Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Attaching non-easily-accessible pallets to their rods  (Read 653 times)

0 Members and 1 Guest are viewing this topic.

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Attaching non-easily-accessible pallets to their rods
« on: September 29, 2020, 04:25:08 PM »

I'm on lockdown-holiday so it's time to continue working on my Cornelia project.
The pallets desperately need refacing, which is not a big issue, gluing them back onto their rods is more of a riddle:

While there are two rows which I can reach pretty conveniently with my hot glue gun, the last one is obstructed by the treble mechanism.
Any hints?
Did anyone manage to create an extended nozzle for a hot glue gun?

Many thanks!
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Attaching non-easily-accessible pallets to their rods
« Reply #1 on: September 29, 2020, 04:40:22 PM »

Maybe you could use another type of glue for the back row?
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Attaching non-easily-accessible pallets to their rods
« Reply #2 on: September 29, 2020, 05:09:49 PM »

I found when the gun is really hot and the glue flows really easily, I can dribble the glue into the right place.
Holding the job in the other hand at the correct angle is a little more tricky than you'd expect, and blowing on the pallet once the glue has landed cools it enough so it doesn't just carry on and flow off the side of the pallet.
Clever construction though, isn't it?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Attaching non-easily-accessible pallets to their rods
« Reply #3 on: September 29, 2020, 05:16:08 PM »

I think with that mechanism you can remove the whole keyboard along with the two outer rows of pallets, and unhook the short levers which lift the long levers attached to the back row pallets.  Leave the long levers in place then you have good access for securing the pallets.

If that doesn’t work I would use a cold glue, such as pva or fish glue applied to the pallet with a syringe,  or applied to the leather patch and then position the patch with long tweezers. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal