Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Fixing crack in bass side fondo (HA114)  (Read 2044 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Fixing crack in bass side fondo (HA114)
« on: May 17, 2020, 05:27:55 AM »

I have an older HA114 that has a crack in the bass side fondo that runs the entire length from top to bottom. The crack runs along the perimeter of the growl box, so it looks like it was dropped or struck at some point. Structurally it still feels pretty solid. Amazingly, masking tape along the inside fixes any air leaks 100% and the box is perfectly playable, however I’d like to carry out a more permanent repair. Any recommendations? I was thinking of glueing a strip of wood along the inside covering the crack, and/or a couple of wooden ‘braces’ running perpendicular to the crack that, when glued in place and clamped, which essentially suck the two pieces back together (the crack runs diagonally within the thickness of the wood). Pictures to follow.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #1 on: May 17, 2020, 05:32:06 AM »

Photo 1:
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #2 on: May 17, 2020, 05:34:54 AM »

Photo 2:
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fixing crack in bass side fondo (HA114)
« Reply #3 on: May 17, 2020, 08:05:16 AM »

That’s a shrinkage crack, which is ver common on older 114s where the fondo is solid timber. Later models were ply which prevents this.

If you glue timber over the crack make sure the grain runs across the crack, or use a strip of ply.  If the crack is wide enough and you can clean out the old glue then you could glue some veneer into the crack.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Fixing crack in bass side fondo (HA114)
« Reply #4 on: May 17, 2020, 08:53:38 AM »

Looking at Photo 1, someone has already tried to repair or fill the crack, either by running glue into it, or possiby wax. If the latter, you could be in for a difficult time as new glue won't stick to the previously waxed areas.  :(
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Fixing crack in bass side fondo (HA114)
« Reply #5 on: May 17, 2020, 09:33:33 AM »

Although it would mean losing the silver covering on the outside, I would have thought that it would be easier to just remove it and make a new one, using the old one as a pattern.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Fixing crack in bass side fondo (HA114)
« Reply #6 on: May 17, 2020, 10:18:24 AM »

Although it would mean losing the silver covering on the outside, I would have thought that it would be easier to just remove it and make a new one, using the old one as a pattern.
It would mean dismantling the entire end, as the fondo is housed and glued in a rebate groove in the end frame woodwork. Not an easy job, and you would risk doing more damage in the disassembly. Also you would have to remove and reassamble the bass and chord reed blocks, again with the risk of damage.

Far better to repair the exisiting fondo in situ, in my opinion.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Fixing crack in bass side fondo (HA114)
« Reply #7 on: May 17, 2020, 10:27:11 AM »

How I would resolve it = having fixed quite a few similar issues on stringed instruments and a Concertina with similar issues....

1) Clean the crack as best you can.

2) Use a piece of 'low-tack' tape on the 'silver' side to cover the crack.

3) Get some 'viscous'/thick Super Glue - cheap as chips on Ebay, I think it is predominantly a product used by window fitters ? and a 'pot' of Baking Soda / Bi-carb, cheap as chips at the super market.

4) Run a small amount of glue from the nozzle ( steady hand job ) "into" the crack then 'dust in' with the baking powder bicarb - from a tea-spoon works well.  You can be fairly generous with the bi-carb but only in respect of glue which has sunk into the crack.  It's not the end of the world if you get a 'hump' but it is best left as level as possible for stage (6) Dust/vacuum/blow off excess 'powder' as you go .....check crack, repeat as necessary, until level or slightly 'proud'.

5) Do it in a ventilated area  :o but don't be too paranoid.....
 
6) Carefully sand/scrape down any excess from the 'wood' side, remove tape from the silver side.  It goes 'off' almost instantly, although it makes sense to leave it a little while.

7) You could use the 'ordinary' / thin superglue at a push, but it runs like water and doesn' build/bridge as well.

The Glue and Bicarb has "created" a plastic filler and a bond , which is stronger than the wood will ever be.  I used it first on cracked motorbike fairings - thinking it was just another of those Internet 'blags', but have since used it on quite a few instrument based projects.

I have a feeling, from something I half read, that "high end" guitar makers and woodworkers use it as a final surface filler on their projects.
« Last Edit: May 17, 2020, 10:32:12 AM by Nigel.H »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fixing crack in bass side fondo (HA114)
« Reply #8 on: May 17, 2020, 10:37:49 AM »

I’ve used the baking soda and superglue method too, very effective.  I donut the other way round fill the gap with bicarbonate then apply a thin runny grade of superglue. This avoids getting glue and bicarbonate grapes up over the crack.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Fixing crack in bass side fondo (HA114)
« Reply #9 on: May 17, 2020, 12:20:17 PM »

How about a thin ply on the outside covered with the same silver finish? Then put the growl box back on and it would look as good as new if the cover was carefully fitted.
Logged
Old Paolo Sopranis in C#/D and D/D#

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Fixing crack in bass side fondo (HA114)
« Reply #10 on: May 17, 2020, 01:14:36 PM »

"in my opinion"

Of course! And all of which are of equal value when offered in the light of personal experience.

With the willingness to delve into the workings of the instrument this far, I would imagine that knocking up a couple of (very simple) new bass-end reedblocks wouldn't be beyond the OP's skills.

As far as stripping and rebuilding the end casework, a decent wood chisel and a lack of fear is the trick, in my opinion.

Mind, I wouldn't advise this sort of experimentation on a box costing many hundreds of pounds!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Fixing crack in bass side fondo (HA114)
« Reply #11 on: May 17, 2020, 03:38:35 PM »

"in my opinion"

Of course! And all of which are of equal value when offered in the light of personal experience.

With the willingness to delve into the workings of the instrument this far, I would imagine that knocking up a couple of (very simple) new bass-end reedblocks wouldn't be beyond the OP's skills.

As far as stripping and rebuilding the end casework, a decent wood chisel and a lack of fear is the trick, in my opinion.

Mind, I wouldn't advise this sort of experimentation on a box costing many hundreds of pounds!

In an odd way, I find myself sympathetic to both sides of the question; yes, from a purely pragmatic point of view strip out, replace and rebuild is the obvious path if you simply want to make a reliable, playable instrument. But the restorer in me (of furniture, musical instruments of all kinds and historical marionettes) wants to conserve as much of the original fabric as possible. There's not a lot of difference in the amount of work either way, though the tasks involved would be very different, but for me - and this is a purely personal standpoint - I'd go out of my way to preserve the original timber.  I don't think the cost (or value - not necessarily the same thing!) of the instrument is relevant, frankly; it's the history, the personality, the indefinable "selfness" of an old instrument that deserves to live on.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #12 on: May 17, 2020, 04:16:43 PM »

Thanks for the all the suggestions. Like GPS, I prefer to keep things as original as possible. I don’t see any reason to build new components for this, and repairing the original piece of wood seems fairly straightforward enough. As I mentioned earlier, a strip of masking tape on the inside was enough to make the instrument perfectly playable with no air leaks, so anything up from that could only be an improvement. My concern was never *if* I could repair the existing fondo but rather which method might be best.

Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Fixing crack in bass side fondo (HA114)
« Reply #13 on: May 17, 2020, 06:58:22 PM »

There's a little bit of staining around the crack. Have you established if this is wax or previous glue repairs?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #14 on: May 17, 2020, 07:31:54 PM »

There's a little bit of staining around the crack. Have you established if this is wax or previous glue repairs?

It was wax that someone had used to seal up the crack. I scraped most of it off.
Logged
C#/D player

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Fixing crack in bass side fondo (HA114)
« Reply #15 on: May 17, 2020, 07:58:40 PM »

There's a little bit of staining around the crack. Have you established if this is wax or previous glue repairs?

It was wax that someone had used to seal up the crack. I scraped most of it off.

Mmmm. not the greatest news. Not insurmountable, but not ideal either......... you do have a good magnifier and a very sharp scalpel?   (:)
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Fixing crack in bass side fondo (HA114)
« Reply #16 on: May 17, 2020, 09:15:36 PM »

There's a little bit of staining around the crack. Have you established if this is wax or previous glue repairs?

It was wax that someone had used to seal up the crack. I scraped most of it off.
In that case I'd scrape it as clean as possible and degrease the area with some acetone or any solvent that will dissolve wax.
I'd use some very thin plywood (I've got some 1.5mm) and cut strips about 20mm to 1" wide. I'd work some PVA glue onto the split with a small brush then push down the ply over the split covering as far as possible an even amount each side. There should be just enough glue to ooze out.
Rub and slide this ply a little to squeeze out as much glue as you can and it will "grab". Then it can be left while the glue cures a bit and before it sets rock hard the excess glue can be trimmed off while it's "green".
I wouldn't worry about doing one long strip, short ones would work as well, and the small gaps between lengths being painted over with PVA if needed.
 
Edit
If I'd hadn't been for the wax, I'd have gone for the super glue. A much more satisfactory, elegant and less intrusive method.
« Last Edit: May 17, 2020, 09:22:54 PM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #17 on: May 17, 2020, 10:36:17 PM »

The old wax is really that big a deal? Even if the crack is getting filled with baking soda and superglue?
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fixing crack in bass side fondo (HA114)
« Reply #18 on: May 17, 2020, 10:51:59 PM »

Incidentally, re-reading my earlier comment regarding my intention of fixing the existing fondo, I realize it may have come across as rather arrogant - it wasn’t intended as such! I simply meant that I figured there would certainly be a way to patch up the original piece of wood. Cosmetics, in this case, are not really a concern, as most of the exterior crack is covered up by the growl box anyway, and I don’t mind these old Hohners showing off their battle scars ;)
Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Fixing crack in bass side fondo (HA114)
« Reply #19 on: May 17, 2020, 10:52:23 PM »

The old wax is really that big a deal? Even if the crack is getting filled with baking soda and superglue?
See what I wrote previously...

Looking at Photo 1, someone has already tried to repair or fill the crack, either by running glue into it, or possiby wax. If the latter, you could be in for a difficult time as new glue won't stick to the previously waxed areas.  :(
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal