Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Sticking buttons/keys on celluloid keyboard  (Read 2237 times)

0 Members and 1 Guest are viewing this topic.

Nee

  • Member
  • *
  • Offline Offline
  • Posts: 5
Sticking buttons/keys on celluloid keyboard
« on: August 07, 2020, 12:15:08 PM »

Hello everyone,

I've recently become the custodian of a lovely little Hohner Liliput which is covered in celluloid.

I'm having a slight problem with some of the treble buttons which stick/bond/creak upon the respective inner hole surfaces of the keyboard (sometimes making it hard to push the button in).
This, I think, is mostly due to the celluloid covering material not allowing the button material to slide freely over it.
I had initially thought to use some sort of lubricant BUT(!), after some reading on this forum, realise this might not be the best plan..

I wonder if anyone has experienced a similar problem? If there is an accordion safe lubricant which anyone knows of I would also be glad to hear.

As an aside - I still am none the wiser to the reason why oil or grease would be unsuitable. It would be great if anyone could tell me.

Many thanks,

Adam (:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sticking buttons/keys on celluloid keyboard
« Reply #1 on: August 07, 2020, 12:29:09 PM »

There are a couple of things you can check.
1 - buttons are straight and at right angles to the surface of the keyboard, easy to check by looking along the rows and by looking from the edge of the keyboard.

2 - the holes are free of contamination from a buildup of dirt/dust/sweat/finger grease.  This is harder to check because you have to take the top off the keyboard to put clean up.

2- any roughness in the holes from wood fibres or displaced celluloid.  Again you need to take the keyboard top off to check and rectify this.

If you still can’t get things working smoothly then there are some dry lubricants that can help.  Powdered graphite can help but I wouldn’t use it for this application because it will blacken your fingers while playing.
Powdered talc can work too and won’t make your fingers dirty.
Best of the three is powdered PTFE. 

Don’t use any oily or greasy material because it will soak into the wood making it sticky and more dirt will build up eventually making the problem worse.

Try getting the buttons straight and the holes clean and smooth first.  Replacing the top off the keyboard is a little tricky, but I’ve done it several times and with care it just takes a few minutes.


 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nee

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Sticking buttons/keys on celluloid keyboard
« Reply #2 on: August 07, 2020, 12:48:15 PM »

Thank you Theo (:)
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Sticking buttons/keys on celluloid keyboard
« Reply #3 on: August 07, 2020, 02:02:33 PM »

I'm not exactly an expert on Hohner Liliputs, since these are not often seen in my country. But I suspect that the problem is caused by the natural shrinking of the celluloid which has occurred over the years. If  this should be the case, lubricating the openings probably won't be very helpful and you may have to modify the affected holes in the keyboard cover with f. ex. an appropriate round file.
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Sticking buttons/keys on celluloid keyboard
« Reply #4 on: August 07, 2020, 03:53:28 PM »

Don't know how much work you would be prepared to put into this, but this is my Liliput. I reamed the holes slightly, bushed them with 0.9 bushing cloth, and fitted a set of shiny metal buttons. Matching ones on the bass end too. A lot of tweaking was needed to get them running square to the holes, (you need to own/make adjusting tools for this), but now they play like velvet!
Purists may not like them though, but as I also fitted a thirds register to the bass, it is not original any more anyway.
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Nee

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Sticking buttons/keys on celluloid keyboard
« Reply #5 on: August 07, 2020, 08:47:06 PM »

Thank you all for the advice, it's much appreciated!
Logged

Nee

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Sticking buttons/keys on celluloid keyboard
« Reply #6 on: August 07, 2020, 08:54:27 PM »

Don't know how much work you would be prepared to put into this, but this is my Liliput. I reamed the holes slightly, bushed them with 0.9 bushing cloth, and fitted a set of shiny metal buttons. Matching ones on the bass end too. A lot of tweaking was needed to get them running square to the holes, (you need to own/make adjusting tools for this), but now they play like velvet!
Purists may not like them though, but as I also fitted a thirds register to the bass, it is not original any more anyway.
Dave

Thanks Dave, that looks like great fun to play, perhaps one day! Do the adjustment tools resemble a type of pliers?
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Sticking buttons/keys on celluloid keyboard
« Reply #7 on: August 07, 2020, 09:46:57 PM »

Well, I just used two steel 6mm rods with slots cut in the end to bend the wire rods. one to hold, one to bend. I also tweaked the loops on the ends of the rods a bit, some were quite sloppy. It’s amazing they work really, quite a crude system. But a lovely little instrument with a surprisingly nice sound. The only problem I find with it is running out of air very quickly. I’m sure you will enjoy it lots,
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Nee

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Sticking buttons/keys on celluloid keyboard
« Reply #8 on: August 09, 2020, 09:42:36 AM »

Thanks Dave (:)
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Sticking buttons/keys on celluloid keyboard
« Reply #9 on: August 09, 2020, 10:42:46 AM »

One more thing to check. If you take the keyboard cover off you may find its actually a sandwich. There is a thin layer of purple celluloid on top the main wood and under side also a thin layer off celluloid black or purple. It may be well shrinkage in this thats the real cause of the friction and not seen from outside. If this is old it can safely be gently peeled off in one piece also usefull as a template if the wood needs replacing.Sticky buttons are relatively rare on liliputs and I think this is sometimes the issue
Logged
Mark Taylor
Folkloristmark
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal