Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Getting the recording level right for youtubes  (Read 1572 times)

0 Members and 1 Guest are viewing this topic.

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Getting the recording level right for youtubes
« on: June 22, 2020, 01:35:02 PM »

My recent posts of Manon have led to helpful replies from Gena and Roger, but about the recording level rather than the tune. So maybe best to start another thread.

Roger writes

"I don’t know how you get your video onto YouTube, but I get the raw vid and edit it in VideoPad, then export to a manageable size/resolution (which also speeds up the YT upload).  However I found that exporting it to mp4 and one or two other formats including mov left me with a clipped sound track as per Gena's image. I think this is a problem with the converter in VideoPad, because a) the audio wasn’t clipped in the raw recording, though the level could have been set lower and b) vp playback didn’t clip it.  Clipping happened after conversion. A lot of head scratching later, I discover there can be tech issue with VP, but exporting to .avi (which is supported by YouTube) solved the issue, probably because it’s using a different converter. Of course this most likely had nothing to do with your  recording, but I just thought I’d mention it coz it caused me a long afternoon of puzzlement."

Gena displayed the waveform of my recording of Manon (2),showing problems from setting the level too high (But after a zillion takes of the tune, I wasn't about to mess with the tech).

Really I'm trying to find a quick and easy way of recording, like I used to have with a compact camera, with no editing beyond the yt trim. I want to focus on the music and not get into learning a lot of complications such as Roger is talking about.    I'm using the Windows Camera app on the laptop to do the recording, with a USB microphone without a level control.  I think I may have found  a possible way forward. I can access "Realtek Audio Manager" which allows me to set "Recording Volume" on the microphone tab. I hope that this is the same as setting Level, as I do on the H1.  I'll do some experiments and hopefully avoid excessive level.  If not, back to the H1 with its inbuilt level control.


« Last Edit: June 22, 2020, 01:36:36 PM by Jackhumphreys »
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Getting the recording level right for youtubes
« Reply #1 on: June 22, 2020, 03:37:40 PM »

My recent posts of Manon have led to helpful replies from Gena and Roger, but about the recording level rather than the tune.

Haha, sorry - I mean, your playing seemed good, but, I'm not familiar with how else the tune might sound, nor is it currently within my realm of familiarity. Going on about audio processing, however, is, so I picked up on that.

Given Roger's notes on the issue, this may be something that kinda falls in line with 'being at the mercy' of the video editor. If your original recording was good, but it got needlessly amplified by VideoPad and started clipping, then, the problem would be with VideoPad's export settings. If it is indeed something the software is getting wrong for you with this recording, there might not really be a way to convince it to not do that.

If, in this case, you do find the cause was that your playing was just a bit too rambunctious for the recording level, you may be able to find an alternative video recording program that will provide you visual feedback of your audio recording level, and give you a flashing red light or similar if the audio is too loud (as I assume the H1 would do, the h2n does). Said software may even allow you to to adjust the level. That would replace the Windows Camera app in your process, and allow you to still use VideoPad if you find it is working for you.

nb: your realtek audio manager may or may not allow you to adjust your recording volume for your USB mic. Because you are using a USB microphone, the audio from it does not present actually itself to your computers normal sound hardware (the thing you listen to sound with). Instead, your computer considers it an entirely separate sound device. The realtek software may only be able to control the level of the 'normal' microphone input that your computer had to start with, which has it's own microphone typically as part of the laptop, and which you can plug in to a 3.5mm jack.
« Last Edit: June 22, 2020, 03:44:05 PM by Gena Crisman »
Logged

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Getting the recording level right for youtubes
« Reply #2 on: June 22, 2020, 05:23:59 PM »

Thanks again Gena. After a few minutes with google, I've now found the proper windows sound settings and where to enable and where  to control microphone input level. I appreciate your detailed comments. Now it's over and out, and up to me to implement.
Later... Success: good quality sound, loud enough and not peaking too high.
I reckon that in my Manon recordings, the new diaphragm mike had not been enabled, and I was just recording off the laptop inbuilt mike. So I'm feeling a bit foolish, having spent so many hours with the zillion takes. It's all learning, just not very efficient learning.
« Last Edit: June 22, 2020, 05:43:22 PM by Jackhumphreys »
Logged

gmatkin

  • Gavin Atkin
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
    • Julieandhersqueeze.com
Re: Getting the recording level right for youtubes
« Reply #3 on: June 24, 2020, 05:02:17 PM »

I do something that works for me. I work in Audacity (I'm a cheapskate, I guess) and after doing the eq stuff then the reverb stuff, I then compress using a 3:1 ratio in the usual way, then amplify -1dB, and then use the limiter on the hard setting without adjusting the levels from the way they are supplied (so I can't remember what they are).

Doing that gives me a little headroom, and a more 'finished' sound that I like. I guess that's because we're all used to broadcast sound that has just a touch of hard limiting about it. It doesn't give me problems with YouTube. I have no idea whether this routine will work for everybody, but it's free and easy to try...

Gavin 

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Getting the recording level right for youtubes
« Reply #4 on: June 24, 2020, 06:34:00 PM »

...I work in Audacity (I'm a cheapskate, I guess) and after doing the eq stuff then the reverb stuff, I then compress using a 3:1 ratio in the usual way, then amplify -1dB, and then use the limiter on the hard setting without adjusting the levels from the way they are supplied (so I can't remember what they are).

Doing that gives me a little headroom, and a more 'finished' sound that I like. I guess that's because we're all used to broadcast sound that has just a touch of hard limiting about it. It doesn't give me problems with YouTube. I have no idea whether this routine will work for everybody, but it's free and easy to try...

Gavin

What you are actually doing, I suppose, is reducing the dynamic range in order to increase the perceived (average) loudness. I think your "more finished" sound seems better to you, because it comes over as louder without anyone touching the volume control.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Getting the recording level right for youtubes
« Reply #5 on: June 25, 2020, 05:40:50 PM »

Yes,  What Gavin's doing (compression and limiting) is definitely aimed at loudness.

I record at some level that avoids clipping (aiming for about 10dB below full scale on the peaks, it doesn't matter very much)
Processing:
Some panning of L and R mics because sometimes they are too separated and I'm aiming for a natural central stereo image.
Add a very small amount of reverb, because my studio is acoustically treated, so much drier than a typical house room. Just enough that I can hear the difference when cutting it in and out, not enough for it to be mushy.
No EQ if it's just a melodeon.
Around 3dB of limiting just to make sure the level of the whole recording isn't pushed down unreasonably by one rogue peak.
Finally, normalised so biggest peak is something like 0.5 dB below full scale, which is advisable when it's going to be encoded with AAC for video because that can make the peaks go higher.
Also, I use 48kHz sampling rate because that's standard for video, so is unlikely to get converted at any stage.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Getting the recording level right for youtubes
« Reply #6 on: June 27, 2020, 06:16:25 PM »

https://youtu.be/J_R7Ef7pkCg
Here's my latest try.  I've managed to find the Windows Sound settings which allow me to enable the diaphragm mike (rather than inadvertently recording through the laptop mike) and also to set the level for the mike. Here set to 60%.  I  even uploaded it to Audacity just to look at the waveform as Gena did.  So the sound quality is better, and sounds quite lifelike.
The problem remains of unduly LOUD PEAKS, such as the final note.  I'm guessing that this would be helped by moving the mic away from the treble end.  It was about a foot away in this recording. Is that right?   

I'm still with Winston in trying to find a quick and reliable way to record and post, without needing to edit other than with the youtube trimmer.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Getting the recording level right for youtubes
« Reply #7 on: June 27, 2020, 08:04:36 PM »

https://youtu.be/J_R7Ef7pkCg

The problem remains of unduly LOUD PEAKS, such as the final note.  I'm guessing that this would be helped by moving the mic away from the treble end.  It was about a foot away in this recording. Is that right?   


This is where some compression is useful. It will tame the peaks.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Getting the recording level right for youtubes
« Reply #8 on: June 27, 2020, 09:28:32 PM »

Bear in mind that in this context, 'compression' means dynamic range compression.

Anyway that seems better? A big punch that clips is better than there being one every other bar, by a large margin. Ideally you'd have none, but, if the choice is not producing videos or having a few, I think I know which way I'd steer.

The reality is that audio equipment is pretty bad at reproducing dynamic range that exists in real life. People pay a lot of money for sound systems for like, home theatre's or music listening rooms etc. They don't do it for youtube, and youtube audio is sufficiently low quality that it's not worthwhile to try.

It is possible to do dynamic range compression in real time, but I doubt favorable results will be achieved. Its typically used for streaming ones voice evenly when one looks away from the mic.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Getting the recording level right for youtubes
« Reply #9 on: June 29, 2020, 01:37:30 PM »

The reality is that audio equipment is pretty bad at reproducing dynamic range that exists in real life.

Used to be in the days of analogue tape, especially cassettes. Now CD quality (16 bits = 96dB) exceeds the dynamic range of human ears  and though perceptual coding (MP3, AAC in videos etc.) is not quite as good, it's dynamic range is comparable. This YouTube video linked from that page illustrates the point well.

Quote
It is possible to do dynamic range compression in real time, but I doubt favorable results will be achieved.
Without context, this is nonsense: in fact I can think of few examples of compression done other than in real time, except in Audacity where no processing other than mixing is done in real time.
We've had compression in the form of broadcast limiters for ever, automatic recording level control on tape recorders from the 1950s onwards, and in everything from cheap guitar pedals to studio equipment costing £thousands, mixers with a compressor in every channel and compression done digitally for at least 4 decades.

What I would say (and maybe you meant) is that over-zealous compression while recording is not a good idea because if you overdo it, you can't undo it later. In a studio setting, you usually record unprocessed and apply compression (and EQ etc.) during mixing when you have the opportunity to tweak it till it sounds right. Even so, most portable recording devices do have an "auto" setting for recording level, (which is a compressor by another name) and it's very useful for live settings where sound levels will be unpredictable.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Getting the recording level right for youtubes
« Reply #10 on: June 29, 2020, 05:16:39 PM »

That's fair, that post really was kinda half baked.

I had meant more compared to the experience of human hearing (as opposed to 'real life') in the same situations, there are still many unwanted/more apparent negative effects from rooms with bad noise floors, and then again with lower quality speakers & amplifiers that many people have access to - that kind of thing. Things that we humans (generally) don't notice with live acoustic instruments, anyway. My real goal was to say that I think eschewing dynamic range compression of any kind, especially if one is having issues with spikes like this, is probably a disservice. Plus, I feel like trying to actually make use of a wide dynamic range in a recording for eg youtube from a home recording could be either difficult or wholly ineffective on multiple levels. I had added that paragraph in mind of this comment from Greg:

What you are actually doing, I suppose, is reducing the dynamic range in order to increase the perceived (average) loudness. I think your "more finished" sound seems better to you, because it comes over as louder without anyone touching the volume control.

Which idk kinda seems to paint it as a negative tarnish having been applied? Idk, I think some kind of compression of this type might help Jack, in particular because of his strongly vocalised 'hands off' approach, but I'm not sure how he can approach it unless he takes a bit of a dive into audio processing. I personally choose not to use compression unless I feel I have dynamics/volume creep issue, preferring to manually attenuate any unintended-by-me spikes before normalising the whole track evenly upwards to what I feel is an appropriate level.

I guess the context that I'd offer for the latter point would be 'if you have a USB mic connected to your windows desktop computer recording into the windows videos app'. For example, the donation-ware (ie, free, but, they take donations) program Voicemeeter Banana is well regarded by streamers (to my knowledge) and does offer this technology in ways that can be configured, but probably looks super complicated compared to a 'loudness equalisation' checkbox that, to me, instils an unjustifiable amount of terror. Importantly, though, I'm not sure if it will cause a buffer delay issue for real time recording such as Jack is doing.

Just as you warn - and, as you correctly surmise, I had intended to state - it can easily cause you a lot of problems because you can't undo it, and you don't have a person listening to it in real time to adjust any settings either, so, it can be wrong in spectacular fashion.

So, my response of solutions & muddled notions mostly falls in line with my lack of further advice for Jack.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Getting the recording level right for youtubes
« Reply #11 on: June 29, 2020, 06:29:20 PM »

That's fair, that post really was kinda half baked.

...I had added that paragraph in mind of this comment from Greg:

What you are actually doing, I suppose, is reducing the dynamic range in order to increase the perceived (average) loudness. I think your "more finished" sound seems better to you, because it comes over as louder without anyone touching the volume control.

Which idk kinda seems to paint it as a negative tarnish having been applied?

Not intended as a negative comment at all. Just trying to clarify what is happening when you use compression.

When I first started playing around with audio, about twenty years ago, my "mentor" was insistent that a bit of compression made music sound better and that I used a hardware dynamic compressor, rather than a software one, so I went out and bought one. It took me some time to work out what was better about it and realise he was right (but software audio processing is in a different league these days, so you don't need to buy extra equipment).

What I find is that is helps make the music sound a bit more...as intended and controlled. There are limits to its effectiveness, though.

I always record raw and process post recording, so that I have a clean version to go back to, if I overdo it. I've done this ever since I overdid a reverb effect while recording and ruined it.

I use Reaper, which allows you to monitor the results of applied effects in real time and tweak until you like it. I don't know if this applies to Audacity. Dead easy to do.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal