Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: 'Dedic' tuning on LMMH with fixed stops  (Read 5796 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
'Dedic' tuning on LMMH with fixed stops
« on: June 29, 2020, 05:42:19 AM »

I understand the premise of 'Dedic' or Viennese tuning and what it does/why it works/etc.  I have a one-row in LMMH with fixed stops, meaning that it's LMMH all the time.  It's currently tuned fairly dry (M=440 M+=441), but if I decide to increase the wetness, I could either go M=440 and M+=442, or M-=439 and M+=441.  The latter option should result in the entire box sounding in tune with 440, but I'm wondering if there would be any tonal differences between option 1 and option 2, given that the box is LMMH and not just the two middle reeds?  I imagine there would be a difference given that something different is going on between the two options... Perhaps it's not something the average person would pick up on, but I have a sensitive ear!  Haven't tried it yet...
Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #1 on: June 29, 2020, 08:17:14 AM »

I've never tried it with a LMMH box, but I did put a LMM two-row box into Dedic/Viennese tuning with a continuous 4 cents offset (+2, -2) across the range of the MM reeds, and it sounded just fine. The L reeds were tuned with zero offset. The box had a single stop to bring in the L voice, so the only possible combinations were MM and LMM.

I wouldn't try it on a box which had individual switchable reed banks, for the very reasons which you already appreciate!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #2 on: June 29, 2020, 08:18:02 AM »

One suggestion..you could tune a sample note (or two) to see whether the effect pleases you.

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #3 on: June 29, 2020, 09:28:14 AM »

At the risk of thread drift in reply number 3...

Dedic and Viennese tunings are not quite the same thing are they? Dedic tuning uses a constant offset in Hz to give a constant beat between reeds across the instrument while Viennese tuning increases the offset with pitch so the beat rate has doubled after every octave. Please correct me if this is wrong.

I have thought about getting an LMM box with only an L stop tuned like this. Must find someone to do it.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #4 on: June 29, 2020, 09:37:14 AM »

Dedic and Viennese tunings are not quite the same thing are they? Dedic tuning uses a constant offset in Hz to give a constant beat between reeds across the instrument while Viennese tuning increases the offset with pitch so the beat rate has doubled after every octave. Please correct me if this is wrong.
You may be right - I'm not sure but I think the definitions have become a bit blurred and the terms are used interchangeably. Ian Dedic may well be along dreckly to correct things but as far as I understand the meaning is this:
To have the two M reeds tuned equally above and below 'at pitch'; so M+ and M-. The amount of offset depends on what degree of tremolo is required.
I believe Ian Dedic's personal preference is to have a constant 4 cents offset across the range, which will result in a gradually increasing tremolo rate as pitch goes higher. But as I said, I may be wrong.
Ian...?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #5 on: June 29, 2020, 10:03:09 AM »

It’s useful to keep the distinction I think, because the sound is different.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #6 on: June 29, 2020, 12:01:16 PM »

It’s useful to keep the distinction I think, because the sound is different.
What is your understanding of the differences, Theo?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #7 on: June 29, 2020, 12:17:00 PM »

As described above, Ian D has the beat rate constant at 4Hz,  typical Viennese tuning has a beat rate that increases toward higher pitches.  You could say that the Dedic version is a subset of Viennese.   There are already plenty of imprecise descriptive terms to do with tuning, it's good to try and keep useful distinctions where we can.   The words "dry" and "swing" have been so misused that they are no longer useful as any more than a very general description. If we can lets try not to let Dedic and Viennese get blurred.   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #8 on: June 29, 2020, 12:40:02 PM »

I hadn’t realized there was an accepted distinction between the terms ‘dedic’ and ‘viennese’. Thanks for the clarification.
Logged
C#/D player

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #9 on: June 29, 2020, 01:29:18 PM »

As described above, Ian D has the beat rate constant at 4Hz,  typical Viennese tuning has a beat rate that increases toward higher pitches.  You could say that the Dedic version is a subset of Viennese.   There are already plenty of imprecise descriptive terms to do with tuning, it's good to try and keep useful distinctions where we can.   The words "dry" and "swing" have been so misused that they are no longer useful as any more than a very general description. If we can lets try not to let Dedic and Viennese get blurred.
Thanks, Theo.
Agree with you about not getting terminology get blurred!

Still wondering about Ian's preference across the range. Is it 4 cents offset (+2/-2) or 4 Hz tremolo?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #10 on: June 29, 2020, 02:07:01 PM »

4Hz last time a tuned a box for him.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #11 on: June 29, 2020, 04:07:31 PM »

Quote
I have a one-row in LMMH with fixed stops, meaning that it's LMMH all the time.  It's currently tuned fairly dry (M=440 M+=441), but if I decide to increase the wetness, I could either go M=440 and M+=442, or M-=439 and M+=441.  The latter option should result in the entire box sounding in tune with 440, but I'm wondering if there would be any tonal differences between option 1 and option 2, given that the box is LMMH and not just the two middle reeds?

With 440-442 there are 3 sets of reeds "on pitch" so any beatings (unisson or octave) will be due to the M+ reed bank.  With 439-441, both M reeds are "off" so they both have octave beatings with the L and H.  Seems to me this would sound busier/more complex.  More pleasant I don't know, it's probably a matter of taste...

My Acadian is tuned a bit wetter, 10 cents vs 8.  I'm not 100% sure but I think it is Marc Savoy's recipe for Quebecois tuning (it has '+5c' and '-5c' penciled on the blocks for the slides, anyway).
Logged

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #12 on: June 30, 2020, 06:57:14 PM »

My Walters was  viennese tune by Martyn White. Its an LLMM and sounds great. Due to the limited couplers I can only sample MM or LLMM so not sure quiet how the LL are tuned but its a big sound.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #13 on: July 01, 2020, 01:00:00 PM »

As described above, Ian D has the beat rate constant at 4Hz,  typical Viennese tuning has a beat rate that increases toward higher pitches.  You could say that the Dedic version is a subset of Viennese.   There are already plenty of imprecise descriptive terms to do with tuning, it's good to try and keep useful distinctions where we can.   The words "dry" and "swing" have been so misused that they are no longer useful as any more than a very general description. If we can lets try not to let Dedic and Viennese get blurred.
Thanks, Theo.
Agree with you about not getting terminology get blurred!

Still wondering about Ian's preference across the range. Is it 4 cents offset (+2/-2) or 4 Hz tremolo?

I've tuned Ian's Oakwood and his Dino Binci quite recently and they were tuned to +/- 5 cents at A440.

Martyn
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #14 on: July 01, 2020, 01:16:04 PM »

Just to report back that I tuned the LMMH box (with fixed stops) to Viennese tuning (approx 439-441) and it sounds great!
Logged
C#/D player

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #15 on: July 01, 2020, 01:36:56 PM »

My original idea was tuning with a constant bps difference across the range, I found around 4Hz beat rate was preferred but this is personal preference.

This was based on research into acoustics and how the ear perceives volume with vibrato (or reed detuning, which has very much the same effect), and how both singers and instrument players use vibrato to maximise apparent volume. The key point was that as the beat rate increases the ear can pick out the note from background noise more easily so it sounds louder, this apparent volume increase goes up rapidly at first but reaches a maximum around 7bps -- which was found to be what both opera singers and violin players used when struggling to be heard before the days of amplification. Above this rate the volume stops going up further but the sound rapidly becomes harsher and more "out-of-tune" sounding.

I then did tests with detuned synthesized reed notes on the computer which confirmed this, I found 7bps sounded pretty nasty (but very loud). Around 4bps seemed the best choice to me (YMMV); below this volume dropped off, above this the sound became less pleasant and only a little bit louder. I also found that this was the case for all pitches, which again isn't surprising given the way the ear works -- maybe a teeny bit slower on the low notes, maybe a teeny bit faster for high notes, but still in the 3-5bps range.

When I've had boxes retuned I've always asked for a constant 4bps; some tuners still lean towards some rate change up and down the keyboard and I'm OK with that so long as it's not too big, and tuning is still much closer to "constant-bps" than "constanct-cents". It was only after asking Nils Nielsen to retune my Oakwood like this for the first time -- which he agreed sounded lovely -- that he told me about Viennese tuning, I don't think anyone was currently calling it that until "Dedic" tuning started becoming more popular, often prompted by people who'd heard or played my Oakwood, and I told them about what Nils had told me.

The mistake a lot of people make is that they read about the pitch sensitivity of the ear being roughly constant in cents, which it is if you're looking at the absolute pitch of one note, but that's not what is happening here. You can easily detect a 1Hz pitch difference between two tones at 10kHz sounded together because you're not detecting pitch, you're detecting amplitude changes -- such a pitch change is completely undetectable with only one note sounding.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #16 on: July 01, 2020, 02:15:39 PM »

As described above, Ian D has the beat rate constant at 4Hz,  typical Viennese tuning has a beat rate that increases toward higher pitches.  You could say that the Dedic version is a subset of Viennese.   There are already plenty of imprecise descriptive terms to do with tuning, it's good to try and keep useful distinctions where we can.   The words "dry" and "swing" have been so misused that they are no longer useful as any more than a very general description. If we can lets try not to let Dedic and Viennese get blurred.
Thanks, Theo.
Agree with you about not getting terminology get blurred!

Still wondering about Ian's preference across the range. Is it 4 cents offset (+2/-2) or 4 Hz tremolo?

I've tuned Ian's Oakwood and his Dino Binci quite recently and they were tuned to +/- 5 cents at A440.

Martyn

1Hz is ~4 cents at A440 (100 cents = 1 semitone = 5.95% ==> 1 cent = 0.06%) which seems a bit small to me... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #17 on: July 01, 2020, 04:36:32 PM »

You can easily detect a 1Hz pitch difference between two tones at 10kHz sounded together because you're not detecting pitch, you're detecting amplitude changes -- such a pitch change is completely undetectable with only one note sounding.

You might be able to hear the beat between 9,999Hz and 10,000Hz. Some of us would be deliriously happy to hear anything at 10kHz.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #18 on: July 02, 2020, 07:28:49 AM »

My original idea was tuning with a constant bps difference across the range, I found around 4Hz beat rate was preferred but this is personal preference....
etc....


Many thanks for your very informative post, Ian.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 'Dedic' tuning on LMMH with fixed stops
« Reply #19 on: July 02, 2020, 08:00:32 AM »

'Dedic tuning' spreadsheet added.

I've adapted one of my tuning spreadsheets to calculate offsets for a constant 4 Hz tremolo. The offsets are shown in both Hz and cents across a wide pitch range (C3 - D7 chromatic). See attached PDF. Feel free to use, copy, adapt, etc.

For security reasons, the forum rules do not permit Excel .xlsx attachments but if anyone wants the live Excel version to see how the calculations work, send me a PM request with a valid e-mail address and I will forward the spreadsheet to you.

Steve
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal