Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air Button spring on Dino Baffetti  (Read 1733 times)

0 Members and 1 Guest are viewing this topic.

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Air Button spring on Dino Baffetti
« on: September 10, 2020, 11:10:14 AM »

Any thoughts on the best way to replace the air button return spring on my Dino Baffetti?
Thanks!
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Air Button spring on Dino Baffetti
« Reply #1 on: September 10, 2020, 11:22:31 AM »

There are threads on this but the consensus may be a Credit card I think Rees is the expert??
Logged
Mark Taylor
Folkloristmark

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air Button spring on Dino Baffetti
« Reply #2 on: September 10, 2020, 11:23:39 AM »

This a common problem and a major design fault. I have repaired too many of these over the years.
You would think that they would have cottoned on by now.
Just this morning I have done this very job.
The problem is that Dino Baffetti use a thin piece of aluminium which cracks under metal fatigue due to being constantly flexed.
My answer is to replace with flexible plastic cut from a milk carton, credit card, etc.
So, remove the base plate and drill out the rivet being careful not to melt the plastic baseplate.
Detach the broken metal piece from the lever.
Cut a piece of plastic to fit (depending on the thickness of your milk bottle you may need to use two layers of plastic glued together).
Match up the holes and drill through the plastic.
Attach the mechanism using a 3.5mm pop rivet with a washer on the back side.
Ensure the lever is aligned centrally in the slot then re-attach the baseplate.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Air Button spring on Dino Baffetti
« Reply #3 on: September 10, 2020, 11:24:08 AM »

I have done many of these repairs, I use a cut off of a hotel card entry card. This seems to have a far longer life than the metal in the original installation. I extend the plastic to cover the whole length of the button then, after a delicate adjustment to the metal rod coming form the air button mech, it gives for a far smoother operation.


You will have to remove the foot, drill out the rivet holding the proven metal part, I then replace that with a countersunk bolt and nut.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air Button spring on Dino Baffetti
« Reply #4 on: September 10, 2020, 11:26:40 AM »

Same here but the material I use is a more suitable sheet metal.  It’s a Nickel alloy the same stuff that Shaw whistles are made from.  Dave Shaw who makes them lives near me and gives me some of his offcuts!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JohnJ

  • Member
  • *
  • Offline Offline
  • Posts: 26
    • JJ's Stuff
Re: Air Button spring on Dino Baffetti
« Reply #5 on: September 10, 2020, 12:07:55 PM »

Thank you all for getting back so quickly with your suggestions.
I'll go with the credit card method - not only will it work, it will stop me spending on my card!
Thanks again!
Logged
Hohner B/C, D/G, & A/D/G, & Maestro D/G

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Air Button spring on Dino Baffetti
« Reply #6 on: September 10, 2020, 03:34:57 PM »

It would be tempting to go with a true spring material, though I don't doubt that credit cards and milk bottles outlast a piece of thin aluminium sheet.  Aluminium is inherently weak in the sense that it is extremely prone to having fissures within its structure, so flexing it soon extends these into cracks and the part fails.  Now a nice piece of bronze spring sheet like a clock maker would use...  But where do you get materials nowadays?  Used to be able to go into a clock maker/watch repairer on the high street in any town.  I suppose a reed lifter could be cannibalised?

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Air Button spring on Dino Baffetti
« Reply #7 on: September 10, 2020, 04:01:29 PM »

Rob,  that’s why I use my supply of nickel silver offcuts.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air Button spring on Dino Baffetti
« Reply #8 on: September 10, 2020, 04:02:22 PM »

Spring material is not required, it just needs to be flexible. The spring on the air button mechanism is quite sufficient.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Air Button spring on Dino Baffetti
« Reply #9 on: September 10, 2020, 06:24:02 PM »

Same here but the material I use is a more suitable sheet metal.  It’s a Nickel alloy the same stuff that Shaw whistles are made from.  Dave Shaw who makes them lives near me and gives me some of his offcuts!

I've done only one of these; I used a strip of nickel silver sheet and the box's owner is still happy with it, so it must be working. The biggest problem I found was removing the foot without causing damage to the plastic endplate. Why DB go for such a cheap & repairer-unfriendly construction is beyond me.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Air Button spring on Dino Baffetti
« Reply #10 on: September 11, 2020, 11:58:09 AM »

Sorry if my ramblings were wandering off topic.  I was just hoping to emphasise that aluminium is probably the worst choice of materil for this application.  As Rees points out, it isn't really acting as a spring, only in so much as it prevents the air button wobbling around, but a spring bronze would have great longevity in this application - it can flex indefinitely without cracking.  I have heard of these hinges being repaired by screwing a strip of belt leather in place, though that will allow the button to rock a little.

Over the years i have cut up credit cards as material for similar jobs, but as I tend to carry my wallet in my back pocket I'm only too aware that constant flexing can snap them.  This is simply overcome by a Christmas gift one year - a card sized bottle opener in stainless steel. With that in the wallet it doesn't flex at all!

Rob.
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Air Button spring on Dino Baffetti
« Reply #11 on: September 11, 2020, 01:14:04 PM »

Why DB go for such a cheap & repairer-unfriendly construction is beyond me.

I believe their newer boxes, at least the carnivals, no longer work in this way, and have a more robust pivot. Felt a lot nicer to play, in any case.

The DBII I used to play had a repaired air button with several layers of metal at the rivet end to I assume discourage a failure, that honestly felt quite heavy under the thumb. The callus on the side of my thumb has long gone away now I don't play that box, so, whatever your solution, don't over build it I guess!
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Air Button spring on Dino Baffetti
« Reply #12 on: September 11, 2020, 01:28:02 PM »

My opinion is that air buttons, no matter what type, should not be a part of the base plate.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Air Button spring on Dino Baffetti
« Reply #13 on: September 11, 2020, 02:47:16 PM »

I'm on my second credit card repair on my Oakwood DB, first one lasted several years (longer than the ali original!). I keep a little resealable plastic bag in the carrying case side pocket with bits of credit card and double-sided sticky foam tape to fasten it down -- with a Swiss Army knife it takes about ten minutes sitting outside the pub to repair it... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Air Button spring on Dino Baffetti
« Reply #14 on: September 11, 2020, 04:19:40 PM »

Why DB go for such a cheap & repairer-unfriendly construction is beyond me.

I believe their newer boxes, at least the carnivals, no longer work in this way, and have a more robust pivot. Felt a lot nicer to play, in any case.

Interesting; I don't get to see many (any, to be truthful) current-production boxes here; there are, as far as I am aware, only a handful of melodeons on the island (most of them probably mine!) and all the ones I ever see are anything but new.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Air Button spring on Dino Baffetti
« Reply #15 on: September 11, 2020, 05:14:38 PM »

Spring material is not required, it just needs to be flexible. The spring on the air button mechanism is quite sufficient.
I fix a similar button arrangement on my recording king (not original) that failed at the pivot point.
I just used a piece of piano felt material that I had left over from bushing work, glued it to the bass plate and the bottom of the button/lever which are on the same plane. Works well, I don’t know if it will stand up over time.
And as you say plenty of spring on it.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal