Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stripped box nail  (Read 1220 times)

0 Members and 1 Guest are viewing this topic.

Randal Scott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 399
  • Detroit MI
Stripped box nail
« on: June 19, 2020, 09:29:55 PM »

So, how does one approach extracting a nail (connecting the bellows) after the head has been stripped off?  The only thing I can think of is to drill it out..   :'(
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Stripped box nail
« Reply #1 on: June 19, 2020, 09:41:43 PM »

If it's a bellows pin, it usually goes right through the case, so it can be knocked through with a pin punch, or even a nail of the appropriate diameter.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Stripped box nail
« Reply #2 on: June 19, 2020, 10:03:38 PM »

If it's a bellows pin, it usually goes right through the case, so it can be knocked through with a pin punch, or even a nail of the appropriate diameter.

SJ
What he said ^^^^^^^^

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Stripped box nail
« Reply #3 on: June 19, 2020, 10:24:54 PM »

Punch it. -  If you try to drill it, the drill will skate off the pin into the wood making a mess.
 I,ve done it (luckily on an old scrap box)  Good luck,  John.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Stripped box nail
« Reply #4 on: June 19, 2020, 11:28:26 PM »

You might try holding a hot soldering iron on it for a couple of minutes before trying to drive it through.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Randal Scott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 399
  • Detroit MI
Re: Stripped box nail
« Reply #5 on: June 20, 2020, 12:12:54 AM »

Ah!  Excellent.  Thank you(s).
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Stripped box nail
« Reply #6 on: June 20, 2020, 12:55:17 AM »

So, how does one approach extracting a nail (connecting the bellows) after the head has been stripped off?  The only thing I can think of is to drill it out..   :'(

I have been there (once)....after failing to punch the pin through I got a piece of 1/8th inch brass pipe ( model shop material) cut off a 2inch length, and cut (junior hacksaw and file) a notch/sawtooth profile in the end. I then used this (carefully) as a core drill to remove the pin. I later made the hole good with plastic wood and redrilled the hole for a new bellows pin.
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Stripped box nail
« Reply #7 on: June 20, 2020, 08:57:30 AM »

The core drill approach is a good one for a terminally stuck pin. If you make them from hard(ish) steel, they will also cut down the pin head, (most stuck pins are intact). Dental trephines are an elegant if costly alternative. The second advantage of core drilling is that it leaves a nice neat hole to plug with a fine custom turned wooden dowel, prior to re-drilling the pin holes. I would avoid plastic wood, it kind of works but is prone to crumbling after several pin removals.
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Stripped box nail
« Reply #8 on: June 20, 2020, 09:28:14 AM »

If there was any head at all I would go for the hot soldering iron until I got the first whiff of burning wood then pull with a small set of pliers.

I used the brass pipe for availability of material and limited tools on hand to make my core drill. 

Logged

Frank Pallister

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Stripped box nail
« Reply #9 on: June 20, 2020, 09:45:01 AM »

if all the other suggestions fail ,take the other end of the box off and see  if the broken pin protrudes inside and it may be possible to push it back out , i have never done it but it might work in theory !
Logged

MácA

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Stripped box nail
« Reply #10 on: June 20, 2020, 12:05:55 PM »

Even if a tiny sliver of metal is protruding, you could try attempt bonding a small piece of wood to it with epoxy and pulling up the wood with the nail adhered to it, like a corkscrew in a wine bottle.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Stripped box nail
« Reply #11 on: June 20, 2020, 03:06:21 PM »

Even if a tiny sliver of metal is protruding, you could try attempt bonding a small piece of wood to it with epoxy and pulling up the wood with the nail adhered to it, like a corkscrew in a wine bottle.

If the bellows pin has anything like normal friction, I doubt there would be enough gluing area for that to be successful. The glued join would just shear away immediately any upward pulling force was applied. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Stripped box nail
« Reply #12 on: June 20, 2020, 03:50:12 PM »

if you can take out the rest of the pins, you can push the bad one out from inside of the bellow, by using any long metal tool and hammer right opposite side, a few gently touch from inside of the bellow will give you enough length to hold and full it out..if you can see the pins from inside that is  (:)     
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal