Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Angled reedblocks  (Read 2336 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Angled reedblocks
« on: July 14, 2020, 12:32:54 PM »

Most reedblocks are angled, so the reedplate never actually sits quite at 90 degrees to the fondo. Is there a reason for this? I’ve also noticed that some builders intentionally put a fairly pronounced angle to their reedblocks, so I’m inclined to believe it has some kind of impact on the sound/tone, volume and/or response of the reeds.

I’ve heard it said that reeds laid flat have a marginally quicker response that those that are upright, yet I’ve never been able to perceive a difference in sound, volume or response when comparing the flat to upright blocks in the same instrument (such as in a one-row with stops). I also recall Sylvain Vezina, maker of Melodie accordions, explaining to me that making his reedblocks angled at 45 degrees was more work for him but worth the effort as it resulted in a better sound (unless I misunderstood what he saying).

Logged
C#/D player

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Angled reedblocks
« Reply #1 on: July 14, 2020, 01:23:04 PM »

I'm currently making a two row - and the angle of the blocks is a function partly of the distance between the reed blocks. They are close at the base, but then need some taper upwards and /or angling to ensure sufficient clearance between the tips of the reeds on the inside faces of each block.

If each row of reeds was 90 deg  then to get the clearnace between the the biggest reeds on the inside of each block would require the bases of the blocks to be further apart - which would mean longer and heavier pallets on a 4 stop one row, and possibly create issues with equalising button travel against pallet lift on each row of a 2, or more row.
 
Additionally there is a need to at one edge to ensure sufficient clearance between the biggest reed (and adjacent valve) on the outer side of the block and the inside edge of the bellows frame or
anything else it might want to touch.

I suspect the difference in sound / response is more to do with whether the blocks are glued in rather than removeable - in which case if there is room in the instrument to angle them away from each other it
would make the reeds rather more accessible.

If register slides need to be in a particular position in the fondo for any other reason then that will possibly have a bearing on angle too, especially if it is low pitch, hence longer with tighter clearance, reeds being switched.

I think the mechanics of simply fitting all the reeds in such that none can touch anything they shouldn't while remaining reasonably accessible for tuning etc is probably the biggest factor.

Thats my amateur take, anyway.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Angled reedblocks
« Reply #2 on: July 14, 2020, 01:59:13 PM »

I also recall Sylvain Vezina, maker of Melodie accordions, explaining to me that making his reedblocks angled at 45 degrees was more work for him but worth the effort as it resulted in a better sound (unless I misunderstood what he saying).

I recall reading something about the "shape of the air column" having a more pronounced effect on tone than the type of woods used, and possibly even a greater effect than reed quality.  I can't imagine exactly how it all plays out, but I'm guessing that's a factor here.
« Last Edit: July 14, 2020, 02:00:49 PM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Angled reedblocks
« Reply #3 on: July 14, 2020, 02:09:39 PM »

I'm currently making a two row - and the angle of the blocks is a function partly of the distance between the reed blocks. They are close at the base, but then need some taper upwards and /or angling to ensure sufficient clearance between the tips of the reeds on the inside faces of each block.



I think the mechanics of simply fitting all the reeds in such that none can touch anything they shouldn't while remaining reasonably accessible for tuning etc is probably the biggest factor.

Thats my amateur take, anyway.
Reeds need a surprising amount of clearance while vibrating so are angled to avoid fouling the reeds on the next reedblock ( which may also be vibrating at the same time).
                 John.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Angled reedblocks
« Reply #4 on: July 14, 2020, 02:26:34 PM »

Angled keyboard doesn't affect the sound.
The it is there to decrease the angle of the wrist and so improve comfort while playing.

I’m asking about angled reedblocks, not the keyboard. Have you noticed any differences between different block configurations when building your instruments, Rees?
Logged
C#/D player

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Angled reedblocks
« Reply #5 on: July 14, 2020, 03:01:53 PM »

Most of the responses so far seem to agree with what Pariselle told me, which is to give proper clearance for adjacent reeds.

I’ve had two Sag’né boxes, one with your typical melodeon reed setup of two sets upright in the middle, and two laid flat on the sides, and the other with the side sets of reeds upright but slightly angled (11.5 degrees maybe?). Both boxes made from the same type of wood and most materials. The second box with the side sets of reeds upright on an angle is a powerhouse. The initial box with the two side sets laid flat was very polite and easily drowned out in a session. 
Logged
Too many accordions, help!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Angled reedblocks
« Reply #6 on: July 14, 2020, 03:17:40 PM »

But there are many other variables to eliminate before coming to a conclusion. Reed make and quality, pallet lift, size and shape of vent holes, reed mounting method and probably more!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Angled reedblocks
« Reply #7 on: July 14, 2020, 03:56:03 PM »

Angled keyboard doesn't affect the sound.
The it is there to decrease the angle of the wrist and so improve comfort while playing.

I’m asking about angled reedblocks, not the keyboard. Have you noticed any differences between different block configurations when building your instruments, Rees?

Sorry, I misread your post. Duh!

My Clipper and Corvette models have flat - 2 upright - flat (Cajun style) so there's never been a need to angle the blocks.
The Windjammer have four upright (Hohner style) so the reedblocks are angled to avoid interference from adjacent reeds and bellows
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Angled reedblocks
« Reply #8 on: July 14, 2020, 05:09:54 PM »

Quote
I’ve heard it said that reeds laid flat have a marginally quicker response that those that are upright, yet I’ve never been able to perceive a difference in sound, volume or response when comparing the flat to upright blocks in the same instrument (such as in a one-row with stops). I also recall Sylvain Vezina, maker of Melodie accordions, explaining to me that making his reedblocks angled at 45 degrees was more work for him but worth the effort as it resulted in a better sound (unless I misunderstood what he saying).

One may easily argue that the flat block, being glued to the fondo, is less likely to yield to the vibration of the reed (the kind of yielding that sometimes requires bracing between upright blocks).  Whether this translates in quicker response, I don't know.

I think we discussed the Melodie angled block layout in a thread here a while back.  IIRC, I pointed out it facilitated fitting the reeds within the standard Cajun bellows width and, more to the point, Steve_Freereeder said it would facilitate tuning: a flat-mounted reed would be awkward to work on in such a deep treble frame.  Of course Mr. Vézina is right about the good sound - this is a successful design.  (note the bracing)
Logged

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Angled reedblocks
« Reply #9 on: July 14, 2020, 05:42:32 PM »

Marcel Desgagné’s take on angled blocks:
Logged
Too many accordions, help!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Angled reedblocks
« Reply #10 on: July 14, 2020, 06:11:32 PM »

Interesting this, thanks Mr. RBak!  I note:

1) Comparatively shallow frame, so flat block would have been a 'workable' option.
2) hardwood inertia block head (no bracing) and in-the-fondo slides.  Both remind me of Messervier.
3) 3 flipped top reedplates on H bank, rather than more usual 2...   

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Angled reedblocks
« Reply #11 on: July 14, 2020, 09:07:17 PM »

Interesting this, thanks Mr. RBak!  I note:

1) Comparatively shallow frame, so flat block would have been a 'workable' option.
2) hardwood inertia block head (no bracing) and in-the-fondo slides.  Both remind me of Messervier.
3) 3 flipped top reedplates on H bank, rather than more usual 2...

"In-the-fondo" slides are standard on all Cajun style. hand-built melodeons.
They're not actually in the fondo, but sandwiched between the fondo and the reed-pan.
« Last Edit: July 14, 2020, 09:15:09 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Angled reedblocks
« Reply #12 on: July 15, 2020, 02:03:49 AM »

Marcel Desgagné’s take on angled blocks:
interesting the use of a buttress block on angled blocks ,maybe replacing the metal brace normally used?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Angled reedblocks
« Reply #13 on: July 19, 2020, 07:28:25 PM »

And then you get things like this https://www.instagram.com/p/Btml_aEhMoq/
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Angled reedblocks
« Reply #14 on: July 19, 2020, 07:51:23 PM »

Some similarities with the reeds in a Hohner Preciosa.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Angled reedblocks
« Reply #15 on: July 19, 2020, 11:02:47 PM »

I recently worked on a PA with a similar setup. Interesting!
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Angled reedblocks
« Reply #16 on: July 20, 2020, 02:16:53 AM »

And then you get things like this https://www.instagram.com/p/Btml_aEhMoq/
Interesting, does the middle reed block sit at the same plane as the rest of the reeds or does it sit slightly above when in place? ( it looks like the middle reed block might cantilever over the others).
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Angled reedblocks
« Reply #17 on: July 20, 2020, 08:51:42 AM »

There used to be a Castagnari Matty (three row Lilly) with the same type of arrangement. It didn't work very well.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Angled reedblocks
« Reply #18 on: July 20, 2020, 01:28:57 PM »

And then you get things like this https://www.instagram.com/p/Btml_aEhMoq/
Interesting, does the middle reed block sit at the same plane as the rest of the reeds or does it sit slightly above when in place? ( it looks like the middle reed block might cantilever over the others).

It cantilevers over the others.
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Angled reedblocks
« Reply #19 on: July 20, 2020, 01:51:36 PM »

I thought angled blocks was mostly to do with cramming them in and avoiding contact with adjacent reeds and the bellows, and also to allow enough room to get at them without removing the block. And isn't it just quicker and cheaper to flat mount reeds if you have the room...? Though I also thought that flat mounted reeds were in closer communion with the casing and therefore give a better sound?
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal