Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Field Repairable Reed Blocks..  (Read 5241 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Field Repairable Reed Blocks..
« Reply #20 on: June 18, 2020, 04:33:35 PM »

A CNC mill (or router) would knock these out nicely, with a range of possibilities for materials: Aluminium and nylon, for a start. Nylon tends to move away from the cutter, but I don't thing these would need to be that precise.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #21 on: June 18, 2020, 04:41:46 PM »

This might be an example of the cost of the fix being greater than the money saved buying cheap.

I've had expensive and now I have cheap. Expensive is no guarantee that you'll get good after sales service, trust me.

If the valves haven't arrived by tomorrow I'll order them from from CGM. It's simple job and I can attach them myself, I already have the craft knives, cutting board, solvent based glue on order.
Logged

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #22 on: June 18, 2020, 04:54:27 PM »

  Injection moulded plastics should be able to offer cost savings over wood,


Only for very large production runs of identical parts because the moulds are so expensive

Use 3D printing?
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Field Repairable Reed Blocks..
« Reply #23 on: June 18, 2020, 05:06:09 PM »

  Injection moulded plastics should be able to offer cost savings over wood,


Only for very large production runs of identical parts because the moulds are so expensive

Not disagreeing with you Theo because commissioning skilled machining work is expensive. But I have to share this:

A friend and co-worker of my father's once showed me a board game that *his* father had made in a home shop (probably in the 1940s or 1950s ).  It had little game pieces in the shape of foxes, injection molded out of beautifully colored plastic. His father had bought or made an injection molding set-up and had carved out the 2 piece molds from aluminum, using dental drills.

Making those molds required him to 1) sculpt the pattern as a reference, maybe with wax or maybe carved out of something more durable, but designing it to enable molding with the fewest separate mold parts, then 2) start drilling the molds and 3) make a lot of trial injected prototypes as shaping the molds progressed, comparing them to the pattern and being careful not to overshoot.

The father used to make and sell these little board games, based on the concept of a "Foxes chasing foxes" chase. The charming molded fox gamepieces were really the selling point. The production runs were pretty small and because the maker was such a skilled machinist, he was successful. But he did say that the mold making was the trickiest part of producing these games.

Time-consuming and exacting work to make those molds, but the expense in materials was low.

PG
« Last Edit: June 18, 2020, 05:12:05 PM by pgroff »
Logged

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #24 on: June 19, 2020, 09:41:08 AM »

You design and make a reed block in two parts from the off. These blocks look like they were made in two parts and then joined together.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Field Repairable Reed Blocks..
« Reply #25 on: June 19, 2020, 09:55:59 AM »

You design and make a reed block in two parts from the off. These blocks look like they were made in two parts and then joined together.
The image is of two separate blocks (Hohner Bass and Chord blocks). They both have reeds on the side you can't see.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Field Repairable Reed Blocks..
« Reply #26 on: June 19, 2020, 10:12:05 AM »

You design and make a reed block in two parts from the off. These blocks look like they were made in two parts and then joined together.
The image is of two separate blocks (Hohner Bass and Chord blocks). They both have reeds on the side you can't see.

I think what Bob means is that the chord block has a divider running down the middle which would seem to indicate that the block was made in two parts.
As a reedblock maker I can say that this is not the case.
The reed chambers are glued to the divider on on side then the block is flipped over to glue the chambers onto the other side, so it is therefore made in one piece.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #27 on: June 19, 2020, 11:02:22 AM »

You design and make a reed block in two parts from the off. These blocks look like they were made in two parts and then joined together.
The image is of two separate blocks (Hohner Bass and Chord blocks). They both have reeds on the side you can't see.

I think what Bob means is that the chord block has a divider running down the middle which would seem to indicate that the block was made in two parts.
As a reedblock maker I can say that this is not the case.
The reed chambers are glued to the divider on on side then the block is flipped over to glue the chambers onto the other side, so it is therefore made in one piece.

I feel like we're getting close. So is it possible to make them as two discrete parts that can be locked together then fitted in the box, but can be opened for "servicing"?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Field Repairable Reed Blocks..
« Reply #28 on: June 19, 2020, 11:09:05 AM »

There would have to be three parts as mentioned earlier.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #29 on: June 19, 2020, 11:36:15 AM »

There would have to be three parts as mentioned earlier.

But couldn't that just be a simple gasket of some kind?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Field Repairable Reed Blocks..
« Reply #30 on: June 19, 2020, 12:05:27 PM »

There would have to be three parts as mentioned earlier.

But couldn't that just be a simple gasket of some kind?
If you mean a 'simple gasket' to separate the two halves of the reed block, then I don't think that would work very well. A reed block needs to be as rigid as possible to prevent damping of the pulses of energy generated by the vibrating reed tongues, and to stop unwanted acoustic coupling between adjacent reeds.

A non-rigid divider between the two halves of the reed block would almost certainly result in these unwanted effects, and any distortion or changes in volume (capacity) of the reed chambers would affect the tuning. Even small pitch changes will play havoc with the tremolo frequency.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Field Repairable Reed Blocks..
« Reply #31 on: June 19, 2020, 12:22:32 PM »

There would have to be three parts as mentioned earlier.

But couldn't that just be a simple gasket of some kind?

The three parts you would need are set of reed chambers for each side and a central divider you would then need two gaskets.   You also have to work out how to keep the base of the block perfectly flat to make an airtight joint to the fondo.  That might entail dry dowels between the three parts to ensure alignment, or a removable base plate?    The time it takes you to design and construct all that would be much better spent learning how to do the job as it exists. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Field Repairable Reed Blocks..
« Reply #32 on: June 19, 2020, 12:42:35 PM »

`
   The time it takes you to design and construct all that would be much better spent learning how to do the job as it exists.
[/quote]

And presumably add to the complexity and therefore cost of reed block manufacture. In the hundred and something years since the invention of accordions their manufacture and repair has been constantly refined and repair techniques are well understood by people who repair them, admittedly you have to learn them, but once learnt its fairly straightforward, if a little fiddly till you gain the necessary expertise. Why reinvent the wheel !!!  :D :D
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Field Repairable Reed Blocks..
« Reply #33 on: June 19, 2020, 04:52:23 PM »

It’s really easy to get at and maintain reeds on existing reed blocks. You can even do it without taking them out of the instrument. It takes a bit of time to learn the techniques but it ain’t hard once you know how. Obvs a discussion about reed block construction  is always interesting, but a block which opens up for ease of ‘maintenance' is (in my view) a solution looking for a problem. And FWIW you do get injection moulded reed blocks in some modern accordions.

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #34 on: June 19, 2020, 09:03:28 PM »

I've had a couple of "underachieving" bass notes due in part to the tip of tenor reeds being too close to the plate, easy to fix. It also looks like the inside valves on these notes are too long and are touching the block. In my reality I'd undo a few screws, trim the offending valves and then reassemble.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Field Repairable Reed Blocks..
« Reply #35 on: June 19, 2020, 11:28:16 PM »

There have been quite a few discussions here about reed block design, some being most ingenious and which would allow just what you say.  They have generally involved clamping the plates in place either as a group or individually, but of course it would add significant production costs For a clamped reed to form an effective, long-term seal is precision engineering compared to waxing the plates to a wood assembly.

Rob.
Logged

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #36 on: June 20, 2020, 12:27:46 PM »

There have been quite a few discussions here about reed block design, some being most ingenious and which would allow just what you say.  They have generally involved clamping the plates in place either as a group or individually, but of course it would add significant production costs For a clamped reed to form an effective, long-term seal is precision engineering compared to waxing the plates to a wood assembly.

Rob.

The plates can be remain as they are, it's having an easy access to the inside reeds that I'm interested in. The high quality instruments will always be made in the traditional way, and at a price, but at the lower end there's a cost and ease of ownership to consider.
The small adjustments that I've been able to make as a novice have improved my instrument and my enjoyment. If a larger but accessible reed block made the box a little heavier, that could be a weight I could bear.

Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Field Repairable Reed Blocks..
« Reply #37 on: June 20, 2020, 02:51:38 PM »

The plates can be remain as they are, it's having an easy access to the inside reeds that I'm interested in.

Judging by your earlier photos, the reed block chamber dividers have plenty of room for screwed or nail fixings.
Why not just do away with the waxing and simply screw your reed plates directly in place on to Olovisc gaskets. It's a simple and recognised technique and works very well. You don't need wax at all. To flip the reeds for access to the inside valves, all you need do is release the screws a couple of turns.

See attached photo of my one-row treble reeds. The olovisc is the thin pale brown stuff on top of the reed chamber dividers.

Olovisc gasket is readily available from Charlie Marshall and it is very easy to cut into strips and apply. It is self-adhesive. Just peel off the backing paper and press the strips into place. You will need to drill pilot holes for your screws in the reed chamber dividers first. Fix the olovisc on top and then just prick through with a with a sharp pointy thing to allow the screws to penetrate into the pilot holes. 


Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

BobM

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 310
Re: Field Repairable Reed Blocks..
« Reply #38 on: June 20, 2020, 04:29:20 PM »

Hi Steve,

Many thanks for the Olovisc info. It could be a good solution for me at the current time, because because I only really want to fix a few duff notes and crack on with the newbie practice. The instrument is better than I am as a performer, but the nasty F basses have been a big distraction..

Bob.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Field Repairable Reed Blocks..
« Reply #39 on: June 20, 2020, 05:57:39 PM »


Why not just do away with the waxing and simply screw your reed plates directly in place on to Olovisc gaskets.


Does it stick, easily,  to surfaces that have been waxed?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal