Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bachenbulach reed fitting  (Read 1333 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Bachenbulach reed fitting
« on: September 15, 2020, 11:46:27 AM »

I have taken on a very nicely built Bachenbulach 2.5 row, 3 voice, 2 register, 30 button box in Bb/Eb.  1930's ?, Swiss made and looks/feel's it.  The reeds are held to the blocks with a leather 'trim'/gasket to the reed end that butts against the block, which has a slight rebate and a tiny 'L' nail/sprig at the opposing end of the (Dix) reed, which is a common enough means of fixing, but not one I have seen with no other means of bedding down/gasket/wax?

There does not appear to be any gasket material at all, just zinc plate direct to finished wood.  Despite this minimalist form of construction, some flappy valves apart, for all her age she sounds very promising and is very air tight.

I am inclined to try to use some modern materials after the re-valving process, to optimise future air tightness.  Despite the extra buttons it is not an overly big/heavy box, partly due to the reeds being tightly placed, which makes it coincidentally unsuited to waxing.  Not impossible, just unsuited.

I was recently sent a 'Promo' by a Luthier company for NEC tape, double sided - lo-tack one side, hi-tack on the other - and I am considering utilising this to attach some Mulberry paper ( or similar ) to the blocks, then use a Craft Knife to cut out the individual aperture's for the reed positions, to make a thin gasket to assist the seal.  It would be lo-tack, '0' residue face to the wood.

I think (any form of ) leather or Olovisc would be too thick to bed the reeds on and devilishly difficult to cut to the 'tight' proximity of neighbouring apertures.  Mulberry Paper has a little substance to it.

I appreciate it may be a heresy to use the "sticky backed plastic" of our Blue Peter youth, doubly so 'double sided', but would welcome comment.  I did consider mentioning Hylomar but thought that would blow gaskets completely...... 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bachenbulach reed fitting
« Reply #1 on: September 15, 2020, 12:17:46 PM »

If the blocks are built to have the reeds fitted direct to the wood surfaces then I would not attempt to change that.   The surfaces in question must have been finished to a high standard and designed to be airtight without a gasket.  In addition the reeds will have bedded it to the wood to some extent.  I've not worked on this style of block before, but with older instruments it is important to go with the original methods wherever possible and only consider changes if the original build is obviously defective.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Bachenbulach reed fitting
« Reply #2 on: September 15, 2020, 12:39:52 PM »

Hello Nigel,
I have one of these, also in Bb/Eb. It is a very nicely made instrument, and the reeds are the sweetest I have ever heard. Mine similarly has no gasket material whatever, and it seems to work just fine without it. So I would echo Theo's suggestion of keeping this system.
Mine has a kind of swell box shutter arrangement in the grill to quieten the treble side. Does yours have the same?
I have de-clubbed mine, and removed the thirds. When I get time, I intend to make it a 12 bass.
Enjoy!
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Bachenbulach reed fitting
« Reply #3 on: September 15, 2020, 01:06:01 PM »

I have found that Theo's advice is always impeccable.
Also, I would suggest that using any kind of gasket would alter the sound which the reeds make, and therefore they should certainly be mounted as the original designer intended.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Bachenbulach reed fitting
« Reply #4 on: September 15, 2020, 01:23:20 PM »

Good sense here also Edward, the reeds in the better quality Bachenbulachs are really VERY sweet sounding.
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Bachenbulach reed fitting
« Reply #5 on: September 15, 2020, 03:47:15 PM »

All noted - thanks for that.  Advice will be taken on board.  Dave - no shutters on the treble end.  I intend to de-club it in due course.  They are certainly well made and I do not want to do any harm.
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Bachenbulach reed fitting
« Reply #6 on: September 15, 2020, 06:30:55 PM »

I am not sure I could get my head around expanding the bass/chord end with the multi lever application, acting on pallets to bring in reed plates for 7th's ?  Basses share reeds via the lever arms too, so I think '8' is great an probably enough for now!

It's a Model 45, Ser. No. 1852, marked on all parts throughout the build. 
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Bachenbulach reed fitting
« Reply #7 on: November 08, 2020, 08:54:57 PM »

An image of the Dix reeds for 'reference'.  1930's vintage ? they appear from the rivets to be handmade ? on alloy plates.  As above, not waxed, and very tight, side by side on the blocks.
   
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Bachenbulach reed fitting
« Reply #8 on: November 16, 2020, 03:14:20 PM »

I set about re-valving and fixing the reeds but found that the 'L' shaped "sprigs" did not take to being/removed & re-fitted, ie. once out, they didn't really pinch the reed plates on re-fitting.  Needing to re-tune meant that I would have to fit/re-fit a number of times, so I looked to the construction of the Socin, from the other side of the Alps and built at around the same time in the 1930's. 

The Socin, which was clearly built to a standard rather than a price has a leather gasket and round headed screws to hold the reeds in place.  They are 'notched' slightly for the shank of the screw.  I had de-clubbed it and replaced the 'C/C' reeds with V.A. ones, so had a spare trio in L/M/M. 

This is a Bb/Eb box, so needed a Bb/C to de-club in turn, which meant I could re-fashion them, being similarly hand-made, albeit not "long bladed" like the Dix ones.

Having established that "something" needed to be done, the something turned out to be replicating the Socin fixing system.  I did end up using the Olovisc instead of leather and "Servo Screws" instead of round head's as they offer two advantages - 1, they have a built in washer as part of the head & 2, they drive via a 2mm Allen/Hex Key, so no slippage issues.

I have dried up the tuning to some extent based on the advice & guides on the Forum. 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal