Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Balancing left hand and right hand side of a box  (Read 1926 times)

0 Members and 1 Guest are viewing this topic.

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Balancing left hand and right hand side of a box
« on: May 10, 2020, 06:57:53 PM »

Has anyone got advice on how to balance the LH and RH on a box. I sometimes find the bass on my Rik slightly overpower the RH side. I’m not sure if there is a way of muting the LH slightly to get a better balance, but any tips or advice would be great fully received.

Thanks
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #1 on: May 10, 2020, 07:44:36 PM »

Has anyone got advice on how to balance the LH and RH on a box. I sometimes find the bass on my Rik slightly overpower the RH side. I’m not sure if there is a way of muting the LH slightly to get a better balance, but any tips or advice would be great fully received.

Thanks

The usual question asked when evaluating or comparing such things is:

Where are measurements taken and/or evaluation performed?

Are your perceptions based on what you hear as a player?  Have you had someone else play while you listened from various distances/positions?

Other considerations/variables would be acoustic environment and ambient sound.
Then there's the physics of sound.  Lower pitches require more acoustic energy to be perceived as equally loud, so in a sound reproduction system you end up with massive sub-woofers being paired with mid-range drivers and small tweeters.  You can extrapolate downwards for our boxes.  And remember that bass or lower frequencies tend toward omni-directionality while higher, treble sounds are quite directional.
As such, the player will naturally hear the omni- portion differently than the directional component.

All this simply means the balance will vary with distance and acoustics.  So before you damp the LH, be sure you're not depriving any dancers or listeners/audience of the LH part of the music.

All that aside, if I want less volume from my LH I just lighten my touch on the buttons...or whatever it is that I've come to do to achieve the desired result after decades of playing.  You state the issue occuring "sometimes" which would seem to be an issue of technique or arrangement rather than a technical issue which if "fixed" might well result in shifting the issue toward the LH "sometimes" being underwhelming.
« Last Edit: May 10, 2020, 08:11:28 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Balancing left hand and right hand side of a box
« Reply #2 on: May 10, 2020, 08:11:17 PM »

The box is VERY directional and I was astonished hearing my own kit played by another. Quite different!

You can effectively quieten either end by taking your finger off that button slightly sooner, or increase by “attacking” with a bellows pull as you hit a note. It is all in the ear of the listener … but good bellows and air hole technique can achieve miracles 🙂

Audience wise - just point the quieter end toward them 😉
Logged
  _       _    _      _ 

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #3 on: May 10, 2020, 08:12:33 PM »

The box is VERY directional and I was astonished hearing my own kit played by another. Quite different!

You can effectively quieten either end by taking your finger off that button slightly sooner, or increase by “attacking” with a bellows pull as you hit a note. It is all in the ear of the listener … but good bellows and air hole technique can achieve miracles 🙂

Yes!  Bellows pressure can be a good way to implement the equal loudness principle.
« Last Edit: May 10, 2020, 08:31:19 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #4 on: May 10, 2020, 08:54:26 PM »

Thanks Dick and Chris for the replies

Yes, I agree that what you hear as a player is not what other people do. But it's been something that I've picked up when hearing others play the box (and when I am playing it as well). I often feather the air button in order to take the edge off bu adjusting the below pressure. It's not a massive problem, but social isolation does give you time to ponder these things................. which is why I am wondering if there is a tinkering solution.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #5 on: May 10, 2020, 09:05:33 PM »

Like I said, technique which can be applied as needed has got to be better than doctoring the box.

My G/C boxes all have more bass presence in C.  When playing in G I often want more low end, so I bend the bellows and lean over to bounce the bass notes off the floor.  My tech solution involves using a proper chair...

Edit:

Just sat down with an SPL meter from my sound guy tool box.  Chris spoke of letting off the buttons earlier, I think of "touch" meaning both pressure on the button AND duration.  You might say tapping the button as opposed to pushing it.  Two things happen:

The shorter duration gives crisper results and may well reduce perceived presence.  Tapping affects (can affect) the speaking time of the reed and the limited duration/swift closure really cuts down the LH volume.  I use tapped LH a lot when fudging through a chord that is unavailable on the box but requisite for the tune.  Something's there, but it's less present volume-wise, keeps the rhythm supported and allows the listeners to "hear" the note which they were primed to expect by the flow of the arrangement.  Diatonic sleight of hand.

This may well be why I prefer my Hohners.  There's just enough ooh-WAH in the speaking time of the bass reeds to easily yield a distinct and distinctly useful reduction/softening of the low notes with early release.

It may well be that this range of expression is not as large on higher pitched boxes (D/G rather than G/C) or boxes with higher quality reeds adjusted for rapid speaking time.  My Hohners definitely allow a pretty fair speaking curve, enough to allow for easy and effective dynamic control.

Big shout out for Hohner!
« Last Edit: May 10, 2020, 09:30:29 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Balancing left hand and right hand side of a box
« Reply #6 on: May 10, 2020, 09:51:47 PM »

Wow!  That's quite an advert for Hohner.  Pity they don't make them anymore...

Actually the worst case I heard of this was an Erica, a previous owner had replaced the lining cloths with a good thin weave on the bass end and a thick one on the treble grille - couldn't hear the tune at all.  Simply rectified by replacing the cloths again with some loudspeaker cloth.  Excellent stuff for the job.  The makers do (generally) get the ratio of the LH and RH openings about right, but some people will prefer a slightly different balance.  It's easy enough to add a layer of material inside the cloths until you find the sound you want.  Much more difficult to make an end louder.

Rob.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #7 on: May 10, 2020, 11:08:06 PM »

Wow!  That's quite an advert for Hohner.  Pity they don't make them anymore...

Rob.

I've been buying up Ericas and Pokerworks for 40 years.  Started out to make sure I wouldn't run out.  I haven't.

I'm going to dig in my heels, though, on limiting performance of an instrument when the issue in question occurs "sometimes" and a playing technique may well suffice.
That calls to mind the old wheeze "The patient died, but the operation was a success."
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Balancing left hand and right hand side of a box
« Reply #8 on: May 10, 2020, 11:20:44 PM »

The shorter duration gives crisper results and may well reduce perceived presence.  Tapping affects (can affect) the speaking time of the reed and the limited duration/swift closure really cuts down the LH volume.  I use tapped LH a lot when fudging through a chord that is unavailable on the box but requisite for the tune. 

I think I have a habit of tapping the bass/chord buttons on my Hohners too hard, which tends to creates an annoying noise on recordings, even after the pallets have been re-felted. Perhaps the bass side buttons need rebushing.
Do you lift fingers off the buttons when you tap, or is the action more restrained? I haven't noticed any extraneous tapping noises on your recordings.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Balancing left hand and right hand side of a box
« Reply #9 on: May 11, 2020, 03:53:08 AM »

The shorter duration gives crisper results and may well reduce perceived presence.  Tapping affects (can affect) the speaking time of the reed and the limited duration/swift closure really cuts down the LH volume.  I use tapped LH a lot when fudging through a chord that is unavailable on the box but requisite for the tune. 

I think I have a habit of tapping the bass/chord buttons on my Hohners too hard, which tends to creates an annoying noise on recordings, even after the pallets have been re-felted. Perhaps the bass side buttons need rebushing.
Do you lift fingers off the buttons when you tap, or is the action more restrained? I haven't noticed any extraneous tapping noises on your recordings.

I don't maintain a constant contact with the buttons...but I use the least amount of force possible.  My Hohners do rattle a good bit, but clicking of the action upon opening is merely percussion while pallet slap upon closing is noise to my mind.  I'm pretty much a two fingered LH player...even on a PA with Stradella bass.

I do a fair amount of chord button tapping in OTRB simply to support the RH with some percussion.  There's a pretty fair amount of rattle going on, but "purposeful".
« Last Edit: May 11, 2020, 04:02:02 AM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #10 on: May 11, 2020, 06:54:23 AM »

A comprehensive answer Dick! I’ll remove the term ‘sometimes’ from my original post as it seems to be confusing the situation. The basses are louder on the LH of my Rik. It’s not a problem I find on my Handry or Loffet (both 12 bass), so while I appreciate that playing technique could be an issue, my experience on the other boxes suggests not. That said a I’m not looking to rip the LH to bits to find a solution, just wondering if this is something that can be tinkered slightly  (:)
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Balancing left hand and right hand side of a box
« Reply #11 on: May 11, 2020, 08:27:15 AM »

A comprehensive answer Dick! I’ll remove the term ‘sometimes’ from my original post as it seems to be confusing the situation. The basses are louder on the LH of my Rik. It’s not a problem I find on my Handry or Loffet (both 12 bass), so while I appreciate that playing technique could be an issue, my experience on the other boxes suggests not. That said a I’m not looking to rip the LH to bits to find a solution, just wondering if this is something that can be tinkered slightly  (:)
Looks like muffling inside the bass grille with an extra piece of cloth might be an answer. Using very small dots of a fabric adhesive would make subsequent removal easy enough if the cloth used proved to be too thick and overdid the job.
Felt (for example) would work in 2 ways - it would offer a slight resistance to throughput air flow meaning that the driving pressure across the bass end reed plates would be slightly lower than the treble end and secondly the muffling effect on the sound waves carried from the reeds themselves.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Balancing left hand and right hand side of a box
« Reply #12 on: May 11, 2020, 08:49:27 AM »

A comprehensive answer Dick! I’ll remove the term ‘sometimes’ from my original post as it seems to be confusing the situation. The basses are louder on the LH of my Rik. It’s not a problem I find on my Handry or Loffet (both 12 bass), so while I appreciate that playing technique could be an issue, my experience on the other boxes suggests not. That said a I’m not looking to rip the LH to bits to find a solution, just wondering if this is something that can be tinkered slightly  (:)
Looks like muffling inside the bass grille with an extra piece of cloth might be an answer. Using very small dots of a fabric adhesive would make subsequent removal easy enough if the cloth used proved to be too thick and overdid the job.
Felt (for example) would work in 2 ways - it would offer a slight resistance to throughput air flow meaning that the driving pressure across the bass end reed plates would be slightly lower than the treble end and secondly the muffling effect on the sound waves carried from the reeds themselves.
I would add the slight caution that reducing the airflow into the bass end cabinet will also reduce the effectiveness of the air button

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Balancing left hand and right hand side of a box
« Reply #13 on: May 11, 2020, 09:43:16 AM »

I would have thought that in an instrument that relies at least in part on its inherent rhythm for its appeal, a good strong bass would be an advantage. Having  arranged P.A on several occasions for Tony hall at a folk club I used to run, I remember him being insistent that the bass  on his boxes was well to the fore.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Balancing left hand and right hand side of a box
« Reply #14 on: May 11, 2020, 09:48:31 AM »


I would add the slight caution that reducing the airflow into the bass end cabinet will also reduce the effectiveness of the air button
[/quote]

Assuming this is the old ‘window’ Rik that I think it is, then the air button was enlarged a very long time ago by the first owner.
I’m sure it will have enough leeway to cope with a little extra airflow restriction if necessary.
The bass end always was somewhat on the enthusiastic side.
Logged

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Balancing left hand and right hand side of a box
« Reply #15 on: May 11, 2020, 10:51:28 AM »

I also experience  the issue of of an apparently over-loud LH, and I don't really believe the stories about it being an illusion caused by greater directionality of treble notes: (i.e. that the bass sounds bend round towards the player while the treble sounds shoot out towards the right, away from the player's ears)  But I haven't done systematic experiments to test this.

On the box I made on Emmanuel Pariselle's course in France, he has a couple of rotating baffles which enable you to adjust the size of the sound holes on the bass end, or even to close them off.  He said this was particularly useful when playing with only one reed on the right.  I believe that, as often the case, Serafini was first with this idea, which he has on his Darwin models at least. So this seems to show that a couple of top makers are aware of the issue.

On my 3R 12B 3V Guais, I have stuck some gaffer tape over some of the bass end sound holes, but I can't cover over too much or it will interfere with the efficiency of the air button (which is still not gulpy enough for me, even after Microbot's skilfull enlargement of the air hole)
« Last Edit: May 11, 2020, 01:59:10 PM by Jackhumphreys »
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #16 on: May 11, 2020, 11:00:18 AM »


I would add the slight caution that reducing the airflow into the bass end cabinet will also reduce the effectiveness of the air button

Assuming this is the old ‘window’ Rik that I think it is, then the air button was enlarged a very long time ago by the first owner.
I’m sure it will have enough leeway to cope with a little extra airflow restriction if necessary.
The bass end always was somewhat on the enthusiastic side.



It is the very same! Even though I now also have a Handry in my life I keep picking up the Rik. It is very much loved.

Describing the bass end as 'enthusiastic' is a much better description  ;D

(oh and that air button is great - it gulps air like a whale  :D )
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #17 on: May 11, 2020, 11:21:11 AM »

I also experience  the issue of of an apparently over-loud LH, and I don't really believe the stories about it being an illusion caused by greater directionality of treble notes: (i.e. that the bass sounds bend round towards the player while the treble sounds shoot out towards the right, away from the player's ears)  But I haven't done systematic experiments to test this.

On the box I made on Emmanuel Pariselle's course in France, he has a couple of rotating baffles which enable you to adjust the size of the sound holes on the bass end, or even to close them off.  He said this was particularly useful when playing with only one reed on the right.  I believe that, as often the case, Serafini was first with this idea, which he has on his Darwin models at least. So this seems to show that a couple of top makers are aware of the issue.

On my 3R 13B 3V Guais, I have stuck some gaffer tape over some of the bass end sound holes, but I can't cover over too much or it will interfere with the efficiency of the air button (which is still not gulpy enough for me, even after Microbot's skilfull enlargement of the air hole)

Just out of interest, did the gaffa tape change the bass sound or just lower the volume?

 Funnily enough I'm going to have a chat with Microbot about the airhole on my Handry. I think I've got a bit to used to the amount of air that the Rik can shift  ;D
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Balancing left hand and right hand side of a box
« Reply #18 on: May 11, 2020, 12:33:41 PM »

I wasn't advocating felt as a baffle, probably far too restrictive in the case of a standard box - might apply if someone had bored twice the number of holes in the bass end though.  A second layer of loose weave fabric would at least demonstrate the principle.  It's just a question of finding the right fabric to suit your style of playing.  I'm rather of the opinion that playing technique can be helpful, but wouldn't want the box set-up to force the player to always adopt a particular technique to overcome an imbalance.

Whilst I prefer the response of a good Italian box with Tipo a Mano reeds for outdoor playing, the earlier Hohner Club models got a lot of details right.  The really deep basses, though quite loud are very deep and don't interfere with the perception of the treble voices.  In addition, largely as they were designed to be played mostly on the pull, their air buttons shift a lot of air!  Some models have a single large port, but others have a second port and pallet linked "piggy back" to the other end of the board - could be a useful way of doubling the throughput if there is room on other boxes.

Rob.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Balancing left hand and right hand side of a box
« Reply #19 on: May 11, 2020, 02:11:39 PM »

Thanks for the various replies and views. All are appreciated. I had a productive phone call with Microbot at lunch. Mike knows the box well and has also suggested adding material to the inside of the vents on the bass end as a potential solution to the problem. I think I might have something that will work. I’ll update on how it goes  (:) A totally reversible fettle as well!
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal