Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Chattery springs fix success!  (Read 1495 times)

0 Members and 1 Guest are viewing this topic.

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Chattery springs fix success!
« on: June 13, 2020, 06:09:17 PM »

I just picked up a used Saltarelle Connemara III B/C in amazing condition, previously owned by Melnet member ceemonster.

When she sold it to the guy I bought it from, it sat un-played by the new owner for several years. He intended to learn to play, but never did.

After playing it for several hours, I noticed a bit of spring "chatter" developing on a few buttons on the C row so I started searching for fixes here on the message boards.

I isolated the issue to friction between the spring ends and their metal anchor slots (the opposite end from where they attach to the button lever).

Researching fixes here, I found the suggestion by many to use a mix of key lock graphite and Tri-flow dry lubricant.

I applied some to the offending slots with a tiny paintbrush, moving the spring end around to help disperse it.

It seemed to fix the issue initially, but the chatter would come back after a few hours. Hmm...

After a couple of failed attempts with the graphite/Tri-Flow, I saw someone here had suggested to strip some wire insulation and use that over the end of the springs in the slots to isolate them from rubbing against the metal slots.  So, I did exactly that.

That appears to have fixed the issue (so far), and is easily reversible if required. 

As several other keys on the C row were starting to exhibit the issue, I went ahead and did the same treatment to all the keys on the row. The B row and the half row don't seem to have the issue on any button, so leaving those springs alone for now.

Thank you to whoever made that suggestion!

I guess if I ever want to revisit the fix, I could look at smoothing the slots with a toothpick and some emery cloth. Unclear what the root cause is. No sign of any rust or moisture issues on the instrument, maybe it's just some surface corrosion. Perhaps if I gave the original graphite/Tri-flow treatment some more time, it would have cleared the issue in a few days/weeks. Who knows, just glad to have all the buttons nice and quiet now!  Fingers crossed!  (:)

« Last Edit: June 14, 2020, 05:56:15 PM by Michael Eskin »
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Chattery springs fix success!
« Reply #1 on: June 14, 2020, 12:42:50 PM »

Sounds like you've found a long-term fix, but I'd suggest scrupulously cleaning the graphite off.  If I remember rightly, Tri-flow is a dry PTFE lubricant.  The particle size is minute and probably insignificant, but the graphite (although a fine dust) is likely to migrate and could well cause problems later should it get to the reed slots.

I don't know the geometry of the spring anchor point, but if suitable another option might be to line the groove with thin PTFE sheet.

Not familiar with the coil springs concerned, may I ask whether the last coil is closed and ground flat?  I realise that there are many springs in a box but I was thinking of similar problems arising in airgun springs.  To get best performance and reduce noise, the last coil should be heated red hot and closed to the next coil.  Once cool, the spring is held vertical and ground flat to give it a flat bearing surface (ensuring the load is applied along the axis of the spring).  Many air rifle tuners also use some form of thrust bearing under the spring end sometimes as simple as a shim of PTFE sheet.  This all helps to accommodate the spring's need to spin as it extends and prevents metal to metal contact producing noise.  It would take an age to make a set of such bespoke springs, though, so isn't really a viable option - unless your name is Briggs...  Mind you, such springs in an airgun also have close fitting internal Delrin guides and "top hat" seats.  Actually if you wanted to go a bit overboard a Delrin seat would suit - a sort of cup with a pip in the centre to fit in the spring.

Nah, life's too short...

Rob.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Chattery springs fix success!
« Reply #2 on: June 14, 2020, 01:24:12 PM »

Do you really mean coil springs? I've never seen them on a Salterelle. They usually employ hairpin type springs.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Chattery springs fix success!
« Reply #3 on: June 14, 2020, 02:25:50 PM »

I,ve used the "quick fix" wire insulation trick over 6 years ago - still OK.

The bottom end of the hairpin type spring was digging in to the metal groove and causing a creak and a judder. I,m sure there are other solutions but this was a quick and easy fix and has lasted really well so far!      Stay safe -  John
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Chattery springs fix success!
« Reply #4 on: June 14, 2020, 04:35:45 PM »

Do you really mean coil springs? I've never seen them on a Salterelle. They usually employ hairpin type springs.

Yes, I mean hairpin type springs, like a safety pin, wasn't sure on the naming conventions.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Chattery springs fix success!
« Reply #5 on: June 14, 2020, 05:58:16 PM »

I,ve used the "quick fix" wire insulation trick over 6 years ago - still OK.

The bottom end of the hairpin type spring was digging in to the metal groove and causing a creak and a judder. I,m sure there are other solutions but this was a quick and easy fix and has lasted really well so far!      Stay safe -  John

Glad to hear!  Seems to be endemic on this box, just when I think I'd found them all, another would start chattering, so I did the same trick to all the spring ends. Maybe in the future I'll look into the PTFE strip in the grooves idea and ditch the wire insulation.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Chattery springs fix success!
« Reply #6 on: June 14, 2020, 06:13:25 PM »

Sometimes just shifting the spring leg to the other side of the notch is enough to silence the noise.

Referring to a few posts back about graphite.  I don’t think there is even a small risk of graphite particles stopping reeds.  Powdered graphite has very tiny grains, and the material itself is very soft.  If used it fir years to lubricate action joints and never been aware of any problem.  If you mix it with alcohol and apply it with a fine paintbrush you can place it very accurately, and years later the black mark it makes  is still in the same place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Chattery springs fix success!
« Reply #7 on: June 15, 2020, 11:24:46 AM »

That's good to hear, Theo.  I was just meaning to advise the OP to be cautious, but apparently no need!  In fact, as the springs are of a completely different type my ramblings are of no use whatever - some things never change.

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal