Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: "Easy" Italian reed source  (Read 3264 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
"Easy" Italian reed source
« on: July 02, 2020, 01:29:48 PM »

I have just picked up a 3-voice instrument which is unexpectedly 'Clubbed' on the Treble end.  It is in C/F and I really don't want to work on the x 3 C/C reeds if I can help it.  I know it is perverse, but hey ho, I would like to keep them 'as is'. 

It is (almost certainly) Italian in origin, 1940's - 1950's, I am 90% ( if not 99 ) certain that it is in MMM voice, pending getting it ok the tuning table.  It is LMM ::).  Alloy reed plates, screwed onto leather gasket throughout.

I am looking for recommendations for an easy to deal (communicate ) with source for three 'decent quality' Italian reeds in 'C/D' to de-club it. 

It is not Clubbed on the Bass end, so no need for any tweaking there.

I have dealt with Hohner C-Shop for Hohner reeds and they stock/supply a "basic" Italian reed, with a note to indicate they can supply Tipo-A-Mano and Dural by special order, but they source them from Italy anyway, so I am happy to go direct to a supplier.

So, sensibly "decent" quality reed, able to communicate in English, responds to emails, doesn't take 'too long' to fulfil the order.

Suggestions appreciated.

« Last Edit: July 02, 2020, 08:13:53 PM by Nigel.H »
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: "Easy" Italian reed source
« Reply #1 on: July 02, 2020, 01:45:50 PM »


I am looking for recommendations for an easy to deal (communicate ) with source for three 'decent quality' Italian reeds in 'C/D' to de-club it. 

It is not Clubbed on the Bass end, so no need for any tweaking there.

I have dealt with Hohner C-Shop for Hohner reeds and they stock/supply a "basic" Italian reed, with a note to indicate they can supply Tipo-A-Mano and Dural by special order, but they source them from Italy anyway, so I am happy to go direct to a supplier.

So, sensibly "decent" quality reed, able to communicate in English, responds to emails, doesn't take 'too long' to fulfil the order.

Suggestions appreciated.

Sounds like a job for CGM (Charlie Marshall). His Cagnoni reeds get good reports. He is lightening quick with Hohner stuff. Uncannnily so. I think he readfs minds.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #2 on: July 02, 2020, 02:02:22 PM »

I didn't realise Charlie did them !.....I will get on the case directly, thanks for that. 
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #3 on: July 02, 2020, 07:34:46 PM »

Is it possible to tell - given that there is a range nowadays and probably was then - what these are likely to be in relation to grade ? ie. machine, handmade/finished etc. from the rivet face, tongue etc.
I don't want to waste money on putting high end reeds in if the rest of them are 'modest', but equally if it is deserving of them being 'better' quality and in keeping with what is already there, I don't mind spending a few more bob as it is only x3.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: "Easy" Italian reed source
« Reply #4 on: July 02, 2020, 08:05:02 PM »

Is it possible to tell - given that there is a range nowadays and probably was then - what these are likely to be in relation to grade ? ie. machine, handmade/finished etc. from the rivet face, tongue etc.

The flats on the rivets show that these have been at least partly made by hand, so probably they are tipo a mano (hand-made type) reeds rather than just machine-assembled (macchina grade reeds), which would have a round dome head on both ends. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #5 on: July 03, 2020, 07:52:22 AM »

Thanks for that Steve.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: "Easy" Italian reed source
« Reply #6 on: July 03, 2020, 10:39:50 AM »

As an aside, I once had a Hohner Club I in C/F which had been restored with Cagnoni macchina grade reeds on the treble end. It was a delightful box to play, and the sound and response of the Cagnoni reeds were virtually indistinguishable from vintage 1930s Hohner reeds on zinc plates. The only reason I sold the box on was to swap it for a 1930s Erika with a full half-row.

I would have no hesitation in recommending Cagnoni macchina reeds as a substitute for vintage Hohner reeds if the latter were too far gone to be servicable.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: "Easy" Italian reed source
« Reply #7 on: July 03, 2020, 12:20:38 PM »

My experience of Cagnoni macchina Or super dural reeds has not been so positive.  I find them often to be a bit soft, both in response and tone.  This may be related to the varied playability in Saltarelles which usually use Cagnoni reeds. Cagnoni tipo a mano are well worth the small additional cost, though I don’t think CGM stock them.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: "Easy" Italian reed source
« Reply #8 on: July 03, 2020, 12:42:57 PM »

though I don’t think CGM stock them.

It might be worth asking him though - they're not on the website , but I have a set here which I brought from him some time back.

Graham
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: "Easy" Italian reed source
« Reply #9 on: July 03, 2020, 01:09:42 PM »

I ordered a set of TAM reeds from CAGNONI in May and they were easy to deal with. It was done through their sales manager. Ignacio Sorci
His email address is I.sorci@cagnoni.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: "Easy" Italian reed source
« Reply #10 on: July 03, 2020, 01:16:23 PM »

I’ve dealt with Ignazio too and found him very helpful,  and a fluent English speaker. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #11 on: July 03, 2020, 03:00:42 PM »

Thanks for all the advice.....Charlie has not got the required reeds in stock and has given some advice.  It involves files and I really want to avoid that if I can.  I had emailed Ignazio re TAM/AM reeds.  The initial response, in my contact re a "small" order, ie. small number of reeds, is that he can not help.  There may be a mis-translation here around needing 'small reeds', which I am seeking to clarify.  It may be they only supply full sets rather than individual reed's....I don't know, others may.

I also have a call out to Harmonikas.Cz.....no reply yet, I have a friend who is Czech and I may ask her to ring if I don't hear back.

I am surprised they are not available as a stock item, but there it is.
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: "Easy" Italian reed source
« Reply #12 on: July 03, 2020, 03:25:31 PM »

You won’t go far wrong with Harmonikas. They respond to messages very quickly, have huge stocks I am told, and will supply small quantities.
As to their quality, I have yet to receive my order, but have heard mostly good things about them.
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: "Easy" Italian reed source
« Reply #13 on: July 03, 2020, 07:52:37 PM »

With Harmonikas...be very specific about what you want and keep a record of that. They can be a bit sloppy in what they deliver. They will put it right but you need to show that you were crystal clear in what you asked for. And check every reed when you get them, to make sure the pitch is what you expect.
CAGNONI probably only supply complete sets of reeds. Carini will supply single reeds (that’s Carinidena). As mentioned elsewhere, they are very helpful (Luca is the guy..he converses in English).

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: "Easy" Italian reed source
« Reply #14 on: July 18, 2020, 08:36:08 AM »

With Harmonikas...be very specific about what you want and keep a record of that. They can be a bit sloppy in what they deliver. They will put it right but you need to show that you were crystal clear in what you asked for. And check every reed when you get them, to make sure the pitch is what you expect.
CAGNONI probably only supply complete sets of reeds. Carini will supply single reeds (that’s Carinidena). As mentioned elsewhere, they are very helpful (Luca is the guy..he converses in English).

Wot Roger sed!! (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #15 on: July 18, 2020, 09:25:18 AM »

Thanks for "all" the advice.....it was all valid.....nothing ended up being "easy" !  I don't quite understand why it is not possible to buy a reed plate ( or two ) from 'stock' via the Italian makers, but hey ho. I have an appropriate Italian 'match' lined up, sourced via the good-will and help of a Uk source, who was proposed by V.A.. so it was worth my asking.

I have a 'lead in' time and in the interim I fitted a trio of appropriate C/D reeds from a G/C block I had spare.  The leather gasket meant there was no waxing involved, so a 2 minute job.

I do not know how you go on if you break a reed in vigorous playing ?


Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: "Easy" Italian reed source
« Reply #16 on: July 18, 2020, 11:50:58 AM »

...CAGNONI probably only supply complete sets of reeds....

I've bought individual Cagnoni reed plates from Charlie Marshall before now. Best to contact him to see what his current stock is.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Plates.html
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #17 on: July 18, 2020, 03:24:18 PM »

Charlie didn't have the right reeds, notes/TAM and wasn't looking to re-order imminently, sadly.
Logged

Seth Hamon

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: "Easy" Italian reed source
« Reply #18 on: July 19, 2020, 08:15:12 AM »

I ordered 5 sets from Voci Armonichie last month and they were done in just under 3 weeks and were shipped 3 day global express.   
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: "Easy" Italian reed source
« Reply #19 on: July 19, 2020, 10:15:05 AM »

In fairness to V.A, Cagnoni etc, it wasn't supplying ( sets ) of reeds, that was their sticking point, it was supplying just the '3' plates ( for a 3-voice ) I needed.  A solution would have been to buy a typical "set" for A.N.Other box to upgrade it, as some do, with an extra order of the 3 plates I needed but that felt extravagant, or would have done if the wife had found out.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal