tend to favour nylon as a candidate, as it has a slight resilience (plastic deformation in the physics sense), whereas as far as I'm aware, delrin is quite hard and has a tendency towards brittleness when machined. Emmanuel's jigs definitely had a slight resilience - you could press a fingernail on to it and feel the slight deformation of the surface.

I suppose the obvious thing to do is to contact EP and ask him! 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Plastic material (HDPE?)
« Reply #6 on: May 04, 2020, 10:20:34 AM »

Delrin and nylon are both standard materials for jig making in industrial assembly. I've used them both a lot. Delrin seem, generally, to have a longer life. Both are similar to work and easily machinable. Both take screws and fixings well. They don't glue very well.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Plastic material (HDPE?)
« Reply #7 on: May 04, 2020, 10:25:42 AM »

They don't glue very well.
Which is why we used them to make the reed blocks. The PVA glue used to join the wood parts of the reed blocks did not stick to the plastic jig.  :Ph
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic material (HDPE?)
« Reply #9 on: May 04, 2020, 05:04:07 PM »

I made some reed block jigs.  Material is delrin/acetal bought as offcuts from eBay.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Plastic material (HDPE?)
« Reply #10 on: May 04, 2020, 06:05:23 PM »

UHMW Polyethylene maybe ??

https://www.leevalley.com/en-ca/shop/hardware/jig-and-fixture-parts/32045-uhmw-polyethylene

This link includes a statement that most industrial jigs are made of UHMW. Not the case down our way, at least, not in the areas I was involved with (industrial enclosure manufacture). Cheaper jigs were nylon and better ones were Delrin (Dupont's name for  Polyoxymethylene (POM)).

Delrin tends to machine more accurately, because it doesn't move away from the cutter quite so much. It is also more durable. To be honest, we never used polyethylene much. Some of our German engineers used it, but I can't report superior results..

Both are excellent at rejecting most common adhesives. We used them for gluing jigs for adhesives, including polyurethane and methacrylate.

Both machine ok and take threads pretty well.

For the applications you're looking at, nylon should be fine.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Plastic material (HDPE?)
« Reply #11 on: May 04, 2020, 07:40:18 PM »

Thanks...sounds like you really know your stuff...er materials.

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Plastic material (HDPE?)
« Reply #12 on: May 05, 2020, 05:40:39 AM »

I think the jigs used by Emmanuel Pariselle are made of nylon rather than HDPE.
Nylon can be made in blocks and sheets.
https://www.theplasticshop.co.uk/nylon-66-sheet-8mm-10mm-12mm-16mm-20mm-25mm-30mm-40mm-50mm-thick.html

It can be machined into the required shapes:
https://www.theplasticshop.co.uk/plastic_technical_data_sheets/engineering_plastics_machining_guide.pdf
Casting my mind back 50 years, I think that HDPE (high density polyethylene) is a poor
candidate for machining because of its relatively low melting point? I can't remember
that we ever did anything like that with the stuff we worked with in the lab' I worked in
at the time.
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Plastic material (HDPE?)
« Reply #13 on: May 09, 2020, 08:02:17 AM »

HDPE machines nicely. Some friends and i made a massive pendulum clock and used a HDPE cutting board (about 1/4 the cost of buying it as stock HDPE) and machined the escapement out of it. main gears were wood and about 1.3 meters in dia.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Plastic material (HDPE?)
« Reply #14 on: May 09, 2020, 12:22:21 PM »

HDPE machines nicely. Some friends and i made a massive pendulum clock and used a HDPE cutting board (about 1/4 the cost of buying it as stock HDPE) and machined the escapement out of it. main gears were wood and about 1.3 meters in dia.
I stand corrected! Maybe I'm thinking of LDPE - it was 50 years ago...😎
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Plastic material (HDPE?)
« Reply #15 on: May 09, 2020, 01:05:37 PM »

HDPE is widely used, for instance for milk containers, and if you are so inclined you can find a lot videos on YouTube on how to recycle it at home. In particular, I've seen people go on to turn it, e.g for pen blanks, and mill it. I have no immediate plans to make melodeon parts out of recycled food packaging and milk containers, but it's comforting to know that I probably could if I ever felt the urge.
Actually, having looked at the price of Delrin recently, ...
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Plastic material (HDPE?)
« Reply #16 on: May 09, 2020, 01:33:35 PM »

It might be possible make bellows from recycled tetra packs.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal