Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Another Lockdown Modification â™§3BS  (Read 3494 times)

0 Members and 1 Guest are viewing this topic.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Another Lockdown Modification â™§3BS
« on: June 27, 2020, 11:11:05 PM »

Unless you own a hohner club 3bs this post probably wont interest you, but if you do....
 A year ago I added another bass button to this box with the promise to self that I would also add
a matching button - if I could - to the treble side. On opening the box I was pleasently surprised to find that the reed block for the half row is full sized with spaces. (See pics.)
 This means that all thats needed is to make holes in the vacant chamber -  and slide - and mark through to the fondo and drill to match, then wax in your new reeds and your done.
The new lever & pallet needed to be fabricated and mounted  first ,cos if this didnt work there was no point in going any further. I used an old lever & button from a club 2b, but they were the wrong size in both directions - the pallet end needed extending about 25mm, and the button end was too long. The extra length I "lost" with a mad swerve - see pic.
First of all though the keyboard had to come off - 2 screws OK - but it took me another 15 mins to find the wee brass screw buried in the dust in the middle & right at the back.
I the discovered I needed to remove the 3 bits of wood that support the faceplate to be able to remove the keyboard without bending the levers. The can be glued back in easily afterwards.
The only tricky bit with the lever is getting the button to sit in the middle of the new hole you have to drill in the top plate.  I decided not to glue the button on until last,leaving the hole elongated so some adjustment is possible. ( more pics).  Care is needed in drilling any of the holes to avoid damage. I clamped the celluloid top-plate to a piece of wood for drilling.
Drilling through the reed block with the slide in place seemed like a good shortcut until I discovered
 that due to the burr on the slide ,it was extremely difficult to get out.
I managed to tap it out with a hacksaw blade & hammer from the bottom end.
Luck for me the brass? slides and fondo etc. are all very sturdy, so no damage.
I hope this will encourage anyone who owns a club 3bs to have a go as it seems a shame to have the space on both the keyboard mech. and the reed blocks and not use it.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #1 on: June 27, 2020, 11:13:11 PM »

More pics
The top bubble should read :  G#2/C3 I think, anyway an octave lower.
« Last Edit: June 27, 2020, 11:30:24 PM by JNM SY »
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #2 on: June 27, 2020, 11:27:44 PM »

Picture,i hope, of bottom of button showing elongated hole.
When you decide which way it needs to go to be in the centre of the hole, you pack the opposite side with a piece of cocktail stick then glue it on the lever.
Anyway, it worked, if fact it plays better than before due to the cleaning of the slides etc.
        Good luck -  John
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #3 on: June 27, 2020, 11:32:33 PM »

See correction above.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #4 on: June 27, 2020, 11:45:50 PM »

This is when the wife comes in an says "never mind that sh*te, go and cut the grass!"
and you wish you hadn,t started it.
But it all worked out in the end. (Grass cut too)
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Another Lockdown Modification â™§3BS
« Reply #5 on: June 28, 2020, 12:23:48 AM »

Hello, this is very interesting. I have a 3Bs just like yours, keep it at work as a practice instrument, and it has rather grown on me. I am intrigued though, didn't know you could detach the whole front in that way. What needs undoing to do so?
Cheers, Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #6 on: June 28, 2020, 01:32:19 AM »

You need to remove the bellows pins, then the reed blocks for the half row. One of the screws for removing the keyboard "body" is partly hidden by the bottom single reedblock.
Remove the two 2 inch screws at each end of case. The keyboard body will loosen now but you wont be able to remove it untill the small brass screw under the levers is located and removed.
Be carefull,you dont want to chew up the head. So the keyboard is loose but still wont come out
 The 3 vertical pieces of wood are glued in place between the levers. You need to remove them.
It doesnt matter if they break at this stage.
Once out of the way the body of the keyboard easily comes away.
You will then see that the buttons,levers & pallets are rivetted to a horizontal steel bar with a screw at each end. Take out these screws to remove this complete assembley. Note that even with both screws removed it is still difficult to budge the keyboard assy. This is because the steel bar is also located firmly in a groove in the wood & needs to be levered towards you with a screwdriver.
 See pic. Hope this helps.  Its the kind of job you need to take lots of breaks from and do slowly
 and carefully. It helps to have seperate small containers for all the wee screws.
Come back if you need more info -  John
PS. The tiny brass screws ,5 or 6, along the top,need to come out also.
« Last Edit: June 28, 2020, 01:42:03 AM by JNM SY »
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Another Lockdown Modification â™§3BS
« Reply #7 on: June 28, 2020, 01:58:42 AM »

John, this is fantastic. Thanks for these clear instructions and pictures.  At some point, I intend to make it 12 bass by scrapping the stradella mech, and building new blocks and key mechanism. May be some time before I get round to it though!
I have really grown to like the 3BS, I normally play a  Mory or a Bouebe, but pick up the Hohner during quiet times at work, and really enjoy the feel and the sound.
Thanks again,
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #8 on: June 28, 2020, 02:20:27 AM »

Thats a good idea, I,m always looking for shortcuts and I wander if  the blocks & mech & fondo from an old trichord could be grafted in? That would save time! Good luck - John
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #9 on: June 28, 2020, 02:42:22 AM »

METHOD FOR MARKING HOLES IN REEDBLOCK ETC.
 Remove slide & place on Top of block so holes match.
Move slide along 1 posn. ensuring holes still match.
Draw inside slide at right hand hole giving accurate spacing for new hole.
Find centre of square.
Put slide back inside block matching existing holes.
 Using a pin vice and 1mm drill, drill through the wood untill you can leave a mark on the slide in the exact same place . TAKE OUT THE SLIDE.
Dont drill with the slide in place - its a bu**er to get out again! 
See pic PS. If you then put the block in place, you can mark through the new hole onto the fondo ensuring everything lines up perfectly.
« Last Edit: June 28, 2020, 02:45:11 AM by JNM SY »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another Lockdown Modification â™§3BS
« Reply #10 on: June 28, 2020, 08:02:01 AM »

This is really clever! The word bubbles are a lovely addition, and really help to make your instructions clearer, thanks for your expertise in creating them too.

I've often wondered why slide holes are usually rectangular, instead of just plain old (and easy!) round? Does it actually make an appreciable difference to the amount, or flow, of air to/from the reeds and therefore the sound as it's heard? (Especially in instruments where the other holes are just round, as is the case here.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Another Lockdown Modification â™§3BS
« Reply #11 on: June 28, 2020, 10:00:43 AM »

Thanks for posting this. I'm not alone!!!
Seriously those old club boxes have a lot of scope for adding bits and they were built to last.
Hohner's economies of scale in using full sized blocks for everything and only using some of the positions have really helped.
Can you let us know what you did to the bass end too and your reasoning behind it?
And are you thinking of building a full C# row?
It's an excellent, well thought out job though and like Winston I'm impressed by the use of the speech bubbles.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Another Lockdown Modification â™§3BS
« Reply #12 on: June 28, 2020, 12:05:39 PM »


I've often wondered why slide holes are usually rectangular, instead of just plain old (and easy!) round? Does it actually make an appreciable difference to the amount, or flow, of air to/from the reeds and therefore the sound as it's heard? (Especially in instruments where the other holes are just round, as is the case here.)

Slide holes are rectangular to give more space between holes thus ensuring there is no leakage when the slides are closed.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #13 on: June 28, 2020, 12:09:22 PM »



I've often wondered why slide holes are usually rectangular, instead of just plain old (and easy!) round? Does it actually make an appreciable difference to the amount, or flow, of air to/from the reeds and therefore the sound as it's heard? (Especially in instruments where the other holes are just round, as is the case here.)
Hi, I,m glad you liked (and made sence of  )this  post. If you look carefully at the row of Round holes you will see that its impossible to "hide" a round hole in a slide in the space between the block holes. The air would leak out one side or the other. The square holes compensate for being narrower by being square at the top & bottom. I think?
Anyway, dont spend hours making slides with round holes - you,ll be disappointed!  - John
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another Lockdown Modification â™§3BS
« Reply #14 on: June 28, 2020, 01:00:11 PM »

Righty-ho! So the extra passage created by having corners allows for a smaller hole linear-wise, which must logically mean that the small difference in the amount of actual air which passes through must be critical to the sound which the reed makes for any given pressure? Thank you.

As for making a slide; that isn't likely to happen. If I don't have something, or can obtain it cheaply, which I can then modify, it doesn't get done!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #15 on: June 28, 2020, 01:02:20 PM »

Thanks for posting this. I'm not alone!!!
Seriously those old club boxes have a lot of scope for adding bits and they were built to last.
Hohner's economies of scale in using full sized blocks for everything and only using some of the positions have really helped.
Can you let us know what you did to the bass end too and your reasoning behind it?
And are you thinking of building a full C# row?
It's an excellent, well thought out job though and like Winston I'm impressed by the use of the speech bubbles.
Hi Squeaky, My added bass button was really very basic compared to your stuff.
Sadly these fotos were on a MicroSD card (64gig) which has just died - and taken my itunes collection and videos with it. I,ll take some more fotos when I next open it (soon).
 Meanwhile, I,ll try and explain.. The bass reedblock has 4 sets of basses with a long blank part of the foot of the block at the right hand side. Because of the spacing on this block, a lot of space is wasted and any further development is impossible without new blocks,fondo,etc.
I just cut the end off an old bass reedblock, - removed the wedge shaped peice of wood, and stuck the old bit into the space created by moving the wedge. New reed chamber now created for another set of reeds. On this box I,ve done away with basses and now just have thirdless chords so all the fiddly work is on the bass mech.  Starting with adding a new horizontal rod in a spare position at the top. Into this rod you have to insert two "pegs". One coming from below the new button which turns the rod when the button is pressed, the other transmits this motion to the new pallet lever.
There ,s space for four new horizontal rods but not for the reeds using the current block.
My eventual plan is to find/make a 40-50 bass bass which doesnt spoil the look of this box which I rather like as is.  I dont plan on adding any more treble notes at the moment, the current note was added for playing in the key of F which Ive taking a liking to just now.(The C3 on the pull)
I also play some tunes in E on the outside two rows which become F when slid in a row.
As regards the bass I think your approach is the way to go, or for myself (because I already play them ) a cut and shut 50 bass - in matching colour/style.  I don,t want much eh?
              Good luck -    John
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Another Lockdown Modification â™§3BS
« Reply #16 on: June 28, 2020, 01:13:32 PM »

As for making a slide; that isn't likely to happen. If I don't have something, or can obtain it cheaply, which I can then modify, it doesn't get done!

It's no so difficult.   You can make a slide from 2mm aircraft ply.  Tools required: pencil, steel rule, stanley knife.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #17 on: June 28, 2020, 01:29:13 PM »

Right then, modified bass reedblock pic coming up - it was just an experiment, honest, but really quick - a chop saw was involved!   John
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #18 on: June 28, 2020, 01:58:22 PM »

Bass mech.pic.
This shows the new horizontal rod added.(No.9 from the bottom)
The coloured marker on the rods was for ease of quick re-assembly.
One could add another reed chamber on the other end of the reed block I suppose but that would require moving the air button out of the way. Cheers.  John
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Another Lockdown Modification â™§3BS
« Reply #19 on: September 16, 2020, 10:29:52 PM »

Update - I ended up making a full third row on my 2 voice club 2b, and was well chuffed with it so decided to do the same with the Club 3bs. (See pics) word of caution for anyone doing this modification - drill holes by hand or a very slow drill speed. The keyboard top plate is brittle and if the drill bit digs in it will crack or shatter it, so better to drill by hand to avoid disaster.
Good luck, John.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal