Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Plastic Valves  (Read 2082 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Plastic Valves
« on: May 15, 2020, 03:12:50 PM »

Does anyone here know what the specific type and thicknesses of 'film' or 'plastic' material are used to make accordion reed valves, and where they may be found? 'Vileda' is one term I have seen mentioned in relation to the yellow coloured film used on some chord reed plates but searching for it only turns up the well known brand of household cleaning products.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Plastic Valves
« Reply #1 on: May 15, 2020, 03:19:28 PM »

Yes that's used to replace leather valves, usually bass I think.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Valves
« Reply #2 on: May 15, 2020, 03:33:05 PM »

You'll end up with a lot of work, time spent experimenting and so on if you make your own valves.  They are cheap to buy ready made.  Personally I don't like the vileda valves, they always seem rather floppy.   There are several types of composite valves available which have a leather layer with one or more plastic layers on top which give a good combination of the quietness of leather with the additional springiness of plastic. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 246
Re: Plastic Valves
« Reply #3 on: May 18, 2020, 01:26:25 PM »

where can we try these composite valves? cgm? sounds interesting
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Valves
« Reply #4 on: May 18, 2020, 01:32:06 PM »

I get mine from Carini.  CGM doesn't list them.  This ebay seller is offering valves and the sets seem to include leather valves with plastic strengtheners.  You could contact them and see what else they have.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Plastic Valves
« Reply #5 on: May 18, 2020, 01:40:12 PM »

I’m curious - I’ve only ever used the plastic valves with the pre-punched holes. Is there any advantage or disadvantage to using the ones without holes? My thought was always that having the former meant there was more surface area for the valves to be glued onto the plate and were therefore more  desirable, but then again there are plenty of boxes without them...
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Valves
« Reply #6 on: May 18, 2020, 01:52:22 PM »

Punched valves seem to be favoured by Hohner, virtually all Italian makers use unpunched. I’ve never semi punched leather valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Plastic Valves
« Reply #7 on: May 18, 2020, 02:17:17 PM »

This ebay seller is offering valves and the sets seem to include leather valves with plastic strengtheners.  You could contact them and see what else they have.

The Ebay seller is OG Accordions, based in Bristol. Nice website and some good information. Judging by the 'Information' section I have a hunch that the business is run by a member(s) of this forum, or at least accesses this forum. Come on, own up...!

https://ogaccordions.com/
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Plastic Valves
« Reply #8 on: May 18, 2020, 03:11:07 PM »

I have done some research on valve design & manufacturing. One main advantage of perforated plastic valves is that the effective 'hinge' point for the valve is closer to the rivet allowing for more flexure and thus more air flow. I'm attaching photos of a valve test fixture with and without a valve and a second fixture that can accommodate a reedplate.

*edit* more flow means louder sounding to the ear outside of the instrument *edit*
« Last Edit: May 18, 2020, 08:07:24 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Plastic Valves
« Reply #9 on: May 18, 2020, 03:14:00 PM »

Scott, you've created some wonderful tools and toys...
Logged
C#/D player

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Plastic Valves
« Reply #10 on: May 18, 2020, 03:16:25 PM »

Here is a picture of the flow and low pressure gauges I used on the test platform. The unit is in a locked laboratory at my university at the moment so I can't provide a photo of the entire rig with blower and gauges.

I am developing a flex tester that uses a high precision laser to measure the actual deflection of the valve under controlled air flow. Much more detail will follow when it is all complete.
Logged
too many boxes...please buy one, or two, or

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 246
Re: Plastic Valves
« Reply #11 on: May 19, 2020, 02:42:23 PM »

yes og accordions of bristol looks good for valves. alas pretty much out of stock of valves at moment according to website. also found this place that does composite and other valves in various sizes https://www.accordionary.com/en/product/2024/reed-valves-leather-synthetic.html
based in netherlands. anybody know website for carini and if they do small orders?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Valves
« Reply #12 on: May 19, 2020, 02:45:08 PM »

Carinidena.com is Carini’s website.  I think they do fairly small orders,  you would have to contact them and ask.  They have good English speakers.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Plastic Valves
« Reply #13 on: May 19, 2020, 06:42:30 PM »

Carini plastic valves are cheap. Their leather composite plastic valves for bass work out a bit more expensive than the straight leather valves (which are pretty cheap, it has to be said). But the booster springs are quite expensive and I reasoned the total cost of leather valves, if you include the faffing around fixing on booster springs, is greater and less convenient than their leather/plastic composites (these are like CGMs bass valves except the soft bit is leather whereas CGMs is a synthetic material). I do a lot of PAs and time becomes a valuable commodity ... so a few pence more on valves with booster spring in place is actually ok in the grand scheme of things.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Plastic Valves
« Reply #14 on: May 19, 2020, 10:01:01 PM »

That's a very helpful run-through, Roger.
I'm finding fitting the booster springs a bit of a faff and I've been wondering about the comparative merits of pre-plasticked leathers.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Plastic Valves
« Reply #15 on: May 20, 2020, 01:49:39 AM »

I'm finding fitting the booster springs a bit of a faff...

The booster springs can be a bit of a faff but I find you get used to it. It helps to put a tiny bit of downwards kink with tweezers or small round-nosed pliers on the last few millimetres where the 'dot' will go. This ensures the spring will press the valve flat.

Here's the sequence of gluing which I use:
1. Glue the valve in place.
2. Put a tiny bit of glue on the kinked portion of the spring and press into place on the valve. This just helps hold it in position while you get the dot ready.
3. Put a bit of glue on the dot and press into place over the spring.

Quote
and I've been wondering about the comparative merits of pre-plasticked leathers.
I find they are excellent and indeed save a lot of faffing about. Castagnari use them all the time now, no worries.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 246
Re: Plastic Valves
« Reply #16 on: May 21, 2020, 12:58:55 PM »

Carini website of Italy looks great for valves and all kinds of other accordion goodies. huge choice. Here in the UK, OG accordions said very helpfully they will make up sets so i'll get a set from them first and see how that works out.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plastic Valves
« Reply #17 on: May 21, 2020, 03:02:00 PM »

Good plan. Valves from Carini typically come in minimum quantity of 100 for each size,  so you need to know that the valves you order are suitable for your intended use.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal