Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Celluloid Crack Fusing Repair  (Read 6438 times)

0 Members and 1 Guest are viewing this topic.

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Celluloid Crack Fusing Repair
« on: June 21, 2020, 09:29:17 PM »

Hi All,

I own a blue paolo soprani accordion that I was lucky enough to spot in Australia many years back. My only peeve with it is that when I got it shipped from Australia it arrived with a mighty crack on one side, and the front of the cabinet was literally hanging off it was that bad. Luckily I know a very good guitar luthier locally who was able to professionally repair the crack. He cleaned and applied wood glue and clamped it together to fix it. He wasn't able to fix the celluloid though. I subsequently had the box professionally tuned and given a once-over in Ireland and it is a great player now, although I'm still not happy with the celluloid crack. I've attached pictures of how the box currently looks.

I've searched the forum and can't specifically find topics on fusing celluloid together to fix a crack. Although I've been giving it a lot of thought and came up with this game plan:

- Use a stanley knife to remove the crack by cutting 1/4" either side of it and removing that strip of celluloid.
- The back plate of the fingerboard is luckily covered with the same blue celluloid so I will use that as my repair material (I've seen a lot of paolos with bare aluminium back plates so I'm not concerned about this affecting the originality of the box). I will attempt to remove this celluloid - possibly with a hair dryer and somehow peel it off with a paint scraper of sorts?
- Cut a strip of the salvaged celluloid to fit the crack or slightly bigger to allow for shrinkage.

**This is the stage where I'll need some suggestions from the forum**
Should I soften the strip with 50/50 pure acetone/water to get the right curvature and then glue it in place? How can I fuse the existing celluloid to the strip? I understand that I'll probably never have it looking perfect but I would sand down and polish any roughness to get it looking as good as possible.

Any advice would be greatly appreciated! Thanks.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

hallelujahal

  • Member
  • *
  • Offline Offline
  • Posts: 46
  • 'Blood & Fire'
Re: Celluloid Crack Fusing Repair
« Reply #1 on: June 21, 2020, 10:00:00 PM »

I don’t have an answer except to say please be careful as the celluloid is extremely flammable!
Al
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Celluloid Crack Fusing Repair
« Reply #2 on: June 21, 2020, 10:12:25 PM »

Celluloid is tricky stuff to repair,  you have to understand it's properties to make a successful repair, and people who have the skill can make unbelievably good and almost invisible repairs.  I have attempted a few repairs, but never really been happy with the results.  Shops who repair piano accordions are where the really skilled celluloid repairs seem to be.  I suggest contacting all the PA shops you can find and see what they can do.

Some things I have learned that may help if you try to tackle it:

1 a good adhesive can be made by dissolving celluloid in 100% acetone. It can be a slow process, cut up any scrap celluloid and drop it into a container that can be sealed so that the acetone doesn't evaporate and be prepared to leave it for a week or two to soften and dissolve.

2 make the adhesive with scraps of the material you use for the repair and it will then act as an invisible joint filler.

3 when the celluloid is softened it will, stretch easily so your patch could end up narrower than the gap.

4 once in place the patch takes a long time (couple of weeks) to fully harden before the surface can be scraped flat and polished. 

5 consider looking up marquetry skills for hints about matching the patch to the hole.

Good luck
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Celluloid Crack Fusing Repair
« Reply #3 on: June 22, 2020, 03:12:20 AM »

I agree with what Theo says about acetone.  My "less is more" mind wonders if the cracks can be brought to full "adjacency" and "welded" with acetone or acetone and dissolved celluloid.  In other words, can the cracked parts be taped together and solvent welded, leaving the much smaller "diamond" chunk to be actually patched?  One might use tape across the cracks, leaving  gaps, and "tack" the un-taped, and then remove tape and repeat on the other gaps. If that works, it saves a lot of the "marquetry" and retains more of the original, and it might be especially nice to avoid a larger patch on compound curves.  Also might mean you could find a small piece of the right blue without taking that whole backing plate away, or you could make some sort of intentional-looking emblem or badge for the spot from which you take the graft.

I echo the concerns about flammability, and acetone is "wicked toxic" to boot.  But, it's the stuff, unless somebody has a better way.

By the way, we are talking about the very first "plastic" if memory serves.  Very nice material, to my way of thinking.  Invented to make billiard balls, when ivory got pricey in the late 19th century.  Saved many a tortoise....
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Celluloid Crack Fusing Repair
« Reply #4 on: June 22, 2020, 03:40:34 AM »

Thanks for the detailed replies - that helps a lot! I do have a hohner black dot with a similar crack that I'm thinking of doing a trial on first before actually touching the paolo. The hohner is eventually destined to be a french polished brown box so it won't be a sacrifice.

I like the idea of making a paste out of the celluloid/acetone mix to fill the cracks. Only problem is there's some wood glue residue in the cracks which I'll have to carefully remove before I fill them up. When you say "invisible joint filler" do you mean that the edge of the repair won't be as noticable?

So if I apply the paste to the cracks will the adjacent material fuse with the new celluloid when all the acetone eventually evaporates? That would be ideal! I was also thinking of instead of cutting straight lines to have a kind of random edge pattern so it wouldn't be as noticeable with the underlying random celluloid pattern.

Re: "Wicked Toxic". I was looking on wikipedia and Acetone is said to "exhibit only slight toxicity in normal use". It certainly doesn't smell nice so I'll be doing all my work in a well ventilated area with breathing, skin & eye protection anyway.

First port of call will be PA repair shops as per Theo's advice. I definitely don't want to screw this one up. No rush - plenty of time to get this job done.

Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Celluloid Crack Fusing Repair
« Reply #5 on: June 22, 2020, 05:55:50 AM »

I once glued a broken bass plate back together, filled the joins in and got a better than expected finish with car body paint. I think the cracks and the patch could  be disguised well enough with paint then coated with clear laquer and polished.
   Maybe you should try that first and keep the celluloid as a last resort?
 I,ve always found it a nightmare to work with! -  but good luck anyway,    John
     PS. Heat makes it ripple like mad! (celluloid)
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Celluloid Crack Fusing Repair
« Reply #6 on: June 22, 2020, 06:28:29 AM »

Kimric Smythe is the expert on celluloid repairs around here, and Theo. My repairs are not that great and certainly never invisible. I’ve just been repairing the corners of a PA. If you can get some celluloid to match or near match the hole, here’s how I soften it. Get a foil takeaway tray with lid (you can buy these in a kitchen shop) and cut up the bottom of a second one, making holes in it, and sit it upside down in the first, so you have a raised platform. Put a mm or two of pure acetone in the foil tray, then put your piece of celluloid on the little raised platform and put the lid on and leave for an hour. After that the celluloid will be like a piece of rubber and you'll be able to cut it with scissors to the desired shape. You can 'glue' it in the hole using nail varnish of the same colour. Using a 'wet' finger of acetone you can also blend in the crack, though this sounds easy but isn’t. It can thin the celluloid and you end up with a bigger hole. Or Theo's dissolved celluloid is the way to make a glue paste and/or fill with layers of nail varnish. And leave to cure for a few days. The trick, it seems to me, is to get lots of practice on something else less important. When you've done all that and let it cure for a week or so, you can work it with glass paper, wire wool and, eventually, T Cut (car paint restorer) to get a mirror finish. PS..good luck with trying to find a matching nail varnish...I had to explain to the cosmetics demo lady 'this isn’t for me, you understand....though of course if it was, that’s cool' (channelling the Dude at that point). Then I explain what it’s really for and get an even more puzzled look.
« Last Edit: June 22, 2020, 06:33:56 AM by RogerT »
Logged

Frank Pallister

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Celluloid Crack Fusing Repair
« Reply #7 on: June 22, 2020, 10:33:33 AM »

unless you have years of experience working with celluloid dont even think about it ! you need to make it less visible and that can be done with blue paint and when that is dry filling with super glue which may take a few layers to build up  keep it simple , cutting it out will make it more noticeable  , it could be made like new by a pro but at the cost of a new soprani  !
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Celluloid Crack Fusing Repair
« Reply #8 on: June 22, 2020, 10:37:55 AM »

Agreed Frank especially that paint is not the way to go.  And just filling the cracks with celluloid paste will also be obvious because it will break up the pearloid pattern.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Celluloid Crack Fusing Repair
« Reply #9 on: June 22, 2020, 02:55:14 PM »

and that can be done with blue paint and when that is dry filling with super glue which may take a few layers to build up  keep it simple .
Totaly agree  -  try this out on an old junker a couple of times first so you know what to expect.
 Too much superglue on top of the paint can look really rough at first - drips and runs etc.
 but it can be polished out to a decent finish if you have the patience.
       Practice,practice practice....        Good luck,     John.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Celluloid Crack Fusing Repair
« Reply #10 on: June 22, 2020, 06:03:00 PM »

Just out of curiosity I did a quick experiment with 2 bits of thin (1mm) celluloid and a stick.
 No prep or soaking or fuming. Put the two triangles face down first, then just dipped my finger into 100% acetone and rubbed back and fore over the join.  Repeated  and while still tacky turned the two parts (now stuck together ) over and pressed onto a lolly stick.  Stuck OK.
  Dipped my finger into the acetone and rubbed over the face side join. This definately made the join  less obvious,  and after a polish I think this would be perfectly OK for a small repair.
    I would be very nervous about splashing acetone about over a valuable box though, or indeed paint and superglue. Still - no pain, no gain.  I was very surprised at how well this went though.
  (And no mess, unlike my last attempt at softening celluloid ☹)
                      John.
« Last Edit: June 22, 2020, 06:12:24 PM by JNM SY »
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Celluloid Crack Fusing Repair
« Reply #11 on: June 22, 2020, 07:21:02 PM »

I like the idea of nail varnish. A quick google image search shows an infinite number of blue shimmer ones in different shades of blue. I'm going to experiment by trying to fill the hole on the backplate with a matched nail varnish. When it dries - superglue over the top to give it the "depth" that's in the celluloid. Then a polish.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Celluloid Crack Fusing Repair
« Reply #12 on: June 22, 2020, 07:49:36 PM »

Turks made it very simple  (:)  many more videos on yuotube  look for '' Sedef Kaplama Nasıl Yapılır '' it might help
https://www.youtube.com/watch?v=lYrWik1CaBM
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Celluloid Crack Fusing Repair
« Reply #13 on: June 22, 2020, 07:59:13 PM »

Turks made it very simple  (:)  many more videos on yuotube  look for '' Sedef Kaplama Nasıl Yapılır '' it might help
https://www.youtube.com/watch?v=lYrWik1CaBM

Wow maybe I can ask that gentleman to re-wrap my accordion? Might be the easier option :) So much for health and safety - he's liberally applying the acetone by hand.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Celluloid Crack Fusing Repair
« Reply #14 on: June 22, 2020, 10:09:04 PM »

you can always ask  (:) he wouldn't say NO if you can post your accordion..50/50 mix he is using and don't forget this stuff also used to remove nail polish,it wouldn't harm your hand /skin..I use pure acetone bath to clean my reeds al the time still alive  ;D     
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Celluloid Crack Fusing Repair
« Reply #15 on: June 22, 2020, 10:30:47 PM »

I am so relieved to be wrong about toxicity of acetone!  I'll still vent, and keep away from flames, but otherwise, sounds like much gentler to us humans than I "knew.". ....Thanks!

David
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Celluloid Crack Fusing Repair
« Reply #16 on: June 22, 2020, 10:48:37 PM »

I am so relieved to be wrong about toxicity of acetone!  I'll still vent, and keep away from flames, but otherwise, sounds like much gentler to us humans than I "knew.". ....Thanks!

David

A Safety Data Sheet for acetone.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Celluloid Crack Fusing Repair
« Reply #17 on: June 22, 2020, 11:12:14 PM »

How cool would it be to turn up at a session in a van that looks like a Connemara 111 though?
 I,m gonna need more celluloid!
                             John.
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Celluloid Crack Fusing Repair
« Reply #18 on: June 23, 2020, 02:51:49 AM »

Here is another little celluloid repair I'm working on. I removed a music stand that was mounted to my other Paolo. glued toothpicks into the screw holes per advice from Theo on another thread. Sanded them flush after a couple of days drying. Next step is to get a drill bit of the same size and hollow out the toothpick so I can get started filling it with celluloid paste or nail polish (haven't decided yet)
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Celluloid Crack Fusing Repair
« Reply #19 on: June 27, 2020, 07:28:34 PM »

 Put a mm or two of pure acetone in the foil tray, then put your piece of celluloid on the little raised platform and put the lid on and leave for an hour.
Be sure to check it every 10 min or so, ambient temp has a big effect on how fast it softens.

If the damaged area is small take a old nail polish jar and dissolve your piece of patch material in a mixture of acetone and a bit of lacquer thinner, it will take a couple of hrs to dissolve. Paint a layer on the crack, paint a layer every 12 hrs till it is a bit high. Let this dry for several days, if it is a corner use a jewelers file to smooth it ,flat areas can be done with a small piece of wood with fine 1000 grit sand paper glued to it, use a bit of water to keep the area wet or the paper will instantly clog.
you can chemically smooth it with a quick swipe of a brush with acetone on it, this will reveal bubbles in your finish if you got in a hurry with the painting of layers.
 if you have a piece of celluloid you can put a couple of drops of acetone on it and after a few seconds scrape off the softened material with a knife and use the blade to pack the paste into the damaged spot. you need to work fast and then give everything some time to harden before the next step.
 The celluloid will shrink as it dries so don't final sand or polish it for a week or grooves and dents will show up after a couple of days.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal