Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fixing a crack/split between the fondo and the frame  (Read 1608 times)

0 Members and 1 Guest are viewing this topic.

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Fixing a crack/split between the fondo and the frame
« on: August 16, 2020, 09:18:47 PM »

(I hope I got the right terms in the title, I'll edit it if not)
Dear Melnet,

I've managed to find a nice box (Cornelia I) in a less nice shape. Mostly wood issues, reeds and bellows are fine.
My currently main issue is a crack in the treble side:



What can I do to fix the issue and have a box where the air only leaves through the appropriate holes?

Thanks!
Eshed
« Last Edit: August 16, 2020, 09:22:07 PM by Eshed »
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fixing a crack/split between the fondo and the frame
« Reply #1 on: August 16, 2020, 09:34:34 PM »

I may be being dense but I can't see the crack

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #2 on: August 16, 2020, 09:46:35 PM »

Not dense, it's hard to get depth in a picture with flash.
Attached is a picture with the crack coloured red and a picture where the crack is easier to see.
« Last Edit: August 16, 2020, 09:54:31 PM by Eshed »
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Fixing a crack/split between the fondo and the frame
« Reply #3 on: August 16, 2020, 10:16:09 PM »

The flash makes it look like something is down there.  Has it been filled already, but with something that is below the surface of the fondo?  Is air definitely coming through?

I've filled similar cracks with PVA+sawdust wood filler, and then a little CA on top once dry, to seep in and seal any pores.  There are probably better ways.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #4 on: August 16, 2020, 10:22:27 PM »

The flash makes it look like something is down there.  Has it been filled already, but with something that is below the surface of the fondo?  Is air definitely coming through?
Mostly dirt and remains of glue. Air is definitely coming through.

Also, CA?
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fixing a crack/split between the fondo and the frame
« Reply #5 on: August 16, 2020, 10:44:32 PM »

So it’s a failed joint.  Run a bead of glue into the angle, if possible on both sides of the fondo.  Ideally use the same kind of glue as originally was used. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Fixing a crack/split between the fondo and the frame
« Reply #6 on: August 16, 2020, 11:07:07 PM »

Also, CA?

Cyano-acrylate glue; 'superglue'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #7 on: August 16, 2020, 11:12:05 PM »

Ideally use the same kind of glue as originally was used.
It would be hard for me to acquire this information. That's a 30s Hohner, though, so I suppose they had some favourite for this kind of tasks?

Cyano-acrylate glue; 'superglue'.
Thank you, Steve!
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Fixing a crack/split between the fondo and the frame
« Reply #8 on: August 16, 2020, 11:58:24 PM »

I have had this before and fixed it sucessfully with PVA glue + clamp in place.Leave overnight.
 As your case looks slightly bowed compared to the edge of the fondo, I think you would need clamps also to pull it together tightly. Good luck, John
Logged

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #9 on: August 17, 2020, 05:17:24 AM »

Thanks for the advice,
Wish me luck  (:)
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fixing a crack/split between the fondo and the frame
« Reply #10 on: August 17, 2020, 08:19:05 AM »

I would use a good wood glue rather than superglue  Unless the crack was no more than a hairline.  Superglue is very good at penetrating fine cracks but in wider cracks it may not completely fill the gap, and it can be brittle. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Fixing a crack/split between the fondo and the frame
« Reply #11 on: August 17, 2020, 09:12:52 AM »

Yes I'd definitely be looking at using something that forms a bead along there, and doing so on both sides. I think Cyanoacrylate is not the answer to this one.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Fixing a crack/split between the fondo and the frame
« Reply #12 on: August 17, 2020, 09:32:03 AM »

To be fair, in Gonk's post, he mentioned using CA glue only as a final seal (if necessary) after repairing the crack with PVA/wood dust. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #13 on: August 17, 2020, 09:51:02 AM »

I would use a good wood glue rather than superglue
I have used PVA. I'm not sure how good of a glue it is, but I think I've managed to spread it nicely inside the gap.
In any case, I will update you with the results.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Fixing a crack/split between the fondo and the frame
« Reply #14 on: August 17, 2020, 10:03:24 AM »

So it’s a failed joint.  Run a bead of glue into the angle, if possible on both sides of the fondo.  Ideally use the same kind of glue as originally was used.

Would a hide glue be appropriate?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Fixing a crack/split between the fondo and the frame
« Reply #15 on: August 18, 2020, 09:39:03 PM »

Results seem to be promising. I've sealed the other known holes and assembled the box, which preserved air relatively decently and definitely didn't leak from the glued location.

I am a bit bothered, though, by the warping of the wood there. The fondo is curved a bit outwards (probably why there was a split in the first place). I hope that doesn't cause problems between the fondo and the reedblocks/pallets.
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal