Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Changing a reed from a D to a C  (Read 678 times)

0 Members and 1 Guest are viewing this topic.

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Changing a reed from a D to a C
« on: May 13, 2020, 12:28:03 PM »

I have been toying with the idea of changing the duplicated low D to middle  C on one of my D/G boxes, for some time. I've always thought that this would involve sourcing new reed plates (which might be problematic) but then I thought - is it possible to lower the tuning on the current reeds by a whole tone - or is that too much of a stretch ?
Yes - I know the C reed would be on the push, but I've already got a push C an octave above on my part row.
What is the expert opinion ? Ideally of course, I'd probably look to buy another 2.5 row instrument, new or second hand, and change the entire layout to suit my preferences but the piggy bank is nearly empty and will be for a very long time I think !

J
Logged
Old Bones Dance Band

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Changing a reed from a D to a C
« Reply #1 on: May 13, 2020, 12:45:36 PM »

You should be able to lower the reeds by a whole tone by weighting the tip with a blob of solder. I'm fairly sure the process has been described on this forum more than once, so a bit of a google search from the blue strip menu on the header of the forum pages should come up with the relevant posts. Failing that, I'm sure other fettlers will be along shortly to help.

The advantage of using solder to lower the pitch is that it is pretty much non-destructive and reversible if you should ever want to change it back to the original pitch. Simply file away the solder. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Changing a reed from a D to a C
« Reply #2 on: May 13, 2020, 03:04:19 PM »

One of Lester's videos shows the process. It’s pretty straightforward. BTW dropping a tone only requires a really small blob of solder.

Julian S

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1628
  • D/G Pastourelle 2, Dony, Pokerwork, G/C Pariselle
Re: Changing a reed from a D to a C
« Reply #3 on: May 13, 2020, 03:17:54 PM »

Thanks ! Bit of solder...needs further thought.

J

Logged
Old Bones Dance Band

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Changing a reed from a D to a C
« Reply #4 on: May 13, 2020, 03:26:48 PM »

One of Lester's videos shows the process. It’s pretty straightforward. BTW dropping a tone only requires a really small blob of solder.

It's this one here:
https://www.youtube.com/watch?v=Zm8L5zrNCBs
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal