Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Cracked Wooden Keyboard - Repair or Replace  (Read 3249 times)

0 Members and 1 Guest are viewing this topic.

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Cracked Wooden Keyboard - Repair or Replace
« on: August 10, 2020, 06:54:48 PM »

When a keyboard has hole-to-hole cracks, what techniques are there to strengthen the crack, and to cosmetically hide it?  I guess the question also beckons, at what point would you just get a replacement keyboard?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #1 on: August 10, 2020, 07:10:19 PM »

Depends on the keyboard.  I assume its wood since that is the most likely to crack.  You would get more detailed advice if we could see a picture.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #2 on: August 10, 2020, 09:07:30 PM »

I will properly add this as a new topic at some point but thought I would put a teaser here:

I have developed an alternative to repairs or full replacement of broken Hohner keyboard tops that maintains the original wood. It is a flat machined panel with 21 slots (not holes but slots like the original) and 4 countersunk screw holes. I made a milling fixture to hold either 1/8" thick or 1/16" thick aluminum extrusions by the edges. A large CNC machine was used for accurate repeatable machining. A special round-over bit was purchased to put a small radius on the full perimeter of each slot and also on the machined ends of the extrusion. The extruding process itself provides a small radius on the long edges. This radius provides a nice comfortable edge so the fingers aren't going across a sharp corner.

Scott



« Last Edit: August 10, 2020, 09:18:29 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #3 on: August 10, 2020, 09:10:24 PM »

The keyboard can be prepared by simply routing a rectangular pocket to the proper depth. The 1/8" thick ends up supported by the two ends but is thick and rigid enough to work fine. The 1/16th pocket still has supporting wood on all four edges although it is thin along the long edges. It seems possible that the 1/16" could be mounted right on top of the keyboard without any routing but the levers would need to be adjusted to correct the button heights. I have not tried this yet but installation would simply be the 4 screw holes into the wood. I prefer the routed sunken look as it is quite elegant.

Scott

BellingersButtonBoxes.com
« Last Edit: August 10, 2020, 09:30:40 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #4 on: August 10, 2020, 09:15:43 PM »

Another benefit to this method is now access is easy for adding felt under the levers for positive button travel limiting. Here are some pictures of the machining fixture and special roundover bit.

Scott
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #5 on: August 10, 2020, 09:17:27 PM »

The CNC auto tool change machining center.

Scott
Logged
too many boxes...please buy one, or two, or

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #6 on: August 10, 2020, 09:25:04 PM »

Exciting!

Is the button-hitting-the-panel noise different with these?
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #7 on: August 10, 2020, 09:26:20 PM »

Typical and severe keyboard issues.

Scott
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #8 on: August 10, 2020, 09:28:06 PM »

Exciting!

Is the button-hitting-the-panel noise different with these?

It is quiet if you add thick felt under the button levers.

Scott
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #9 on: August 10, 2020, 09:32:03 PM »

Here's what it looks like on a black painted keyboard.

Scott
Logged
too many boxes...please buy one, or two, or

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #10 on: August 10, 2020, 09:47:41 PM »

That is a sweet and elegant fix.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #11 on: August 10, 2020, 10:01:23 PM »

Hohner had a metal keytop for a short while pre WW2. It was punched from very thin sheet metal but the process created a nice radius on the finger edge. This also allows for easy button travel limiting. The last picture shows Hohners notched cardboard stop under the levers.

Scott
Logged
too many boxes...please buy one, or two, or

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #12 on: August 10, 2020, 10:02:18 PM »

Very nice solution to a common problem, and I like the visual similarity to the old Hohner metal top plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #13 on: August 10, 2020, 10:02:43 PM »

Old Hohner in CF with metal keyboard top.

Scott
Logged
too many boxes...please buy one, or two, or

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #14 on: August 10, 2020, 11:33:41 PM »

Similar method I used repairing a one row, I used a piece of hard wood.
http://forum.melodeon.net/index.php?action=dlattach;topic=16508.0;attach=16052;image
Very easy to repeat this process with the proper jig.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #15 on: August 10, 2020, 11:48:34 PM »


I have developed an alternative to repairs or full replacement of broken Hohner keyboard tops that maintains the original wood. It is a flat machined panel with 21 slots
Scott
nice one  (:) I kept hoping some to to come up with something like this.
would it be possible to make a whole face cover as one unit? -as in just stick it on top full size facing- for people like me; with no tools or woodworking skill  :(  it will make life much easier.     
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #16 on: August 10, 2020, 11:58:47 PM »

That is a great, pragmatic repair option and, dare I say it, more elegant than the original Hohner version.  I guess if one had the patience (and dexterity) support posts could be added between the levers as was common on early models with a removable top - rather like the sound post in a violin.

If one were working in wood for a similar effect, once one was perfected accurate copies could simply be routed using it as a template for a bearing guide.  Did you also make a template for routing the top out?  Personally I'd be tempted by a stainless version - much better to clean and re-polish over the years than aluminum...

Bravo

Rob.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #17 on: August 11, 2020, 01:45:34 AM »

That is a great, pragmatic repair option and, dare I say it, more elegant than the original Hohner version.  I guess if one had the patience (and dexterity) support posts could be added between the levers as was common on early models with a removable top - rather like the sound post in a violin.

Neither need the support posts. The 1/8" is plenty stiff enough with just the end supports. The 1/16" is supported on all 4 sides so again doesn't need extra support.

If one were working in wood for a similar effect, once one was perfected accurate copies could simply be routed using it as a template for a bearing guide.  Did you also make a template for routing the top out?  Personally I'd be tempted by a stainless version - much better to clean and re-polish over the years than aluminum...

Bravo

Rob.

Thanks Rob. I don't use a router template. I have a 2500lb milling machine with X Y tables and a digital readout. I have made a special fixture that clamps the keyboard upwards and holds it by the top edges referencing the back, sawn edge. That way the depth is always correct and holes are in the right position. There is nothing easier than making a rectangular pocket on a mill. Although I considered stainless steel the machining becomes much more difficult and costly. It is also much heavier. I personally like the look of brushed aluminum. Doug Briggs keyboard top is beautiful, elegant and aluminum. BTW for anyone wishing to try routing I recommend purchasing a 'down cut' end mill. The spiral flutes are opposite the standard cutter. Most cutters are designed to lift the chips out of the cut but on wood usually cause chipping and breakouts. The down spiral cutters eliminate that almost entirely.

Scott
« Last Edit: August 11, 2020, 01:56:39 AM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #18 on: August 11, 2020, 01:54:13 AM »

Similar method I used repairing a one row, I used a piece of hard wood.
http://forum.melodeon.net/index.php?action=dlattach;topic=16508.0;attach=16052;image
Very easy to repeat this process with the proper jig.

I like your wooden one Michael. I assume you used plywood of some sort? The green hue adds some interest too!

Scott
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Cracked Wooden Keyboard - Repair or Replace
« Reply #19 on: August 11, 2020, 02:21:18 AM »

Back to the original poster's question, it depends on the extent of the damage. If it is only cracked best to carefully glue it back together pic 1. I have a gluing fixture with a rectangular heavy aluminum bar and matching clear plexiglas outer clamp pic 4. The aluminum has tapped holes pic 3. I use a thin steel shim to get the glue into the crack pic 2.

Scott
Logged
too many boxes...please buy one, or two, or
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal