Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner Club III BS left hand questions  (Read 4326 times)

0 Members and 1 Guest are viewing this topic.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Hohner Club III BS left hand questions
« on: October 03, 2020, 10:59:27 PM »

Hi. Just picked up a Hohner Club IIIBS from Theo who switched the treble notes around to match the reversals system I use.
I could not be happier with this box, considering its age, and price. I've been playing it all evening and will feel sore tomorrow (it's not light).
I have some questions about the left hand. I think Squeaky Pete did some work on his, but I can't find the thread.
The left hand uses an accordion like mech which looks very complicated and is heavy on the touch and just heavy.
1 Can the springs be lightened, (the bass buttons use pallets furthest away from the pivot and are mighty stiff)?
2 The air valve is massive, but the button is in the wrong place for my hand (too far from the chin end and too near the buttons). Moving the air button will reduce the leverage even further. The spring for that is also incredibly stiff - is that the thing to start with? Any ideas or previous solutions?
The sound of the basses is glorious, but is there a simpler mech solution?
Surprisingly the right hand is fabulous on all 3 register options even against the massive bass sound. I mainly bought it as a cheap experiment in choosing possible accidentals for a 3rd row, and it's already giving me good feedback there. Any mods made by others would be good to hear about. I'll upload a video tomorrow.
« Last Edit: October 03, 2020, 11:05:16 PM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Hohner Club III BS left hand questions
« Reply #1 on: October 04, 2020, 09:49:23 AM »

Hi, suggest you have a quick look at my post - Another Lockdown Modification 3bs.
If you like chords with no thirds, filing the little peg off the vertical lever that operates the third pallet
will stop the note from sounding and also reduce the effort required to push the button down by a third.(2 pallets opening instead of 3)
The air pallet is the size of a barn door which is probably why it needs a hefty spring.
The mechanism is really bulky and clumsy so if you could get by with less air, I would suggest ripping it all out and replacing it with a more modern metal mech. & smaller pallet.
I would have done this on mine, but didn,t bother as I,m in the process of building a 40+ bass side similar to my club 2b frankenbox- but without the step at the back.
       Good luck, John.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #2 on: October 04, 2020, 11:00:01 AM »

I don't think there is an easy solution. The mechanism is the heart of the bass system. And it uses one less reed position than the usual system as it ties in one shared plate.
The thirds are mixed with root and fifths so the reed plates have notes that are only a couple of semitones apart. This can be fixed with taping off the relevant tongue but it won't help the overall effort required.
The air valve is gigantic as the typical Bavarian club player plays mostly on the draw and needs to dump air in a split second ready for the next long drawn phrase.
The spring is accessible if you pull out the pivot of the air button. You may be able to reduce the strength of the spring. There's also a lot of friction in this system and a little graphite might help if you can get it into the bearing parts.
It's a huge amount of work to shift the air button and I've not been sure it's worth the effort. If you are used to the push button rather than a lever (like pokerwork) the button could be made longer in an enlarged slot so it's in a better place for you, but the thumb effort won't change. I changed the shape of my button so it felt more like my Pokerwork/Liliput/Pariselle boxes.
I'll poke about in mine later and see if I have any ideas.

Ed. What's the layout and is lh still std club?
« Last Edit: October 04, 2020, 11:07:55 AM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #3 on: October 04, 2020, 01:06:14 PM »

Hi Pete,
Still clubbed left hand - which also means that I don't have the option to use the push Ab bass and chords to keep the air management. I might also try a hand retention strap to keep my left hand lower so that I can get the thumb over the button. I might also replace the rounded plastic button with something broader. I suspect the retention strap is the first port of call.
The removal of the thirds is something to consider. I don't like the idea of filing off the peg - imagine if I picked the wrong one, but I do prefer 3rdless chords anyway - the push C minor 7 option (C major chord avoidance) doesn't really work so well with the 3rds in.
Happy days.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #4 on: October 04, 2020, 01:25:00 PM »

Here is the air button.
The plastic bit is glued around a much smaller block of beech. The beech can be cut down to accept a new button.
Once you get the plastic off, and it's pretty flexible, you can glue on a new timber piece whatever shape you like.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #5 on: October 04, 2020, 02:06:14 PM »

Thanks, Pete. I suspect I'll need to cut a larger hole in the base plate, and try a combination of lightening the spring and extending / enlarging the button. New bass straps might also help.
Here's quick video. I'm aware I'm playing music that doesn't really suit it - I need to work out whether to give the bass notes time to sound or not. Listening back I am swamping the right hand, so maybe losing the thirds, or playing different music, or having a 12 bass non club conversion.
I'm not sure if the full might of the sound comes across in the video, but it's epic. Really only bought it to play recorder tunes on, so I'll try that  too (no left hand).
Here's what it sounds like (playing is not the most appropriate, as I'm still finding my way around the box).
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Hohner Club III BS left hand questions
« Reply #6 on: October 04, 2020, 02:15:27 PM »

I don't like the idea of filing off the peg - imagine if I picked the wrong one, but I do prefer 3rdless chords anyway

Hi Pete and Playandteach

It's usually possible to bend the little rod that catches the peg to one side...making the move to thirdless chords reversible....

As regards de-clubbing, this is a problem because the lower/inner chord (what would in DG terms be the C/C chord) shares reeds with the upper/outer (which would in DG terms be the D/A chord). The way I get round this is to disconnect the lever from the lower/inner to the shared notes...they remain for A/D. The declubbed chord is therefore reduced from 6 reedplates to 4 reed-plates, but at least those reeds belong ONLY to the lower/inner Chord, I then replace the reeds as necessary to give declubbed bass and declubbed chords, installing either thirdless or standard triad chords as required. You have the option for the full triads because -aside from the linked notes to the basses - you are left with a pair of reedplates (one either side of the chord-block) which you can set up with either thirdless or triads notes as you wish.

Cheers!

Mike
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #7 on: October 04, 2020, 02:27:44 PM »

Here you go Pete. This is probably what you were looking for.
This was my first real project.
There is a YouTube vid near the end.
http://forum.melodeon.net/index.php/topic,23844.msg284084.html#msg284084
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Hohner Club III BS left hand questions
« Reply #8 on: October 04, 2020, 07:51:16 PM »

Hi Pete, I love the way that sounds! I got my hands on an old Club not long ago - different model and bass mechanism, but similar stonking basses, they're just a delight aren't they? I actually love the way those tunes sound on that box, I feel like it gives them a nice weight, though I suppose there is a small risk of things getting a bit muddy.

I'm afraid I don't have specific advice about the Club III BS mech, but the hand strap sounds like a great idea to me - I have one on my Erica and find it very helpful for stabilising the left end and it has increased my confidence using the air button no end. Based on that experience it seems like it would come in handy in your case too, even though the situations are not identical. It's simple enough to do - just a strip of fabric (hemmed if you want to be neat), both ends secured by the bottom bass strap screws (I sewed a large button hole around the area the screws pass through to prevent it from tearing out). I adjust the length using just a safety pin, which is pretty basic, but  you could use velcro or a buckle if you wanted it to be fancier, or not bother with adjusting it if you can get a good fit and your fabric doesn't have much stretch.

Another potentially relevant thought: I've got a couple other bass-hand modifications on the Erica, a roughly shaped block of pine to sit in my palm which helps me maintain hand position, and a much larger home-made air button, which also made a big difference to my air button control. Based on Squeaky Pete's image of the Club bass button I would guess you could pry off the plastic and screw or glue on any old shape that takes your fancy. That might even make it possible to "extend" the button to a position that is more comfortable, but certainly I would expect it to allow you to find a shape that makes your thumb feel stronger, if that makes any sense. I've attached a photo of Erica's bass end for illustration purposes.

Anyway, these are all sort of tangential ideas - I wish I had something more substantial to offer, but thought I'd chip in just in case any of this is remotely helpful. Looking forward to seeing how this project unfolds, good luck!
Logged
GC Erica

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #9 on: October 04, 2020, 08:32:52 PM »

That's great help, Kon. Yes the playing is very muddy at the moment, partly because that's my only way to dump air, and of course because I wanted those low basses to be heard, but a quick stab doesn't get them going. On the other hand, I've been playing some single voice recorder music and it has pretty good ability to follow phrasing. The tuning and response is not all perfect, and I need to think about how much to invest in what was an experiment - I still want a 3 row GC, and don't want to spoil the chance of that by over spending on a whim.
How do you get the bass plate on and off with the oversized air button? I think I'll make a whopper and trim it down - I agree that getting it somewhere other than the painful place it is now will make it seem lighter.

Pete, can you get the air button out without having to remove the mechanism? It looks like a bent pin as the axle.

Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #10 on: October 04, 2020, 09:26:17 PM »

The end plate just unscrews and pulls off. Take one end off the end strap first or you won't get it past the air button.
There's a locking nail holding the pivot in place. Long nose pliers or a small screwdriver to prise this off then long nose pliers to wriggle the pivot pin out. Nothing else needs to be disturbed.
I've got a few spare buttons, I'll glue a longer piece on one for you and you can trim out the slot to suit. The pivot hole might be a fraction out but you could probably bribe the CDT man with a biscuit or two to run through a drill bit in a pin chuck.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #11 on: October 04, 2020, 09:30:33 PM »

Hi Pete, I'll take you up on that offer - what I was asking Kon was how he took the plate off with an air button cap that was bigger that the slot. But working on a spare button would be a great advantage. So I can keep playing it in the meantime. Do let me know about postage etc. Does the foot part of the air button mech come out or is it glued in place?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #12 on: October 04, 2020, 09:35:58 PM »

I take some photos inside a dead box for you.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #13 on: October 04, 2020, 09:43:08 PM »

I appreciate the help. Just spent a couple of hours playing it on the single voice. Right hand only - proper wind instrument.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Hohner Club III BS left hand questions
« Reply #14 on: October 05, 2020, 12:26:29 AM »

Ah, I'm glad that it's useful P&T! Good point about removing the end plate - on the Erica the air button sits on a metal spike, and I just pull it off when I need to get into the bass end. Not a permanent solution, but it's good enough for now. But that wouldn't work with the Club air button of course, so it will take a bit more ingenuity to solve. Having a spare air button will hopefully allow you to experiment! I suppose you either need to make the oversized button easily removable from the wooden lever (perhaps glue a bit of dowelling to the lever, to fit snugly into a hole on the underside of the button, with a small screw perhaps to secure it?) - or make it narrow enough that you can still fit it through the slot in the end plate. Last ditch option would be to enlarge the slot in the end plate, but that doesn't seem at all attractive. I hope you find an option that works!
Logged
GC Erica

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #15 on: October 06, 2020, 03:41:14 PM »

As much for anyone else thinking of poking about in the guts of a club box.
Here is the button with the plastic cap off, with a long walnut button/lever and with it in place.
It's not glued yet so if it needs modifying or if you want to do it yourself, I can stop now.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #16 on: October 06, 2020, 07:38:00 PM »

That's really generous of you Pete. I think I might need to extend its width too, so it might be worth leaving it unglued - gives me more options. I'll be tweaking a couple of the accidentals, what do you have on yours?
This one is C#/B  G#/E   E/F#   B/C#   C#/C   E/F#   C#/B
I'm going to lose the C for a B pull (I've got Cs in both directions already), but I'm toying with a push Ab higher up, just don't know where.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club III BS left hand questions
« Reply #17 on: October 06, 2020, 10:01:15 PM »

Here's the layout. It's the same on the DG box too.
The walnut bit is about 10mm thick as that's what I have in stock but the plastic cover amounts to nearly 12mm so there will be more clearance in the slot (which you will be enlarging anyway).
It's well oversized but it's still a bit small to trim on any machine if you value your fingertips. If you need less projection, glue a sheet of say 100 grit abrasive paper to some ply, rub it down by hand with the board laid flat, and do it slowly.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #18 on: October 06, 2020, 10:31:41 PM »

Don't worry about my fingers - they are fairly worthless these days. Seriously, I'm ok with safety and also quite ok at finding clumsy solutions. I'm also very good friends with an expert guitar maker, so I can expect help with machinery (but I doubt that it's needed).
I've been playing it again this evening - with recorded stuff. I think I need to get the Bandoneon tuning just right, sort out the woofiness of the accidental row and try to lighten the springs in the right hand.
The fundamental reason for buying this was to toy with accidentals and to see at a low cost whether I enjoy a bigger box. That last bit is still out for the jury, but I DO enjoy having a large lung to help with expresssion, and I really like having access to more accidendals.
The downside is how I'm still transposing - normally on the fly - the recorder tunes into my usual home keys rather than fully engaging with a wider set of keys.
It will also give me (once I get the reeds fine tuned) a feeling of whether I want Bandoneon tuning or MM in what ever box I end up with.
By the way, though, the tuning is pretty solid already, I just have a particularly low tolerance of minor wobbles.
All in all a very interesting experience. Thanks again.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner Club III BS left hand questions
« Reply #19 on: October 08, 2020, 08:25:42 PM »

Here's a quick link to what I've been playing on this beast. Just using the single voice to play some Telemann. Still finding my way around it, but really enjoying it. The video doesn't do the sound justice.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal