Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Painting bellows papers?  (Read 1393 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Painting bellows papers?
« on: September 21, 2020, 09:32:42 PM »

Has anyone tried painting bellows papers with poster paints? If so, how did it turn out, please?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

arty

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1465
Re: Painting bellows papers?
« Reply #1 on: September 22, 2020, 06:53:11 AM »

I have never tried painting bellows, so I can’t answer your question from direct experience.
Speaking as a painter, who has used all types of paint, I certainly wouldn’t use poster paint, (gouache). The reason is because, when it dries, it becomes brittle and, because of it’s high chalk content, is prone to cracking. On the moving surface of bellows, I fear it would crack and peel off, especially if painted on a little too thickly. There is also the problem that poster paint, when dry, will lift off very easily when it comes into contact with any moisture. Just being touched by damp hands will likely smudge it, no matter how old and dry it is.
If I had to suggest any type of paint for this purpose, I think it would have to be acrylic, really well watered down. When dry, acrylic is waterproof and flexible, (basically you are painting with plastic). Nowadays, one can buy acrylic inks, which might also be worth considering. I would stress, keep the paint really thin and watery -  like a watercolour. As soon as you use thicker paint, even acrylics, it will be prone to cracking when the instrument is played.
Obviously, oil based paints would be inappropriate and watercolour too susceptible to any dampness.
Good luck with this Winston, I hope this helps.
Logged
Pre-Pokerwork C/F, Castagnari Laura G/C, Beltuna Sara 3 A/D, Castagnari Sander Special D/G

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Painting bellows papers?
« Reply #2 on: September 22, 2020, 08:01:18 AM »

Has anyone tried painting bellows papers with poster paints? If so, how did it turn out, please?

You’ve got a real problem here Winston. If you go anywhere near bellows papers with something damp, they will bubble all over the place. Ideally they should be coloured before applying the paper to the bellows.
  I would suggest using a wide felt tip pen, they’re spirit based and should leave the paper in place.
 Best o luck.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Painting bellows papers?
« Reply #3 on: September 22, 2020, 08:53:14 AM »

Firstly; thank you both for your wise words, they're most appreciated. It looks like I've bitten of more than I can chew. Mind, I could try the magic marker route.
Anyway, thanks again, this is certainly the place for good advice!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painting bellows papers?
« Reply #4 on: September 22, 2020, 09:13:57 AM »

A good while ago a young band mate spray painted his accordion bellows black.  He thought it looked “cool” but when he came to sell it nobody would go near it!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Painting bellows papers?
« Reply #5 on: September 22, 2020, 11:26:03 AM »

I have "re-papered" a couple of sets of bellows.  Starting form a skill-base of '0'!

It was "a bit of a pain".....I had been warned off doing it unless absolutely necessary by the wise Lester at The Fleece, but, when I tried to moisten the tape ( old Presswood ) despite taking great care, the paper disintegrated more quickly/easily than the tape. 

Anyway, that one went well.....it led me to do another "with intent" and that was ok too.  I probably didn't follow/stick to any rules and cardinal sins were no doubt committed, but it worked out well and I would be confident to do others.

I used Hohner Shop Papers for the first, learnt some lessons from that and did one with Hewit marbled paper latterly.  Their various paper, glue and 'leatherette' products are very useful and they are very helpful people to deal with, I found.

I was "surprised" when the German 'commercial' papers arrived to find they come as 'strips' - I expected a roll/sheet.  They were long enough to do a side and an end, so needed cutting, but via a template, for the 'V's and an overlap on a ridge, which is covered by the 'next' piece &  the tape in due course, it went well.  The leather corners, even on a 1930's box stood up well.....as did the folded card.

The bellows came up really 'sturdy' afterwards.  If anything, I thought the commercial paper was a bit 'heavy' in the grade compared to the original.  The Hewit marble paper comes as a 'large' sheet, but cuts nicely and I used the same template.  I think it took 3 sheets to do a standard Pokerwork bellows.  The fiddliest bits are the metal 'corners' but, they do 'ping' off with a suitable tool and a wooden clothes peg ( half of ) opens the crimp just sufficiently to get them back on before using some soft jawed pliers to re fit them.

 
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Painting bellows papers?
« Reply #6 on: September 22, 2020, 11:33:37 AM »

I've dyed the bellows on my one-row Hohner (4-stopper) black. It was very messed up cosmetically when I got it, so I went for 'everything black' - buttons, keyboard, body, stops, bellows, bellows tape, straps, new growlbox etc. It actually looks neat.

The bellows were beyond ugly with coffee stains, nicotine etc., so it was either trying it out, or tossing them out. I used Fiebings leather dye, which I think it spirit based. Off went the old bellows tape, all surfaces was wiped down with a dry rag, and I made a prop to keep them open. I used the dye on a small soft artists paintbrush, being very thin in viscosity, it took to the paper and leather quickly without sopping it all over. I did what I could to use as little as possible.

They work pretty well for the all-black, but the cleanup was a pain. All the metal corners took some dye and had to be cleaned off from one end to the other before bellow tape was added - black is forgiving, thankfully, but I didn't want to risk rub-off clothes. Since drying, I have never had any issues with color rubbing off or fading, but I have noticed that there a few spots where the dye didn't stain as well due to old glue residue.

Was it worth it? Yes, but it took a LONG time, and new bellows might have been a just as good solution if the box wasn't just a project for fun, based around a worn out Hohner. For a more expensive box, I would have gone for new bellows.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Painting bellows papers?
« Reply #7 on: September 22, 2020, 11:42:03 AM »

"spray painted his accordion bellows black"

Even mind readers on here!

It's a black Erica, which is getting the black stripy bellows tape on, and I thought that black papers might have given it a bit of a Johnny Cash "Man-in-Black" look! But I need to sell it when it's finished, so I'll take heed Dear Leader; thank you for the warning.

Turn again Whittington (or Winston, as the case may be!).

I see that Nigel.H has also responded whilst I was typing. Thanks for that info, Nigel, but I'm not that keen, and it's not really necessary anyway. Food for thought for another project maybe?

And Lars! Thanks to you also. But, as I said, they aren't too bad anyway and it was just a passing fancy, really.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Painting bellows papers?
« Reply #8 on: September 22, 2020, 01:49:25 PM »

If I was going to paint it......having painted some Mull for a grille - I would use a fabric 'spray' paint/rattle can.  It has good adhesion - given how long it took get off my hands - about as good a level of ongoing flexibility as you will get, given it's intended use and comes in a decent range of colours, including black 8)    Tin's tend to be small compared to Auto sized ones, so coverage would need to be calculated for a whole bellows. 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal