Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fix holes in Liliput bellows  (Read 893 times)

0 Members and 1 Guest are viewing this topic.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Fix holes in Liliput bellows
« on: October 12, 2020, 04:32:32 PM »



Which is the best way to fix these holes in a Liliput bellows
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fix holes in Liliput bellows
« Reply #1 on: October 12, 2020, 04:41:22 PM »

Patch the gussets from inside the bellows.  Use the thinnest most flexible leather you can find that is airtight. Chamois is not a good choice. Fine glove leather is good.  The adhesive should also remain flexible when cured.   The gussets will of course then be thicker and the corners may not close completely.  The alternative is to go for a more invasive repair and strip back the edging tape, and the lining paper, remove the metal corners then you will be able to remove the remains of the old gussets and replace them.  It's a tricky job though and the results may not be much better than the internal patching.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Fix holes in Liliput bellows
« Reply #2 on: October 12, 2020, 04:54:05 PM »

"It's a tricky job"

Theo; the Master of understatement! I really dread having this problem, I tried once before to patch a couple of corners but it was then that I realised that I am completely ham-fisted. EEEERRRRGGGGHHHH!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Fix holes in Liliput bellows
« Reply #3 on: October 12, 2020, 05:10:51 PM »

if it's one or two you need to fix, from inside patch works OK as Theo advised but don't be suprise to have more gusets failing in near future if you play it often.
old belows in poor condision often fail on gussets , espasialy black guseets on some old Hohners  >:( 
 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fix holes in Liliput bellows
« Reply #4 on: October 12, 2020, 05:50:16 PM »

Gusset repairs are best viewed as a temporary repair which allows you to delay fitting new bellows.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Fix holes in Liliput bellows
« Reply #5 on: October 12, 2020, 05:56:29 PM »

There are only 2 corners. The others look very good. Very! 

I'm going to do something like Theo suggests, method 1. Unfortunately I do not have thin gloves. And in these times I do not go to flea markets and look. So I'm trying to come up with something else.


But now I'll fix something like this:
https://www.youtube.com/watch?v=NFrUKEeQ1UU

Also a temporary fix    (:)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Fix holes in Liliput bellows
« Reply #6 on: October 12, 2020, 06:03:22 PM »


I'm going to do something like Theo suggests, method 1. Unfortunately I do not have thin gloves. And in these times I do not go to flea markets and look. So I'm trying to come up with something else.


If "thin leather" means kid leather, then there are some on ebay
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal