Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Swiss cut files vs diamond needle files  (Read 2518 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Swiss cut files vs diamond needle files
« on: May 14, 2020, 01:33:44 PM »

This topic was touched on in a different thread recently but I thought I would start a new one. Can anyone offer their opinions and experiences on using Swiss cut needles files versus diamond needle files for tuning? I’ve only ever used high quality diamond-coated needle files, but I find they still wear out quickly. I’m at the point where I need to replace my files and am wondering if I shouldn’t consider using Swiss cut files instead.

With diamond files, the filing can be done in both directions, running the file back and forth as you work. My understanding is that Swiss cut files are only supposed to be used in one direction? Is this so? The diamond files I use have a fine grit of around 600x. What would be the equivalent for Swiss files? What cut do people recommend?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Swiss cut files vs diamond needle files
« Reply #1 on: May 14, 2020, 01:54:00 PM »

I’ve recently started using a couple of diamond files.  The one I find most useful is a fairly large triangular 600grit. I’ve been using the same file for a few months now and after an initial bedding in period where cutting performance went through an initial slowing it’s now showing no sign of getting worse.  I do need to clean it periodically.p

What I like about it is that it cuts very slowly and consistently and it last much longer than a traditional Swiss file.  So it’s my preferred tool for final tuning, especially for smaller reeds, once one within about 5 cents or so of the target pitch.
For anything where more metal has to be removed quickly I will pick up a traditional cut file.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Swiss cut files vs diamond needle files
« Reply #2 on: May 14, 2020, 02:02:20 PM »

Can I ask which diamond file brand/make you started using in particular?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Swiss cut files vs diamond needle files
« Reply #4 on: May 14, 2020, 04:25:44 PM »

I’ve recently started using a couple of diamond files.  The one I find most useful is a fairly large triangular 600grit. I’ve been using the same file for a few months now and after an initial bedding in period where cutting performance went through an initial slowing it’s now showing no sign of getting worse.  I do need to clean it periodically.p

What I like about it is that it cuts very slowly and consistently and it last much longer than a traditional Swiss file.  So it’s my preferred tool for final tuning, especially for smaller reeds, once one within about 5 cents or so of the target pitch.
For anything where more metal has to be removed quickly I will pick up a traditional cut file.

My experience is very similar to Theo's. I only use diamond files now.
I prefer a smaller file (mine are 14 cm long), purely for convenience of handling in confined spaces.

If I need to remove a lot of metal (rarely), I use a 120 grit diamond file, but for normal tuning work the 600 grit file is very gentle and 'safe' to use.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Swiss cut files vs diamond needle files
« Reply #5 on: May 14, 2020, 11:26:17 PM »

How interesting. I’ve had some bigger diamond files for a few years now and I don’t like them for tuning. Maybe the grit is too coarse. But they never feel like they are cutting in the way a steel file does. My current set of needle files need replacing so perhaps I should try some of these.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Swiss cut files vs diamond needle files
« Reply #6 on: May 15, 2020, 01:58:41 AM »

How interesting. I’ve had some bigger diamond files for a few years now and I don’t like them for tuning. Maybe the grit is too coarse. But they never feel like they are cutting in the way a steel file does. My current set of needle files need replacing so perhaps I should try some of these.

I found that the finer grit diamond files (600) worked much better than the coarser ones, but seemed to be much less common. Most of the ones online seem to be less than 200 grit.

The ones I have weren’t cheap, but the diamond coating seems to wear off sooner than I would have expected. I don’t believe I’m misusing them...?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Swiss cut files vs diamond needle files
« Reply #7 on: May 15, 2020, 10:03:50 AM »

My 600 grit file looks as though the coating has worn off and it feels smoother than it was, but it still cuts effectively for the final stages of tuning.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Swiss cut files vs diamond needle files
« Reply #8 on: May 15, 2020, 12:00:33 PM »

How interesting. I’ve had some bigger diamond files for a few years now and I don’t like them for tuning. Maybe the grit is too coarse. But they never feel like they are cutting in the way a steel file does. My current set of needle files need replacing so perhaps I should try some of these.

I found that the finer grit diamond files (600) worked much better than the coarser ones, but seemed to be much less common. Most of the ones online seem to be less than 200 grit.

The ones I have weren’t cheap, but the diamond coating seems to wear off sooner than I would have expected. I don’t believe I’m misusing them...?
I made the mistake of buying cheap diamond files, which didn't work at all for me. As with steel files, it pays to buy the best. I've had some DMT sharpening stones, in various grades, for quite a while, and they're still going strong after a lot of use, and have repaid the high initial investment. If I do persevere with diamond files, I'll be getting some of similar quality.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Swiss cut files vs diamond needle files
« Reply #9 on: May 15, 2020, 12:13:41 PM »

... But they never feel like they are cutting in the way a steel file does. ...

No - they won't. Steel files remove metal in a series of fine shavings, like wood plane shavings, but on a much smaller scale. A diamond file works by cutting a series of microscopic grooves - the wood equivalent of sanding.

I recall being told that master concertina maker Colin Dipper would never use diamond files on concertina reeds because (I believe) he thought that they would leave grooves which might serve as a focus for future fatigue cracks. However, I am fairly sure that is only a risk with coarse grit diamond files. It's possible Colin did not have the use of the fine grade diamond files available to us now. The very fine action of the 600 grit diamond files leaves a near-polished surface, rather than grinding. When you look at vintage concertina reeds which have only ever been filed with a steel file, they usually exhibit very noticeable grooves.

In conversation with David Elliott (respected concertina restorer and repairer; author of The Concertina Maintenance Manual), he now only uses diamond files for reed work.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Swiss cut files vs diamond needle files
« Reply #10 on: May 15, 2020, 12:19:39 PM »

The ones I have weren’t cheap, but the diamond coating seems to wear off sooner than I would have expected. I don’t believe I’m misusing them...?

My 600 grit file looks as though the coating has worn off and it feels smoother than it was, but it still cuts effectively for the final stages of tuning.

I periodically clean my diamond files using methylated spirit and a bit of scrubbing with a brass-bristled suede-cleaning brush. This seems to rejuvenate them if the action has slowed down a bit.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Swiss cut files vs diamond needle files
« Reply #11 on: May 15, 2020, 12:22:17 PM »

Agreed they do need cleaning.   I use a natural rubber block that I originally got for cleaning a belt sender.  It works well on the diamond files.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Swiss cut files vs diamond needle files
« Reply #12 on: May 15, 2020, 01:44:09 PM »

Oh! I didn’t realize they need cleaning!
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal